Hide no port. for outside users

Similar Questions

• How to hide a prompt for a user to obiee perticular 11.1.1.5.0

  Hello
  I work in obiee 11.1.1.5.0.I have a prompt that I need to hide it from a particular user. Can someone help me please in this?
  
  In my environment, I joined obiee oam. So all of my users come from OID. I need to hide the prompt for few users OID.
  
  
  Untouchables in waiting for a response.
  Farsatha.p.p faye

  Hello

  Refer to the below link.
  http://obiee10grevisited.blogspot.com/2012/03/using-guided-navigation-for-access-of.html

  Everything you need to create two article for both sets of users. A section with the guests to show users and another section with the guests changed to hide from the user.

  Hope this helped / replied

  Concerning
  Young

• Hide the headings for specific users/groups

  Hello
  
  Is this possible with WEBhelp, hide/Exclude subjects for specific user groups / users?
  
  Currently, we use html/chm help. There is a project for our main software. I have another project for an add-on that is integrated in the table of contents of the main project using the merged help function. We only install help for this module when the customer has purchased this module. So the customers who do not have this module do not have help to make it.
  
  It is possible something similar with WEBhelp (Pro)? I ask because we go to WEBhelp (Pro). In this case, there is no help by the customer file, but one for all the world. Is there a way to display only the additional items to customers who use this module?
  
  * The only way I can think is to integrate all this into a single project and publish twice (one with and one without the themes of the additional module) using the tags of the construction. Or is there a way to let the RoboEngine/RoboServer merger it on the fly, but based on the criterion that the customer has the module?
  * This additional help project can be added to the main help as a teaser for other customers also use this module (others cannot buy unless you are a franchisor of a group of specific hotel for which we have developed the module)
  
  Thank you

  Hi John-Pierre. RoboServer this is impossible on the fly. Tags of the generation are the way to go. Simply create a new tag, apply it on the subjects you want no franchises user to see, then apply the tag to your SSL to exclude it from the output. Viola, you have your username not franchisees to help. Simply remove this label from construction of the SSL for users of franchises so that they get everything. You can also create two identical WehHelp Pro SSL - 1 vote against and no label construction and the other with a construction tag to avoid you to have to remember to add/remove.

  How your application will know files that help write? Is this a separate executable? I know that it is possible for the INSTALLATION. EXE to check the license before installing the modules, but I never went to the bottom of this line.

  BTW, build tags can be used on all types of output.

• C1765nfw - Lost CD - how to make paper Port for my user?

  Hello

  I'll be back this printer a user, but without the CD. Now I need to install the Port of paper for a new user, but the download is not provided by Dell. How can I get a new CD?

  Thank you very much

  concerning

  Hi Steffen,

  In order to clarify that I don't know of the license agreement between Dell and Nunace, we don't keep no records of individual licenses assigned to each client, at least not something that sits in an immediate database for access. The precise agreement that we can only offer you (the purchaser) a copy of the software which is done via the CD provided. After that, we are not able to offer new, and did not have replacement CD to offer for any printer model.

  Kind regards
  Joseph E

  #iworkfordell

• Missing categories for a user

  Hi all

  I have a user who has no categories listed in LiveCycle Workspace inside "begin the process".  A normal user would see something like this:

  

  The user in question has only favorite and nothing else.  She is the only user I've seen who has this problem because I don't think that you can hide the categories for specific users or groups.  This user is able to connect to the workspace, it can check the tracking, but is referenced on "start the process".

  I'm running out of ideas to try, no matter who are going through this and found a solution?

  It is actually a bug in LiveCycle. You will need to contact support to get the fix for this. The question is when a user has a process in their favourite category, then the categories will not, display as soon as you remove the favorite category process and then log out and log back into worksapce everything should work correctly again.

• Get errors for the user input data filter no KB 911895 HID

  OT: iI have windows xp S/P 3 installed also apple i pad I get errors for the user input data filter no KB 911895 HID
  What should I do to get rid of this popup that wizzard windows keeps giving me?

  Hi Graybeard,

  What is the exact error message you get?

  HID Non-User Input data filter is an optional update. I suggest you try the steps from the following link:

  The screen saver does not start after the installation of a wireless pointing device
  http://support.Microsoft.com/kb/913405

  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Hello

  The normal thing to do is to create a similar additional responsibility and using Exclusions to 'hide' the features you want.

  Then assign it to restricted users.

  Kind regards

  Bashar

• The Vmtools icon hide taskbar for all users

  Hello

  I was wondering how to remove the icon from the taskbar to Vmtools for all users.  When I connect I have disable however if another user logs on to the icon returns to this user.  It seems to be an individual user setting and not a global setting... There should be the option to put it on a global scale... (perhaps a thought for the future revision)

  Thank you

  This key should help:

  Windows Registry Editor Version 5.00

  \VMware of HKEY_LOCAL_MACHINE\SOFTWARE\VMware tools, Inc.

  "ShowTray" = DWORD: 00000000

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• How to stream data in series for a user specified using LabVIEW?

  Hi all

  I need to send data continuously using serial communication to the microcontroller for a user specified time... Any suggestions please?

  And here's one that I like and is easy to modify.  You can copy the snippet directly in your block diagram:

  http://forums.NI.com/T5/LabVIEW/reading-time-interval-of-serial-port/m-p/1529140#M568806

  In the case where I did not provide this link, it has some interesting things...

  http://forums.NI.com/T5/LabVIEW/change-baud-rate/m-p/276265#M146432

• How to enable access to a port for my mobile phone application to access. When I try to connect I get error socket is closed.

  I have purchaced an app for my phone android mobile facenate which can access my computer remotely.  When this trys remote app to connect to my computer, I receive an error message that says the socket is closed.  What I need to know, is how to open a port for this app to access my computer.  Also I got an error that I do not have a public IPV4address that may have something to do with it.  I have win 7 64 bit. I would be so happy if someone could help me; I'm really ready to see this app works.

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

• Windows Mail error 0x800CCC92: Operation of Pop is not allowed for this user

  Split of: ' "windows mail error code: ox800CCC0E, error code 10060".

  Account: 'mail.bigpond', server: 'mail.bigpond.com', Protocol: POP3, server response: '-ERR pop operation is not allowed for this user.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  It's what keeps appearing on my Windows Mail when I go in there. BigPond say they have problems with Windows Mail and try to fix it.  Any ideas please?

  Thanks LyndaBeresford

  If they have problems, then it is not that you can do about it until they solve these problems.

  You can access your e-mail via webmail: https://signon.bigpond.com/login?site=chw&goto=http%3A%2F%2Fmessaging.bigpond.com%3A80%2F%3Fref%3DNet-Head-Webmail

  Steve

• Windows Messaging keeps asking for a user name and password. What should I do?

  Windows Mail keeps asking for a user name and password.  I know that the username and password are good because I can access mail via the web.  I have two e-mail accounts.  Saturday, I installed 23 updates of windows.  Now today, I can't get into windows mail.  Why?

  Error message:

  Account: 'first name', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Account: 'username', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Hello

  I am happy that it works.

  It is perhaps that this has nothing to do with your system, but a 'problem' in the e-mail server of the provider.

• Failsafe wishes after "Person in this position is not available" for new user

  I have a customer running 4.0.3 with Unified Messaging Unit and they have recently added a new user who has problems. Responses of the unit after several rings when you call and give the generic "the person at bla extension is busy, please leave a message, but just as he should give the beep to record the message he gives greeting integrated security. The event viewer shows the following error for this user:

  Event type: error

  Event source: CiscoUnity_PHGreeting

  Event category: error

  Event ID: 153

  Date: 16/08/2004

  Time: 17:54:21

  User: n/a

  Computer: UNIT

  Description:

  The mailbox of the unit for the recipient with alias - for messages calling on the outside is not available. Possible reason could be that the mailbox has been deleted or if it is an Exchange 2 K implementation, the RUS is not late or is not provided in law. Technical details - the field of the SMTP address in the gloabal Subscriber discovers for the

  Subscriber is empty or NULL. 0x80004005

  (Note that the misspellings and bad grammar come from the error, is not my typing :)) The SA unit shows an alias associated with the appropriate Exchange 2003 server. AD users and computers indicates that there is an e-mail account and the e-mail address is listed as SMTP tab e-mail addresses. I am not able to make changes now, but when I can I'll delete the tab list email address and add it again. If that does not do it, I'll remove the user from the unit and then AD and Exchange and re - add.

  I hope it will work, but I was wondering if anyone could help with why its giving this error or if you have other troubleshooting steps I should sue. Any help is greatly appreciated.

  Thank you

  Jim

  In SQL, open your table of Subscriber and make sure that the SMTP address of the Subscriber problem field is filled.

  H. M.

• Need for an IDS/IPS system for LAN users

  Hello

  I need to have an IDS/IPS for my users the in my network. We have 3xcisco 6509 to access with 4 level switch VLAN and am looking for a system to detect activities such as ports, IP scan analysis and... local network by desktop.

  Please advise me.

  Thank you

  Mike

  Hello

  VLAN span is good, no problems at all but I wouldn't recommend 100% to go to IPS mode instead of ID. Safer and more restrictive, way

  Concerning