Hibernation-power policy Manager.
My computer has been updated with the hibernate after 10 minutes. He did for several years. He's going to do it anymore. He's not going into standby mode automatically (when the value) or the other. It will only be in hibernation or standby if I do it manually. 'Activate the hibernation' is enabled. The time is set and apply and OK was clicked. Don't know what to do.
Hello
1 did you change on your computer before this problem?
2. you receive an error message?
Follow the suggestions and see if it helps.
Method 1
Run the System File Checker tool.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe) http://support.microsoft.com/kb/310747
Method 2
You can disable and re-enable hibernation on your computer.
How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730
Method 3
Check to see if the problem exists in a clean boot state.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
a.Click Startand then click run.
b.Type msconfig and then click OK.
The System Configuration utility dialog box appears.
c the general tab, click Normal Startup - load all device drivers and services, and then click OK.
d.When you are prompted, click restart to restart the computer
Method 4
Restore the system to a date and time when it was working fine.
How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084
See also:
How to troubleshoot hibernation and standby issues in Windows XP http://support.microsoft.com/kb/907477
Tags: Windows
Similar Questions
-
Power policy Manager unable to set global policy - error message
As my laptop into hibernation after 30 minutes without assistance I would adjust the power settings. However, I get a message saying 'Power political Mananger cannot set global politics' - access denied. Any ideas how to overcome this?
Hi it found on a forum it will be useful
I had a situation on the machine where the administrator could not change
display settings, for example, monitor the shutter delay. After doing
all changes and trying to save a ' Power Policy Manager unable to. "
define a global strategy' message box reported 'access denied '.I finally solved this problem by exporting
EntVersion entVersion
\ControlsFolder\PowerCfg\GlobalPowerPolicy
a working and important machine in the machine problem.If it does not log the computer using an account with administrator privileges, or make a new user and give them administrative privileges and try again with the new user account
Post edited by: bigmac
-
Impossible power policy Manager to define policy - indicates two revision levels are incompatible
Power policy Manager does not work as indicated. Hibernation automatically resumes.
does not work
-
Pro 3 yoga and Hibernation power button
Hello
I have a problem with turn on the laptop after that it goes the way standby mode Hibernate (no doubt).
Since the beginning, I installed Win clean 10 with the latest drivers of Yoga.
Now when I put the Yoga sleep (power button flashes) and after an hour or so later Yoga switch to hibernation (power button stops flashing) I cannot wake it up by pressing the power button. Instead, it shows the Lenovo logo and turns off by itself. After that it works in a normal way - by pressing the power button / stop lights but don't relax after previous hibernation.
Can someone help me with this problem? It is quite annoyng. This means that I always have to save all my work before Yoga put to sleep.
Thanks for any help.
Finally, I managed to solve the problem with the power button. I had disabled setting Fast Boot under windows, and everything works as it should.
-
Hi, please advise, I can't open Group on win Server 2008 policy management, it is said
"To manage Group Policy, you must log on to the computer with a domain user account.Hi Cucu KurniaPutra,
Thanks for asking this question to Microsoft Community!
The problem occurs in Windows Server 2008 Network, please post your request on the Microsoft TechNet forums to get help.
Here is the link:http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
Kind regards!
-
Unable to connect to Policy Manager
Hello
I use Weblogic Server with ADF DURATION 11.1.1.7.
I'm working on the security of Web Services. When I try to open policies of GOSA, I get an error saying "unable to connect to the Policy Manager. After having browsed a few sites, I got to know this wsm-MP should be deployed on the administration Console. I have deployed the wsm - pm.ear and I restarted the Weblogic Server. But after deployment, I'm not able to start the deployment. His failure in the State. When I try to start it, I get the exception below.
weblogic.application.ModuleException: [HTTP:101216] Servlet: 'PolicyManagerValidator' failed by preloading at startup in a Web application: "/ wsm - am '. java.lang.RuntimeException: java.lang.reflect.InvocationTargetException at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:2276) at oracle.wsm.policymanager.web.PolicyManagerValidator.initializeWSMPM(PolicyManagerValidator.java:186) at oracle.wsm.policymanager.web.PolicyManagerValidator.init(PolicyManagerValidator.java:174) at weblogic.servlet.internal.StubSecurityHelper$ (StubSecurityHelper.java:283) ServletInitAction.run to weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) to weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) to weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) to weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484) at weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425) in weblogic.application.utils.StateMachineDriver.nextState) StateMachineDriver.java:52) to weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) to weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200) to weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247) to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425) to weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) to weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) to weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27) to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671) in weblogic.application.utils.StateMachineDriver.nextState) StateMachineDriver.java:52) to weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212) to weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59) to weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) to weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) to weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) to weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150) to weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116) to weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:149) to weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) to weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) to weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) to weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) to weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163) to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195) to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100) DeploymentReceiverCallbackDeliverer.java:13) to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68) to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke (Method.java:597)) to oracle.adf.share.ADFContext.initADFContext(ADFContext.java:2205).... more than 45 caused by: oracle.adf.share.ADFShareException: MDSConfigurationException met in parseADFConfiguration to oracle.adf.share.config.ADFMDSConfig.parseADFConfiguration(ADFMDSConfig.java:209) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) to oracle.adf.share.config.ADFConfigImpl.getResultFromComponent(ADFConfigImpl.java:533) to oracle.adf.share.config.ADFConfigImpl.getConfigObject(ADFConfigImpl.java:604) to oracle.adf.share.config.ADFConfigImpl.getConfigObject(ADFConfigImpl.java:582) to oracle.adf.share.config.ADFConfigImpl.getMDSInstance(ADFConfigImpl.java:647) to ... more than 50 oracle.adf.share.config.ADFConfigImpl.getMDSInstance(ADFConfigImpl.java:642) at oracle.adf.share.config.ADFContextMDSConfigHelperImpl.getMDSInstance(ADFContextMDSConfigHelperImpl.java:297) at oracle.adf.share.ADFContext.getMDSInstanceAsObject(ADFContext.java:1703) at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:524) at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:432) at oracle.adf.share.http.ServletADFContext.initThreadContextIfNeeded(ServletADFContext.java:345) caused by: oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load the configuration MDS MDS-01329 document: could not load the "persistence-config" SDM-01370 element: MetadataStore configuration of the metadata store use "OWSM_TargetRepos" is not valid. MDS-00929: impossible to find by name "jdbc/mds/GOSA" in the context JNDI while trying to search for "jdbc.mds/owsm" found no subcontext "jdbc." Resolved "to oracle.mds.config.PConfig.loadFromBean(PConfig.java:1014) to oracle.mds.config.PConfig. < init > (PConfig.java:767) at oracle.mds.config.MDSConfig.loadFromBean(MDSConfig.java:1151) at oracle.mds.config.MDSConfig.loadFromElement(MDSConfig.java:1218) at oracle.mds.config.MDSConfig. < init > (MDSConfig.java:781) at oracle.mds.core.MDSInstance.getMDSConfigFromDocument(MDSInstance.java:2788) at oracle.mds.core.MDSInstance.findAndStoreMDSInstanceWithCustConfig(MDSInstance.java:2621) at oracle.mds.core.MDSInstance.getOrCreateInstanceInternal(MDSInstance.java:2118) at oracle.mds.core.MDSInstance.getOrCreateInstance(MDSInstance.java:812) at oracle.adf.share.config.ADFMDSConfig.parseADFConfiguration(ADFMDSConfig.java:146)... 64 more caused by: oracle.mds.exception.MDSExceptionList: SDM-01329: could not load the "persistence-config" SDM-01370 element: MetadataStore configuration for metadata-store-use "OWSM_TargetRepos" is not valid. MDS-00929: impossible to find by name "jdbc/mds/GOSA" in the context JNDI while trying to search for "jdbc.mds/owsm" found no subcontext "jdbc." Resolved "to oracle.mds.config.PConfig.loadFromBean(PConfig.java:1008)... more than 73: oracle.mds.exception.MDSExceptionList:MDS - 01329: could not load the"persistence-config"SDM-01370 element: MetadataStore configuration for metadata-store-use"OWSM_TargetRepos"is not valid. MDS-00929: impossible to find by name "jdbc/mds/GOSA" in the context JNDI while trying to search for "jdbc.mds/owsm" found no subcontext "jdbc." Solved "
Can someone tell me if I am missing something on my Weblogic Server?
Thanks in advance,
Harsha
Hi Harsha,
The OWSM repository is stored in a database, so you need a database connection. Before you configure the new domain, you must run the Oracle RCU (repository creation utility) to create your drawings in your database.
This link may help you with the remote control: https://docs.oracle.com/middleware/1212/core/RCUUG/rcu.htm#RCUUG113
Best regards, Nicolas
-
SINGLETON on POLICY MANAGES the database service. 11.2.0.3
Hello people.
I was faced with a simple creation of SINGLETON SERVICE to an existing base of managed policy on a 11.2.0.3 cluster with two nodes without success so far.
Definition of the environment:
-Node cluster two 11.2.0.3
-Several databases (not important I think) all configured with the same SERVER POOL
-Each database consists of two instances, each one running, one of the nodes form
-Pool one server only
Requirement:
-Databases (DB) with its two instances a need a SINGLETON service performed in one of the servers (Server A).
-If the instance so that the database running on one down, I need the tilt function to Server B.
Result:
-Failover does not work
Official notes, I checked and tested in vain (among many blogs and forums):
gR 11, 2 (11.2) RAC TAF Configuration Admin and policy managed databases ID 1312749.1
Services Database 11 GR 2 of 'Policy' and 'Administrator' managed database ID 1481647.1
Details of all the different components:
Configuration of the database
Status of the databaseB@/u01/oracle> srvctl config database -d DB Database unique name: DB Database name: DB Oracle home: /u01/oracle/product/11.2.0.3 Oracle user: oracle Spfile: +DATA/DB/spfileDB.ora Domain: Start options: open Stop options: immediate Database role: PRIMARY Management policy: AUTOMATIC Server pools: dev Database instances: Disk Groups: DATA,FLASH Mount point paths: Services: DB_srv Type: RAC Database is policy managed
Pool of server configurationB@/u01/oracle> srvctl status database -d DB Instance DB_2 is running on node B Instance DB_1 is running on node A
The service configurationB@/u01/oracle> srvctl config srvpool -g dev Server pool name: dev Importance: 0, Min: 0, Max: 2 Candidate server names: A,B
The service status PRIOR to one of the instances is brokenB@/u01/oracle> srvctl config service -d DB Service name: DB_srv Service is enabled Server pool: dev Cardinality: SINGLETON Disconnect: false Service role: PRIMARY Management policy: AUTOMATIC DTP transaction: false AQ HA notifications: false Failover type: SELECT Failover method: BASIC TAF failover retries: 10 TAF failover delay: 2 Connection Load Balancing Goal: LONG Runtime Load Balancing Goal: NONE TAF policy specification: NONE Edition: Service is enabled on nodes: Service is disabled on nodes:
Service status AFTER on instance is arrestedB@/u01/oracle> srvctl status service -d DB Service DB_srv is running on nodes: A
Tnsnames entryB@/u01/oracle> srvctl status service -d DB Service DB_srv is not running.
Let me know if you need further details.DB_srv = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = cluster.dev.sabre.com) (PORT = 1521) ) (CONNECT_DATA = (SERVICE_NAME = DB_srv) ) )
Any help will be greately appreciated.
Thank you
Alex.
Published by: attitude Sep 19, 2012 21:26Hello
you kill the instance or has he stopped?
If you stop it then it is planned. You must move the service first.
If the instance is aborted abnormally (or the server is killed) it should failover.
Concerning
Sebastian -
Problem with access to the Policy Manager
Recently, I installed Oracle 10.2.0.1 on a machine with Solaris 10 Unix. I made a custom Setup when you install the software so that I could install OLS. I didn't create a database during installation. I created the database after the fact using DBCA. The database has been created and I would now like to create security policies. The problem is that I can't find/run strategy manager. Where is the executable Policy Manager? It is not in the directory $ORACLE_HOME/bin other executable files. How can I run the Policy Manager?With 10g, Policy Manager is a stand-alone tool, managed by the installation of the OEM Java Console on the CD of the client and then once installed run * $ORACLE_HOME/bin/opm *.
-
Where to find Lenovo power/energy management?
Yesterday, my new Y500 reminded me that I can extend my life of the battery by unloading it partially. Then I looked for the energy management program to do that and can't find it on the computer! I then downloaded from Lenovo and installed it, but still I can not find the program to load! I searched all the apps. In addition, the Windows power management system is active and seems to work very well.
Robert
I don't know if this will help, but when I clicked on the battery and more selected "Power Options" then click on 'change the power plan settings' and then I went into "advanced power settings". There is a tab it for Lenovo Energy Management and you must click on "activate Lenovo Energy Management." Then it pops up.
-
No power/energy management Lenovo after installing the driver?
My laptop is X 1 carbon, on Windows 8. I installed geku18ww, Lenovo Power Management Driver for Windows 8. But I can't launch the software to change the battery settings. What is the reason? Thank you!
Hi, yangxie
I'm not sure why this feature was removed, but I was able to find a thread here on the Lenovo Forums which should provide assistance. A user on the forums, wsko, was able to change some registry values to manually set some values to get a battery threshold that works for him and others.
Another possibility is to try to install the Lenovo Power Manager in a Windows 7 compatibility mode. Other users have done, as indicated by DAF in the thread above. You can find instructions for this method here on the Microsoft Support site.
It will be useful,
Adam
-
In the GPME, I want to filter settings that apply only to Internet Explorer 9.0.
In the list of filters requirements only IE3 by IE8 is available and IE9 is missing.
The only policysettings IE9 are available during the use not all filters.
I use Windows 7 Enterprise SP1 (Dutch) with RSAT for W7 SP1 and Windows Server 2008 R2 SP1 Standard (Dutch).
IE9 is installed on all clients and servers, including all updates.
On a server using GPME has the same effect.
Models using the or the central store makes no difference.
I use the admx and adml files right, but the filter list is not populated with IE9.
Hi r.vanderhorn,
I would suggest to repost your question among our professional audience of COMPUTING heregroup policy TechNet forums.
Thank you!
-
blue screen saying internal power error cannot access windows update or mse
my machine under vista keeps freezing and close with a blue screen saying internal power error also I can't access windows update or mse is a virus? pls help
Hi PhillipHarries,-You not recevie the error code with this error message? If Yes, indicate the same.-Are you using a 32-bit or a 64-bit machine?See this link for the same:Value of 0x000000A0 INTERNAL_POWER_ERROR bug control a. This bug check indicates that power policy manager has encountered an unrecoverable error.More information about this error is available at:Here are some links which may be useful for you to solve the problem: -
Curious... the power light flashing indicates also XP was put on Stand-By...
Here's the manual where you can read about the Stand By and flashing, how come off stand by and maybe get some ideas:
http://support.Dell.com/support/eDOCS/systems/dim9100/en/D86630LRs.PDF
We will get the video information in msinfo32 as well:
For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
Couple of things: 1) I ran anti-virus programs and found nothing. It is probably because I have Webroot essentials running on my computer that pretty much catches most of the problems. ((2) I found the clogged fan grille almost closed with dust... I have now cleaned and 3) when I try to save power settings, I get an error message that says "Power Policy Manager unable to set policy - indicates two revision levels are incompatible." I don't know if it's because I recently downloaded and installed the SP3 from Microsoft (so that I could download and install (upgrade to) Office 2010) which may be incompatible with Webroot? I say it's when I right click the icon of the Service Pack 3 and click Scan, my webroot scan lights. In any case, I've attached the information requested below.
I hope that it is something as simple to clean my gird so the machine overheating... causing the closure. My computer shuts down actually to the beautiful middle of my only uninstalling the software anti-malware you have suggested.
Name ATI Radeon X 300/X 550/X 1050 Series
ID of device PNP PCI\VEN_1002 & DEV_5B62 & SUBSYS_06021002 & REV_00\4 & 1A646D2D & 0 & 0008
Adapter Type RADEON X 600 (0x5B62), compatible ATI Technologies Inc.
Description card ATI Radeon X 300/X 550/X 1050 Series
Adapter RAM 256,00 MB (268.435.456 bytes)
Installed Drivers ati2dvag.dll
6.14.10.6925 driver version
File INF oem24.inf (section ati2mtag_RV380x)
Color plans 1
4294967296 colors Table entries
Resolution 1280 x 1024 75 Hz x
32 bits/Pixel
0xF0000000-0xF7FFFFFF memory address
0xFE9E0000-0xFE9EFFFF memory address
Port of e/s-0x0000DC00-0x0000DCFF
IRQ channel, IRQ 16
Port of e/s-0x000003B0-0x000003BB
Port of e/s-0x000003C0-0x000003DF
Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6925, 3.40 MB (3 565 056 bytes), 11/02/2010 01:38)
Name ATI Radeon X 300/X 550/X 1050 Series Secondary
ID of device PNP PCI\VEN_1002 & DEV_5B72 & SUBSYS_06031002 & REV_00\4 & 1A646D2D & 0 & 0108
Adapter Type RADEON X 600 secondary school (0x5B72), compatible ATI Technologies Inc.
Description card ATI Radeon X 300/X 550/X 1050 Series Secondary
Adapter RAM 256,00 MB (268.435.456 bytes)
Installed Drivers ati2dvag.dll
6.14.10.6925 driver version
File INF oem24.inf (section ati2mtag_RV380x)
Color of the aircraft not available
Color not available Table entries
No available resolution
Bits/Pixel is not available
0xFE9F0000-0xFE9FFFFF memory address
Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6925, 3.40 MB (3 565 056 bytes), 11/02/2010 01:38) -
My Windows 8 "your pc fell on problem, collecting information and restart."
Helloo everybody
I had a problem with my pc today though:
yesterday, I unplugged my PC power and changed the place of my PC and everything.
This morning when I pluged everything I pressed the power button on my PC, it boots up it shows me the logo of the screen and then "your Pc on a problem, collecting information and restart for you" I have installed 2 a 8 and the other 8.1 windows, none of them is ready to start
but before that I unplugged my PC, it worked very well.
I tried to do the automatic repair and it says 'auto repair Failled' I also tried to "restore my system" and still the same problem
I downloaded these girls to dump, please check the
I'm really grateful if someone can help me
idon't want to lose those 2 windows, and I don't want to format :(
Thank you!
dump girls:
https://SkyDrive.live.com/redir?RESID=54C1809ED8225CC1%21501
Salim98
The crash more recent was November 29 and was tied to a stake of fatal power which might have killed the HD
have you tried booting in safe mode? Tried to start the victory 8 dvd?
INTERNAL_POWER_ERROR (a0)
Power policy manager has encountered an unrecoverable error.
Arguments:
Arg1: 000000000000010, the disk subsystem has no properly read or write the part of hibernation
file.
Arg2: 000000000000000a
Arg3: fffffa8005a39340, POP_HIBER_CONTEXT
Arg4: ffffffffc0000185, NTSTATUS error code -
Your power plan information isn't available - and default Windows 7 missing power management
I recently installed Win 7 Home Premium 64 bit on my laptop HP Pavilion DM1-4027sa (ships with the 32-bit version, but I wanted to install more than 4 GB of memory where the change in 64-bit). Initially, all default power plans were presented and Windows Experience Index has worked. Then somewhere along the line of the installation of a large number of windows updates (including SP1) and install the latest HP Power Manager (the root of the problem, in my opinion), the default power disappeared and it stopped the test Windows Experience Index working (details below). I searched these forums and the internet more widely for a solution and have already tried the following:
1 uninstalled HP Power Manager (the first thing I did).2 run cmd as administrator and run the powercfg line - RESTOREDEFAULTSCHEMES. Run powercfg-LIST before and after just lists the GUID feeding "381b4222-f694-41f0-9685-ff5bb260df2e'.»» The fact that he has only this one is my reason to suspect HP Power Manager software deleted my system ('High Performance' etc.) windows default patterns 3. the winsat.log file shows that the system to be able to 'High Performance' missing (8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c) prevents performance Win of work index test:2352713 (3192) - winsat\logging.cpp:0815:-START 2011\12\10 10:47:32 -2352729 (3192) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 26dbc111-68f1-448e-9fea-5b602495fb912352729 (3192) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred2352744 (3192) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.2352791 (3192) - 4585: Watch dog system active2352791 (3192) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand2353758 (3192) - winsat\main.cpp:2490: > DWM running.2354320 (3192) - winsat\main.cpp:2497: > turn off DWM.2354351 (3192) - 2470: > EMD service will be restored to the exit.2354367 (3192) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode2354367 (3192) - 2793: > power policy saved.2354429 (3192) - winsat\syspowertools.cpp:1018: ERROR: cannot set the current power mode to '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c': more data is available.2354429 (3192) - winsat\main.cpp:2810: ERROR: cannot set high power state.2354491 (3192) - winsat\syspowertools.cpp:1015 >: 381b4222-f694-41f0-9685-ff5bb260df2e value of the power system active"2354491 (3192) - winsat\main.cpp:2855: > state restored power.2354507 (3192) - winsat\main.cpp:2870: > Successfully reenabled EMD.2354585 (3192) - winsat\watchdog.cpp:0311: Watch dog system shutdown2354585 (3192) - 4909: > exit value = 1.4. I ran the sfc/scannow as administrator in cmd.exe, and no problems were found.As well, the default settings have been removed (probably by HP Power Manager) is it possible to re - install the Win 7 default power management without making a long system repair? (I have installed since many things that literally took days. So I really hated to have to all downwind just to fix this power scheme)Thank you in advance to anyone who can answer this question.I think I have solved this problem. The information in the links below I created .pow files for all default windows using plans/plans (energy saving, high performance and balance) on an another Windows 7 laptop (a Lenovo N200 with a power management which had not been ruined by the program of management of power supply by the manufacturer). I then imported these power schema files into my HP laptop and, fingers crossed, everything works as it should again. I hope it will help someone else who has the same problem after installing the HP Power Manager (it is no doubt HP Power Manager that caused the problem in the first place).
Maybe you are looking for
-
I got a laptop Satellite A100-549. To get it working again, I need to do a complete reset to factory settings. Unfortunately there is no software on the laptop recovery and there is no recovery discs. How can I get a set of recovery discs?
-
Repeated downloads of KB2919355 KB3063843 and KB2990967
You need to stop these downloads that load over and over again.
-
Laptop of HP 2000: unknown device, HP cannot find laptop
I've searched for quite awhile without help. I have installed 8.1 and now I have driver problems and the HPSupportSolutionsFramework - 11.51.0048 does nothing.
-
Windows to this day does not work on my Windows 7.
Original title: windows update Windows to this day does not work on my windows 7, the new facility. its valid correctly.
-
How to change the background color of the autoCompleteField.
Hi all I used AutoCompleteField in my application. I need to change the background color of the AutoCompleteField. I used -autoCompleteField.getEditField (.setbackground) (BackgroundFactory.createSolidBackground (1644825)) but it fills the entire in