Hide a single parcel in chart

Similar Questions

• How can I update a single parcel in multi graphic of xy trace?

  Hi all

  I'm working on a 'before' HMI for a larger acquisition/analysis system, which includes monitoring the continuous performance of a turbine. The results of the measurements are stored arrays of contour lines, which represents the openings of turbine efficiency and guide of pallets. This analysis is all running in the background. In the GUI, performance data are loaded from file when the specific report' is requested and is plotted in a XY Chart. I would like to indicate the current operation of the machine using a pitch which is a single point. So a position of this point among the contour lines indicates the current performance of the turbine. This point is updated once per second, while performance data remain the same for considerable amounts of time between recalculations (days or weeks).

  Is it possible to update the value from a single source in a conspiracy of several XY graph without having to redraw all parcels?

  I tried to use the 'Active Plot' property, which does not work.

  My current solution is to keep all the input data to the execution of the while loop and replace a subset of table plot, but which of course requires the entire rewrite whenever the plot of operating point is updated.

  You can't redraw a single parcel. If you want to update a single parcel, you must keep all parcels in a shift that and replace the desired field data. However, your problem seems much simpler than that. To display a single point on a ground almost static, you have several options.

  1. You can use a cursor that is controlled by program (the style can be a point, do not allow to drag).
  2. You can use annotations.
  3. You can use the "plot images" feature which allows you to use the picture controls to draw anything on top a chart.

  None of these ideas need a refresh of the data.

  I think that the idea of cursor is probably the easiest and most appropriate. Just use a node of property with the following properties:

  • active cursor
  • cursor x position
  • cursor position y

• I can't hide legend column on a chart?

  OBIEE 11 g, I would like to hide (not exclude) a legend (or column) in a chart. This is because the graph has a link to another report and I need information to pass on filters in the details of the page when the user clicks on the chart. However, I do not want to show the data on the chart. Is this possible? Thank you.

  You can use the columns hidden in a graph. You can't have the hidden column in the chart itself, it must be defined as hidden in the criteria (the column-online hidden properties) tab.

• How to 'hide' a single stroke behind the other object?

  I'm struggling with something that shouldn't be this difficult!

  I'm planning a logo white T-Shirt only (to go on a dark green T-shirt)

  To simplify, let's say I have two ovals with no fill, just a white line.  A small oval overlapping (sur-haut of) the part of the edge of a larger (oval below).    I have

  Any advice on how to 'hide' the line which is "behind" the top object?

  As follows: http://i.imgur.com/ZghWTMa.jpg  

  Actually, I'm not completely sure yet.

  Response to Steve assumes silkscreen with a single opaque white ink. It will not work if the composite impression not opaque transfers or cut out the vinyl applied, or if you import the work of two-ellipse for combination of other works of art.

  Because you do not know:

  1. draw two circles with a stroke color and fill color (ex: feature black, white fill) on both.
  2. apply the weight of the desired race.
  3 object > path > describe stroke.
  4 pathfinder palette: merge.
  5 white pointer: select both within the regions and remove.
  6. you now have a single compound path; None of the objects that overlap and real 'holes' where you want the substrate to show through. Applies regardless of the fill color (white, etc.) that you need.

  But keep in mind what has already been said: white, unless it is defined as a spot color, does "not print." Think in terms of inks, not in terms of 'color '. In a program like Illustrator, 'white' normally means "no ink". And we must always know what printing method that you design.

  JET

• With a single value pie chart

  Hello Experts,
  
  I am new to the apex.
  I want to draw a pie with a single value.
  that one value should resemble a slice in the pie chart.
  I tried, but it shows that any graph as a value.
  
  So please help me in this regard.
  Its very urgent.
  Please, I beg you.

  Hello

  I don't know if I understand your question, you want to pie chart or line chart? If you draw two lines in a single chart, you add another series to the chart. Click on the graph and click on add another series, enter another sql for the series and you should be all set. Thank you.

  Kind regards
  Manish

• Two timed in a single parcel sine signals

  Hello

  I enclose my VI, and I need help to draw the waveform.

  Each symbol (0 or 1) have different frequencies. I would like to draw each signal one after another. (like a waveform of the FSK)

  I am trying to build my own FSK.

  So far, each signal is display one then the other.

  Thank you

  

  Hit Ratatouille,

  The display of graphics for one signal after another, click with the right button on the graphic on the front and replace it with a graph in the form of wave. I think that this action has resolved the problem you mentioned. The functional difference between a waveform graph and a waveform chart is the way are handled the x-axis. For the chart, the x-axis is in real time, while for the chart, the values of x are an entry. In your case, the generation of sinuses makes the sine waves, but each generation has the same values, X, so the best you could do would be to overlap.

  Hope this helps,

  Luke W

• How to hide a single tab to tabcontrol

  Hi, I want to hide a tab on a tabcontrol multi-onglet based on login. If the particular bit is set, see the 1st and 3rd and so on. I've just been through help files. I could not found.

  Raj.

  This can help:

• How to show/hide a single component of the form on valuechangeListner

  Hello
  
  I want to show/hide on move down according to the value of the selction of value in the other fall down. However, when I change the value lower down, the GET refreshed and the entire domain in the list drop-down and entered text is empty. Can you please help me with this?
  
  I want to show/hide the drop down to "Business Unit" based on the value selected for "Type of application" and the data for the remaining element must be populated.
  
  Here is the code

  <af:panelFormLayout id="pfl2">
  
                      <af:selectOneChoice label="Order Type" id="soc2" required="true"
                                          validator="#{lovManagedBean.orderTypeValidator}"
                                          binding="#{userAuthentication.orderType}">                    
                        <f:selectItems id="si2" value="#{lovManagedBean.orderTypeItems}"/>
                      </af:selectOneChoice>
                      <af:selectOneChoice label="Request Type" id="soc1" required="true"
                                          validator="#{lovManagedBean.requestTypeValidator}"
                                          binding="#{userAuthentication.requestType}"
                                          
                                          valueChangeListener="#{userAuthentication.requestTypeValueListener}"
                                          autoSubmit="true">
                        <f:selectItems id="si1" value="#{lovManagedBean.requestTypeItems}" />
                      </af:selectOneChoice>
                      <af:selectOneChoice label="Request Geo" id="soc3" required="true"
                                          validator="#{lovManagedBean.requestGeoValidator}"
                                          partialTriggers="soc1"
                                          binding="#{userAuthentication.requestGeo}">                    
                        <f:selectItems id="si3" value="#{lovManagedBean.requestGeoItems}" />
                      </af:selectOneChoice>
                      <af:selectOneChoice label="Business Unit" id="soc4" required="false"
                                          validator="#{lovManagedBean.businessUnitFlagValidator}"
                                          binding="#{userAuthentication.businessUnitFlag}"
                                          visible="#{userAuthentication.requestType ne 'Credit Memo'}" partialTriggers=":soc1">                    
                        <f:selectItems id="si4" value="#{lovManagedBean.businessUnitFlagItems}" />
                      </af:selectOneChoice>
                    </af:panelFormLayout>   

  Hello

  cut,,,Tags and it should work
  but I recommend that you rewrite your page as regular xml (.jspx) to avoid the 'strange' behaviours ;)

  example:

  Kind regards
  Brano

  Published by: Branislav Nemec on June 2, 2011 20:33

• 2D, legend, chart error bar XY, Multi draw help? Please modify the VI

  Please READ THE ENTIRE POST and HELP!

  Please help with this VI and make an instructive example for me and other novices like me who come through this typical example.

  A typical problem of tracing data is the following: on the SAME plot (y axis = Amplitude axis x = time), draw curves Amp1, Amp2, Amp3,... from sample1, sample2, Sample3,...

  In addition, it is a mistake1, Error2, Error3,... associated with Amp1, Amp2, Amp3,..., which must also be traced. In order to distinguish between these curves, we can use different

  colors and show a legend that reads Amp1 (i.e. black), Amp2 (say red) and Amp3 (green for example). Then, the plot becomes complete and transmitting data very conveniently.

  The attached VI made an attempt to trace Amp1 and Amp2 helps chart XY and 2D plot of error bar (to display error bars). There is a slight problem. The legend does not show what it is assumed

  to show. Can someone solve this? If I draw two curves, the caption should show Amp1 Amp2, that if I drew three curves, the caption should show Amp1 Amp2, Amp3 and so on.

  I don't want to see the default plot 0, draw 1 or whatever. Also, it would be nice to dynamically control the symbol, the color, the style of curve etc as we continue adding more curves in the plot.

  Once this problem is solved, I know that I can easily extend to draw more accurate curves two dynamically. I could use for loops with shift registers, etc. to draw any number of curves on a single parcel.

  Believe me, I searched for other positions and could not find a simple example like the one I posted here. I found a lot of examples have confused me more that helped me.

  I believe that if this problem is solved in a simple way, many will find this informative example. So by helping me, you help a lot of other people as well!

  Thank you in advance. Please see the attached files (VI and an example of data file I created only)

  If you like graphic multiple curves (Y1, Y2, Y3, etc) with their respective error bars (Err1, Err2, Err3, etc.) on the same plot

  Use the error Bar Plot (aka 2D bar error) and want the legend to display (Curve1, Curve2 Curve3, etc. or all what you want to call it),.

  Please visit the following link:

  http://forums.NI.com/T5/LabVIEW/A-simple-challenge-error-bar-plot/TD-p/1986755

  For the use of XY graph, please check out the link in one of the posts above.

  Thanks to everyone who has contributed to this.

• Automatically labelling legend of trace using XY charts?

  I want to draw:

  Ampere hour

  1 2

  2 4

  3 9

  How can I get legend of automatically tell Amp, instead of the 0 plot? I went to the node-> caption property and I don't see any option

  who should read the header "column" and label the caption accordingly.

  In my example, the table X (time) and Y table (Amp) are introduced into the beam that then feeds the graph XY of entry. Table X (1,2,3) and Y table (2,4,9)

  obviously don't wear no information on their respective column names (time, Amp). So the legend must read this information separately, but I don't know

  How to feed information to the legend of the plot.

  Simply a node property to "plot.name". You only have a single parcel, so the following is sufficient (of course you must replace the string constant diagram with everything you read from the column header in the file)

  

  (If you have several courses, you would in a loop, affecting the active plot of the iteration terminal, first of all, then by writing the name)

  Since it is an xy graph, I would actually hide the legend and simply label the axes according to their header. This can be done in a similar way with nodes of property. See if you can understand.

  (Of course if the labels never change, manually enter them once and they will be saved with the VI. Without code.)

• How can I delete a curve of a chart? Thank you

  
  

  What you see is a REALLY BORING of the chart behavior. I've seen this before, but I don't know if this has been reported as a bug, but otherwise, I'd call it a. What happens is that once you resize the legend, the table "remembers" the names of the plot. It doesn't matter if you made only feed him two parcels. Here's how to reproduce:

  1. With the code you provided, place a chart on the VI. Do not change the properties of the graph.
  2. Connect the card to the output of the merge signals.
  3. Run the VI.
  4. Open the properties of the legend of the plot, and you should see 10 plots.
  5. Close the graph properties. Don't change anything.
  6. Reconnect the chart at the end of the VI of signals select.
  7. Run the VI.
  8. Open the properties of the legend of the plot, and you should see 2 plots. Expected behavior.
  9. Close the graph properties. Don't change anything.
  10. On the front panel, resize the legend of the plot, so that it shows, for example, field 5.
  11. Open the properties of the legend of the plot. You should see 6 plots.
  12. Close the graph properties. Don't change anything.
  13. Run the VI.
  14. Open the properties of the legend of the plot. You can always see 6 plots.
  15. Close the graph properties. Don't change anything.
  16. Resize the plot legend back to only show that a single parcel.
  17. Open the properties of the legend of the plot. You can always see 6 plots.
  18. Close the graph properties. Don't change anything.
  19. Run the VI.
  20. Open the properties of the legend of the plot. You can always see 6 plots.

  I think that it is an incorrect behavior. You can change the number of parcels shown in the legend by programming if you want to do. Simply changing the size of the legend.

• multi parcels

  Hello

  I'm programming a PID temperature controller and must draw two curves on the same graph. The first is the desired temperature - a straight line - and the other is the fluctuating temperature depending on the time. Missing VI configures the serial port, set the PID values and get the current temerautre. They all have been tested and work fine. Any suggestions?

  You have some major problems with the path you draw. First, you use a XY chart so that you only get a single parcel. If you want to trace two separate, then you should use a regular graph or chart. Second, the way in which you create the table with the GetTemp VI is completely false. At each iteration of the while loop, you create a new item of a table and replace. You throw the old data. The simplest thing for you to do is to use a chart. Wire the scalar of the ReadTemp and a constant to a bunle function and the release of what the graph.

  

• Is there a way to hide iTunes buy in bulk?

  The question is simple, as the title suggests... y at - it a way to hide iTunes buy in bulk? In other words more... I want to hide all single purchase I've ever made through the iTunes store... is there a way?

  Thanks in advance!

  See you soon,.

  BG

  Nope.

  By the end of 2012 Mac minis, macOS?  Watch, 38 mm silver AL, Watch OS 2.2.1. iPad 2 Air & iPhone 6 + iOS?  Apple Airport Express

• Show hide graph

  I have attached a VI in which I used an event structure to hide and show a XY Chart. I tried to do a similar thing with a chart, but couldn't. I want to use a graphic because I read that the graphics are better than the graphics. In real time, I read the data of an acquisition of data, but since I read a data loop to demand, which is a data by iteration of a certain time point, the generator of random numbers within a while loop reflects my acquition of data in place. The other thing is that must also show the data acquired when the graph is "hidden". Can someone help me please.

  Thank you

  No way to convert the vi to 8.5 (.. memory manager error!-I guess I should update my version of LV...).

  Here is a picture of diagram. Nothing is hidden in other frameworks.

  

• two objects with a single mask image

  Hello guys

  can someone guide me how to tow mask objects (a box and other image) present in the same canvas with the third image which are also in the same canvas.i may hide a single object at a time, but need of solution both.any mask?

  Thanks in advance

  Vineet sharma

  Try puuting the box and the image in a single container (canvas, Hbox, etc) and mask the container.