Hide all networks except preconfigured wireless those approved in windows xp

Similar Questions

• Asked to "monitor all network traffic" Fusion 7.1-8.1 Windows plain vanilla VM - I didn't ask for it, how to disable it?

  Hi all

  I created a computer virtual Windows 8.1 on October 1, 2013 with the current, at that time version of VMWare Fusion (not Pro, who has the tab network preferences and the check box associated to whether to display it's fast) on my Mac.

  Since then, I upgraded the version of OS X to Yosemite and the version of VMWare Fusion to 7.1.1.

  At one time, months or years, I started having the prompt below:

  

  A virtual machine tries to monitor all network traffic, which requires administrator access. Type your password for this purpose.

  I don't want to allow this, I never asked for this virtual machine to use the "Promiscuous" mode, I don't want to do, and I can't find anyway to turn this off!

  I always leave the command prompt and everything works fine.  Discussions only I can find this in the forums are all related to people using ESX to vSphere, neither of which I have no knowledge where all used.

  I had an another VM Windows 8.1 on another Mac during the same time, which has crossed all the same updates, and it never shows this prompt.

  Please help make this stupid, quickly go and stop this virtual machine to try to use the "Promiscuous" mode!

  Thank you - Harold

  You have the Hyper-V role installed in the virtual machine?

• Computer connects to the Internet on all networks, except one

  A few days ago my computer stopped at random to connect to the internet via an Ethernet cable in my apartment.  It works very well, continuously for more than a year.  I first thought the network was down, but to verify ports three separate wall in our apartment (including the one in question) computer of my roommate and his computer connected perfectly.

  My computer can still connect to other networks (different buildings) both via radio and connected via Ethernet, if this isn't a hardware problem.  Currently, we have a wireless router configuration in our apartment that my computer can connect to.  For some reason when I am connected to the network via an Ethernet cable, the computer cannot access the internet.
  When connected, the State jumps back between "Internet access" and "no Internet access.  I tried to ping www.google.com and several other IPs known without success.  Works fine when I go wireless.
  I tried the following, without success:
  Reinstalled drivers for network cards
  Reset the network settings
  Reset Windows sockets
  Enabled IPv4 and IPv6
  Add favorite DNS servers (google and a few others)
  Restart
  System restore
  If anyone has any ideas, I can provide more information, if it helps...
  Thank you

  The problem was somewhat resolved.  When the connection to the Local network has been filled with the wireless network connection, the Internet took over.  I unplugged the router wireless and internet still works, so I'll consider it a success so far.

• Pavilion dv6-7135nr: loss of network connectivity and wireless after upgrade to Windows 10 cable

  After the upgrade to Windows 10, I lose network connectivity after a restart of the computer.

  The operating system fails to load drivers Broadcom 4313 n. The driver date is May 8 202. The reason code is 31 on failure to load the drivers.

  I returned to Windows 7 and migrated to Windows 10 several times with the same result. I tried to upgrade on the Broadcom drivers, but Windows says they are up-to-date.

  I also see that the Realtek PCIe GBE Family Controller is having the same problem.

  I think it's a driver problem, but cannot find the correct set of drivers.

  Any help would be very useful. I have just re-upgrade to Windows 10 and have network connectivity.

  Hi @karbacdb,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-7135nr Entertainment Notebook and problems with connectivity Wireless Windows 10. You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Here is a tool of Broadcom for Windows 10 drivers that could help.

  Windows 10 drivers are available through Windows Update. Please be aware that HP does not Windows 10 drivers will be available from Windows Update.

  Please let me know how it goes.

  Thank you.

• How to hide the password of the wireless network?

  Original title: Wi Fi security

  How to hide the password of the wireless network, once some bodies go wireless and password properties.  (Properties-> see the password on the properties of the wireless network)...

  By not allowing access to an account with administrator privileges. If they try to do it with a Standard user account, then they need to know the Admin password. If they don't know that so they cannot see the characters.

• How to hide all instances of subform (via a click event of the button) except the last instance.

  When my form is rendered, it can contain multiple 'case' of a subform full page.  So basically, I have a subform labeled "Info" that spans a full page. Depending on how the form is used when a new instance is added to the document it essentially new creates an entire page.

  What I'm trying to hide all instances of subform ("Info"), except the LAST instance that is always on the last page.

  Theoretically, by hiding all previous subform instances (for example, 1-4) and keep only the last instance, it will reduce the number of pages 5-to-1.

  Hope it makes sense.

  SO I guess I need a way to get the number of instances of complete subform, then hide all instances, but the last instance (via a button click).

  Thanks in advance for your help.

  I belive I've thought about it.

• hide all the clips and reveal only those you need

  Hello

  Is there a way to hide all unwanted movieclips and reveal only those you need?

  From my understanding, if I don't want a particular movieclip on the stage, I'll use

  Scene1.visible = false;

  but it gets very complicated when I have different scenes appears at the same time, so I need to

  Scene1.visible = false;

  jungleScene.viisble = false;

  zooScene.visible = false;

  gardenScene.visible = true;

  Y at - it something like a scenes hideall and reveal only those that I need?

  Yes:

  function hideAllF(parent_mc:MovieClip):void {}

  for (var i: int = 0; i<>

  parent_mc.getChildAt (i) .visible = false;

  }

  }

• Dialogue boxes not hide all fields, not just those where the value is passed to true

  I hope someone can help me do what I want to happen, to occur if certain boxes are checked in the dialog box

  for now I see on the impression that the checkbox activates the value from false to true, but the OK button is also non-masquage console all my fields, not just those where he transformed the true value. What I'm missing here

  Create a dialog box for the staff to indicate how many of the account owners are in the branch so that the names of show in the signature section
  var Signors =
  {

  result: "Cancel."
  DoDialog: function() {return app.execDialog (this);};
  bChk2:false,
  bChk3:false,
  bChk4:false,
  bChk5:false,
  initialize: function (dialog)
  {
  var dlgInit =
  {
  "Chk2": this.bChk2.
  'Chk3': this.bChk3,
  'Chk4': this.bChk4,
  };
  Dialog.Load (dlgInit);
  },
  commit: function (dialog)
  {
  var oRslt = dialog.store ();
  this.bChk2 = oRslt ["Chk2"];
  this.bChk3 = oRslt ["Chk3"];
  this.bChk4 = oRslt ["Chk4"];
  },
  Description:
  {
  name: "Signors."
  elements:
  [
  {
  type: "display."
  elements:
  [
  {
  type: "display."
  char_height: 10,.
  elements:
  [
  {
  type: 'static_text. "
  item_id: "stat."
  name: "who is there to sign,:
  char_width: 15,.
  alignment: "align_fill",.
  Police: 'dialogue ',.
  },
  {
  type: "display."
  char_width: 8.
  char_height: 8.
  align_children: "align_top."
  elements:
  [
  {
  type: "display."
  char_width: 8.
  char_height: 8.
  elements:
  [
  {
  type: 'check_box. "
  item_id: "Chk2."
  name: "first to file."
  },
  {
  type: 'check_box. "
  item_id: "Chk3."
  name: "Team 1"
  },
  {
  type: 'check_box. "
  item_id: "Chk4."
  name: 'team 2 ',.
  },
  ]
  },
  
  ]
  },
  ]
  },
  {
  type: "ok_cancel."
  },
  ]
  },
  ]
  }
  };

  made the change of value when checked - allows you to check
  Signors.bChk2 = false;
  Signors.bChk3 = false;
  Signors.bChk4 = false;
  If ("ok" == Signors.DoDialog ())
  {
  If (Signors.bChk2 = true)
  getField("Signor1").hidden = false;
  getField("Staff1").hidden = false;
  getField("Date1").hidden = false;
  getField("Date2").hidden = false;

  If (Signors.bChk3 = true)
  getField("Signor2").hidden = false;
  getField("Staff2").hidden = false;
  getField("Date3").hidden = false;
  getField("Date4").hidden = false;

  If (Signors.bChk4 = true)
  getField("Signor3").hidden = false;
  getField("Staff3").hidden = false;
  getField("Date5").hidden = false;
  getField("Date6").hidden = false;

  Console.println ("Chk2:" + Signors.bChk2);
  Console.println ("Chk3:" + Signors.bChk3);
  Console.println ("Chk4:" + Signors.bChk4);
  Console.println ("Chk5:" + Signors.bChk5);
  console.println if shows bChk... is true or false
  }
  Console.println ("Chk2:" + Signors.bChk2);
  Console.println ("Chk3:" + Signors.bChk3);
  Console.println ("Chk4:" + Signors.bChk4);
  Console.println ("Chk5:" + Signors.bChk5);
  }

  Yes, confirmed values have changed, now show fields based on staff

  principal applicant has been selected

  
  doWhatIWant: {function (results)}
  If (results [Signors.bChk2] = true)
  getField("Signor1").hidden = false;
  getField("Staff1").hidden = false;
  getField("Date1").hidden = false;
  getField("Date2").hidden = false;

  1 associate has been checked
  If (results [Signors.bChk3] = true)
  getField("Signor2").hidden = false;
  getField("Staff2").hidden = false;
  getField("Date3").hidden = false;
  getField("Date4").hidden = false;

  Associate 2 has been selected
  If (Signors.bChk4 = true)
  getField("Signor3").hidden = false;

  If (Signors.bChk4 = true)
  . Hidden ("surete3") = false;

  If (Signors.bChk4 = true)
  . Hidden ('date.5") = false;

  If (Signors.bChk4 = true)
  . Hidden ('Date6") = false;

  I had to just add a hug to bChk3 database and it worked perfectly. Thank you very much!

• Mystery of the interference sawtooth with all networks

  Airport Extreme is powered over ethernet AT & T 2Wire modem/router.

  I have 2 nest webcams set up and find that they would sometimes display warnings of "weak wifi signal.

  So I got the Explorer Wi Fi app to try to see what was going on and optimize my network.

  I was able to find an optimal route for the AE 2.4 ghz network, but I always get warnings 'weak wifi signal' nest occasionally.

  I found that when I opened Internet Explorer and let it run for a bit, the display will sometimes appear a "Sawtooth" pattern where all networks in my area (except I used) would PASS for 10 seconds, then come back for 10 seconds, then down, then come back.

  

  It goes sometimes for 3-4 minutes, sometimes for 30 minutes or more.

  Any time of day is not noticeable type.

  Happens on all channels and it seems to knock out 5GZ and networks. (at least, he knocks out them to the Wi Fi Explorer...)

  Contact support to the Wi Fi Explorer and sent screenshots, thinking it might be a common problem.

  Response was that it was never seen before, perhaps a HD external wonky somewhere?

  I have unplugged and off to any external hard drive.  No change.

  Unused, no wireless microwave phones.

  At first I thought it might be a microwave oven in use, cycling on/off heating/defrosting/cooking etc, but it happens when I know that my neighbors aren't home.

  Clues as to what might be knocking out these signals of network in this type of model?

  If your wifi can not reach the nest with reliability you may move the access point or create a different network / extend the network with an another AP, see if the displacement of the AP help questions.

  I have to wonder if the wifi card is in "scan mode" which requires to change the frequency, I think that could produce a model like that because the network is only on a part of the spectrum. You have all the other apps that can cause the wifi card scan or is the wifi actively seeking a card networks?

  I don't know what is the reliability of this app is or what evidence it does.

  Each color is a different network? What is the Brown line? What is your network?

  Apple have wifi diagnostics to troubleshoot wifi...

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

  Or get a second opinion via another application...

  https://iStumbler.NET/

  Obviously using several wifi applications may cause problems then run only one at a time.

• IdeaPad Y560 wifi detects all networks but don't connect at all!

  I have an ideapad y560, recently I installed a fresh win 7 ultimate 64-bit. Everything is perfect, except the wifi, it is not connect to any network, even though it detects all the and asks for the key, but ends up saying "windows could not connect to .

  Let me explain in words:

  1. wireless driver works correctly

  2 - Wifi detects all networks and demand the key to connect

  3 but it says "Windows could not connect to.

  4. connect to ad hoc networks without problem

  5 - LAN connection works perfectly

  6. each driver is updated (network, BIOS, Bluetooth...)

  7 - Windows is being updated

  8. all the existing solutions in each forum are put to the test

  Any suggestions?

  Hello

  He had a preinstalled operating system that has win 7 home x 64, the computer was full of viruses so I need her erase and install a new one.

  The good news is I spent all night on this subject, and this morning I fixed the problem after 72 hours. That was very interesting!

  I went on the last restore point and it fixed the problem, I do not know how, because the wifi was not connect from the first moment, I installed the win 7 ultimate, which was average, before the creation of this restore point!

  Thanks if buddy!

• I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

  Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:

  • What is the error code indicated under Technical Details on the error page?

  in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:

  • What information about the issuer of the certificate contain?

  Please take these two pieces of information. Thank you!

• With the last update, I can't minimize a window by double-clicking. I want to cut a window in the dock, not hide all open windows.

  I'm a Mac, set user updated to 30.0. Now when I double click to minimize the window in the dock instead of minimize the particular window open, I'm in I get a new tab. I don't find a way to simply reduce the specific window, only to hide all Firefox. I don't want to hide it, I want to only show the dock window is available not not open on the desktop at this time.

  Suggestions did not exactly help (thanks for trying so fast however) except that to try, I looked in the Menu Bar "Window" drop-down menu and he was there: minimize-> order Mr. he does exactly what I want, reducing the window I'm toward the dock, where he sits with the icon reminding me that this is. Thanks for your help.

• userChrome.CSS - remove all toolbars except front/rear, refresh and home

  I need to configure firefox in almost-kiosk mode. I want to disable all toolbars except for the "back" button, next button, refresh and home buttons.

  I did find something that allows you to hide the bookmarks toolbar. And if I keep at the entrance of #urlbar, front and rear buttons appear, but do not work (they're grayed out)?

  That's what I have so far:

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* set default namespace to XUL */
  #searchbar {
  	display: none;
  }
  #main-menubar  {
  	display: none;
  }
  #urlbar  {
    display: none;
  }

  You can hide the Bookmarks Toolbar window and customize with these identifiers:

  #PersonalToolbar { display:none!important; }
  #CustomizeToolbarWindow { display:none!important; }
  

  ID #personal - brand - pages is for the bookmarks toolbar item that can be placed on a toolbar through the window customize.

  Try to drag the URL bar and search and other items that you hide in the toolbar palette.
  
  It seems in the history of the button B/F run after a reboot.

  It is usually best to use the DOM Inspector to get the ID or class of items of toolbar names.

  • https://developer.Mozilla.org/en/DOM_Inspector
  • https://developer.Mozilla.org/en/Introduction_to_DOM_Inspector
  • DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

• Equium P200-1ed - card Atheros WLan does not pick up all networks

  OK about amonth and a half there is weupgraded of Windows Vista to Windows 7, 32-bit Home Premium.
  Everything worked without problem (yes I know with access)

  Then suddenly at 01:00 today, Internet went on the Toshiba laptop and we can't put it back on. I tried the new drivers and nothing, try the keys FN and nothing turned also out of the card wireless forward and turn it back on. The laptop is the map reckonising, becausewhen I uninstll the driver picks it up. So I'm so confused as to what it can be.

  Girlfriend wason Facebook at the time. I scanned Virus, Anti-spyware, scanned and cleaned C islet still nothing. So I checked online to find loads have had the same problem, but no one seems to post the answer. Could someone please help.

  Laptop is Toshiba Equium p200-1ed, Intel P Dual Core CPU T2310 1.46GHz 2 GB of Ram. Running Windows 7.
  The problem is with the wireless adapter - Atheros AR5007EG Wireless Network Adapter

  As I say, works fine, then suddenly do not pick up all networks. My other computer laptop of them is recovering fine. Running the computer on the Ethernet cable. Just not the wireless. He does not know the wireless card is there, it is like its just abandoned, but if a lot of people have problems with Atheros adapters in windows 7. Can someone please.

  David

  Hey dude!
  Thanks for sharing this with us! Could be useful for other people who have discovered the same question

  Welcome them

• Equium - cannot find all networks to connect

  Not very computer savvy so will try to explain the problem as best I can.

  I can connect to my internet connection via ethernet cable, but cannot connect wireless (although I have before).

  The wireless function is enabled and the orange light comes on. When I open connectivity doctor and go on the radar screen, my internet connection appears (along with a few others)
  When I hover over the connection icon at the bottom of the screen, it says that "wireless connections are available", but when I click it it establishes that "windows cannot find any network" then understand that there must be an easy way to solve this problem, it can not find all networks to log, mine or one of my neighbors!

  Hi paulymart,

  Which model of laptop, you have exactly and that you've updated the driver WLAN?