WRT610N Firmware version update Question

Similar Questions

• WRT54G Firmware Version: update v7.00.7 Beta?

  Hello

  I have a router wireless EMEA WRT54G v7 with Firmware Version: v7.00.7 Beta. I can't find an update of the firmware on the site.

  Can you please help?

  Thank you

  Firmware update is available. Version 7.00.8 is available on the EMEA website. Click here!

  It is enough to click on "Downloads" and select the correct hardware version.

• WRT54G (version 2) Firmware Version Question

  Hello

  Beautiful room here. I'm glad that this facility exists.

  I have the router WRT54G version 2. Finally, I upgraded the version of firmware years before Cisco Linksys bought.

  A recent announcement by the people of Black Hat (treaties in this article of TechSpot) about their intention to publish a validation tool to exploit a vulnerability of DNS rebinding on a great many routers SOHO forced me to check for the latest update of firmware for my router.

  The interesting thing is that my router's Web interface lists the current version of the firmware as 4.30.12, but the latest version of the downloadable firmware that I see listed on the support site is 4.21.1. I'm not very surprised by this apparent anomaly. If I remember correctly, that firmware version 4.30.12 download is a beta that was supposed to fix a problem connecting WiFi to a certain type. If this version of the firmware was still considered a beta at the time of the acquisition of Linksys by Cisco - or a 'stable' later firmware version incorporating the same or better fixes for the issues addressed by 4.30.12 that had been produced at that time-so maybe 4.30.12 was ruled out.

  If you read the article of TechSpot and the associated table of preliminary vulnerability, test reports, you'll see that router WRT54G version 2 is not specifically listed. Version 3 of the router is listed as vulnerable, and version 5 of the router is not.

  So, my questions are:

  Everyone here is aware of information indicating whether or not the problem of DNS Rebinding vulnerability affects the WRT54G version 2 with the last registered (4.21.1) router firmware version?

  If so, does anyone know if yes or no Cisco plans to release an update for this old router?

  If the router is vulnerable and will not be solved with a firmware update I'll probably have myself a new LInksys router which is not listed as vulnerable. (Believe me, I'm not leaving this thread to bash Linksys. This router ran like a train of 24 hours a day for years without a single hiccup that was not directly attributable to the problems of the ISP. For the price, it's one of the best purchases of equipment I've ever done calculation. And I have done this since the beginning of the 80s when I was using a CP/M system and an Apple / / e.)

  If the 4.21.1 version firmware for WRT54G version 2 is not affected, I wonder if anyone knows if yes or no 'downgrading' of 4.30.12 to 4.21.1 is likely to lead to a failure of the router. (I'll probably try it anyway. If it brick the router I'll just go ahead and get a new one.)

  BTW, I use this router with the ease of remote administration and UPnP off and strong admin password that is changed each week. (When I always used wireless I used WPA2 AES with strong password, but I am all wired now with the systems running Debian testing).

  Forgive me for talking to myself. I decided to just go ahead and "downgrade" of the 4.30.12 firmware 4.21.1 version - just because I prefer to use a version of firmware known and supported for this material. The downgrade has gone well, so no worries about this.

  I'll look for news on whether or not this version of the firmware on this particular router is vulnerable to the flaw in DNS rebinding and acts accordingly.

  Sorry for the noise.

• PS6100 with firmware version 7.0.5 + Oracle Linux 5.10 + multipathd question

  I try to use the multipath regular linux (device-map-multipath) with my PS6100 and it doesn't quite work. It gives me "readsector0 Auditor reports path is down," "pdu (op 0 x 50000370 itt 0x1) rejected.» Code 0 x 4 reason"errors and my iSCSI connections are reset every few seconds. My OS is Oracle Linux 5.10 (fully updated) and my PS6100 is running with the latest firmware version 7.0.5.

  The latest kit from Dell STRUCK for Linux, 1.3.0-2, works fine on this machine, but the reason why I'm putting multipathd is to compare the performance between the two solution. If we look at the other system we have that run the ordinary multipathd, paths of Dell could give us performance. We doubt it, but we want to do the tests and a comparison of its performance stats.

  We have another server which has almost the same configuration (same OS connected to an another PS6100) and multipathd works well on this one. And one of the difference between this system and no work is that the PS6100 is running on firmware 5.2.5 instead of 7.0.5. I'd be willing to downgrade firmware (this unit is not yet in production, and I don't mind losing the data on it) but I'm not find anything on the internet that show how other that of the "call from Dell and it'll do it for you. If the only thing you need to do is a special command in the CLI then why there is no documentation on this subject?

  So I wonder if anyone here runs a firmware equallogic 7.0.5 with the multipathd of linux and a RedHat 5 of operating system (Oracle Linux, Redhat, CentOS, etc.)?

  Hello

  It is documented in the release notes for the firmware 7.0.x.  There is a bug in Multipathd, which is exposed with 7.0.x. firmware.   Replace readsector0 TUR or ARM and restart multipathd.  Protocol errors will stop and Linux MPIO works perfectly.

  Kind regards

• Of the EA6300 firmware auto update during installation, no random to WAN WAN gigabit drops

  Really, I just want the previous firmware, it will not return to the previous firmware, even if she has detected a version more recent and downloaded/installed. Possible problem during this update I want to redo, but not possibility because no prior firmware exists.

  Leads me to believe there is something in the previous firmware you guys want that we know or have once again.

  Serious security loophole eventually.

  The ultimate question is random disconnects Arris 822 g at the EA6300,.

  But I noticed after installing updated the link to the Modem Gigabit droped to 100Mbit negligible for speeds we have but always notworthy and anxiety.

  Have tried everything I can think of outside custom through 3rd party firmware. or change your firmware which is not necessary, but I did to belkins for their security flaws which I do class action about what I discovered with their firmware on several other class of devices.

  This is implemented for the parental units and EA is supposed to be EASY for them. I have them walked through the process just for your device does not works as advertised.

  Don't blame the Arris it worked and maintaines on other EA devices connection. I don't appreciate finger that help professionals tend to blame everything other than your device, then try not to do.

  It is a question of Linksys EA6300.

  Bought another ea6300.
  The object of dumping the firmware out of it.
  Corrupt firmware of EA6300 question of dumping.
  Installed prerequisite firmware dumped on EA6300 issue.
  Updated to the current firmware manually on EA6300 question
  success.

  Certainly wished I could have returned back.
  Or was the prior firmware available to try above.

  Now, I EA6300 to spare for NOT boning.
  More details can be found in IRC guest single channel.

• How do I disenroll from beta version update channel?

  I agreed to be a 'beta version update channel' person long ago when I was rarely using Firefox.

  Now, two things have changed:
  I am limited to 5G per month (upward and download).
  I switch to Firefox as my default browser.

  Someone told me that I have to make sure that I disenroll from all the apps that relay to the developers use information. Because it's a way I can "escape" MB out of my monthly allowance.

  Please understand that I am an amateur computer user, and this may seem like a ridiculous question.

  The main thing is I want to just the normal version of Firefox, version beta tester.

  Hi urbfarm.

  You should be able to install the latest official version of Firefox, and it will take you away from the circuit of the beta. You can download that here:

  http://www.Mozilla.org/en-us/Firefox/new/

  Hope that helps!

• How do I know what version (update / output level) version 6 has been applied to my system?

  Question
  How do I know what version (update / output level) version 6 has been applied to my system? I applied several different publication levels to version 6 of FF, but all about feature tells me is Version 6.0. No version! This seems to be a change in the updates in the way which are managed. What is a distortion because of the speed in which you push updates and what's new?
  contact me if you need something more

  e-mail address removed

  For those who are in need of a photo/screenshot, see attachment below. Right click on the image below, choose "Open in New Tab", click on the image to open in the new tab to zoom in and enlarge the image.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Access Point WRT1900AC & Firmware version: 1.1.10.167514, it cannot be accessed the config page.

  Hello!

  I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
  Firmware version: 1.1.10.167514
  Release date: June 30, 2015

  My WRT1900AC is configured as a wireless gateway.

  https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

  Also, I have disabled firewall and uPnP.
  A tutorial here:

  http://www.Linksys.com/us/support-article?articleNum=140371

  Everything works except that without access to the router config page.

  The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

  (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

  Yesterday, I spoke with live chat. I received recommendations:
  "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

  WRT1900AC will be his disabled DHCP. »

  I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
  Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

  fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
  Otherwise everything works well and stably.

  inspire wrote:

  Hi chadster766!

  Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
  If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

  IP address of the router (LAN):

  Connectivity-online-online details router LAN => Edit

  * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

  Bridge mode:
  Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode

• How do I know the hardware version WRT54G to only the firmware version and date

  Hi - on a Linksys WRT54G, serial numbers and the version number have
  been worn except in the case of the unit, so I don't know what version it is. He has since been released in it's 'safe place' to which I don't have physical access (and yet they want me to admin it). Don't think that I even get cable connect, wireless only. Gee. In any case... of the configuration screens I see:

  The current version of the firmware is 1.00.6 January 20, 2006.
  I could, I guess that to get the MAC address

  The default login and password are what is active.

  Can you tell what version of the material is, so that I can download the
  good firmware flash update?
  Thank you

  The best way is to check the hardware, but as you mentioned, it is not an option. I suggest that you check each firmware release notes, check the previous firmware versions and dates on each version of the output material. However, it may be tedious.

• RAID Controller degraded by the Firmware version

  Hi all

  My security system is sending me alert because my RAID controllers being day. RAID controllers are fine, but the State is deteriorating because of the "latest Firmware Version available" which means I can't properly control if something really bad happens.

  Is it possible to disable the alert or lower the minimum version expected? I just can't reboot all my servers just for an update of the RAID firmware.

  My security system expects a status: Ok

  Thank you very much in advance!

  Greg

  Below the output omreport:

  omreport storage controller $
  Controller PERC H700 integrated (Embedded)

  Controllers of
  ID                                            : 0
  Status: No reviews
  Name: PERC H700 integrated
  Location ID: shipped
  State: degraded
  Firmware version: 12.10.1 - 0001
  Latest Version of the Firmware available: 12.10.4 - 0001
  Driver version: 00.00.06.14 - kh1
  The minimum required driver version: not Applicable
  The Storport driver version: not Applicable
  Minimum required: Version of the Storport driver: not Applicable
  Number of connectors: 2
  Regeneration rate: 30%
  BGI Rate                                      : 30%
  Consistency check rate: 30%
  Rebuild rate: 30%
  Alarm status: not applicable
  Cluster mode: not Applicable
  SCSI initiator ID: not Applicable
  Cache memory size: 512 MB
  Patrol read mode: manual
  Patrol read status: stopped
  Patrol read rate: 30%
  Read the iterations of patrol: 2
  Give up control of consistency error: disabled
  Enable reversible hot spare and replace the: enabled
  Load Balancing: not Applicable
  Auto Member Replace on Predictive Failure: disabled
  Redundant path view: not Applicable
  Able CacheCade: Non Applicable
  Persistent backup: disabled
  Encryption Capable: Yes
  Currently key encryption: No.
  Encryption mode: no
  Preserved cache: No.
  Spin down drives unconfigured: disabled
  Turn down hot spares: disabled
  Centrifuge the configured drives: not Applicable
  Automatic disk Power Saving (idle C): not Applicable

  Thanks again!

  gcharot

  Is it possible to update the firmware without system reboot? I am running CentOS 5 and 6

  No, you can update the firmware without a reboot, but the update will be based in the controller cache until a reset is performed. So yes, you can perform the update without reboot, but it will not take effect until you perform a reboot.

  Thank you

• VSphere 4.1 and Dell MD3000i iSCSI raid firmware version

  We had a problem to upgrade to one of our VMservers last week to version 4.1, seems that the version of firmware for the Dell San iSCSI raid is not compatible, and our Server 4.1 is not able to see the SAN.  Anyone encountered this?  Does anyone know if Dell has yet released a version update of the firmware?

  Thanks, Tandrist

  GEN 1 vs. Gen 2 is not a material difference, it's the firmware (vs 7.x 6.x).  At any given time a few years back, they decided that the firmware that they created was too buggy to fix and they scrapped it and started over.  All units purchased in the last two years must have been shipped with firmware Gen 2 and if you have an older one, it is easily (but slowly) being upgraded.

  My system is running 07.35.22.61 and it works fine.

  EDIT: Have you checked that the name of the iSCSI initiator has not changed during the upgrade?  Don't forget, the Bay Dell determines what LUN to show you the way in which the customer is identified.

  Jason Litka

  http://www.jasonlitka.com

• How can I download a version update of safari

  How can I download a version update of Safari?

  Since Safari is part of Mac OS X, you download a new version of Mac OS X.

• Calculator chart 50g. How can I find my firmware version? Thank you, johnnaben

  How can I find my firmware version?

  Thank you

  johnnaben

  I thank very much - the two methods have worked

  johnnaben

• I changed my beta version updated channel by mistake and it upgraded to a beta version, and now there is no option to restore.

  I changed my beta version updated channel by mistake and it upgraded to a beta version, and now there is no option to restore.

  You can only change the update channel if you uninstall Firefox and remove the Firefox program folder or install a beta version or release that copies a file new channel - prefs.js. Update Firefox never changes the update channel. Only a full installation will do it.

• R7000 - change of firmware version

  I already had firmware version: V1.0.6.28_1.1.83 installed, but now find the newest website is Firmware Version V1.0.4.30_1.1.67. Why the most recent version is down? I would like to re - download version V1.0.6.28_1.1.83

  Thank you