Hide the tunnel-group in client anyconnect

Similar Questions

• name of the tunnel-group

  Hello

  In the configuration below I put in place a tunnel-group name that is the same as the counterpart of VPN tunnel. Is that what you have to do, or could call you the tunnel-group what you want?

  part of pre authentication ISAKMP policy 1

  ISAKMP policy 1 3des encryption

  ISAKMP policy 1 sha hash

  Group of ISAKMP policy 1 2

  ISAKMP policy 1 life 43200

  ISAKMP allows outside

  Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

  l2l_list to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.1.0 255.255.255.0

  tunnel-group 10.10.10.1 type ipsec-l2l

  tunnel-group 10.10.10.1 ipsec-attributes

  pre-shared key xxx

  card crypto abcmap 1 match address l2l_list

  card crypto abcmap 1 set counterpart 10.10.10.1

  card crypto abcmap 1 set of transformation-FirstSet

  abcmap interface card crypto outside

  Robert,

  The tunnekl group should be the IP address of the remote end - because it is used as ID. The only time where ever you need to use a specific name - is if you are certificate authentication.

  HTH.

• ASA by the issue of authentication of the tunnel-group

  Is it possible to do so by the tunnel-group authentication on ASA 8.4.x?

  Here are the scenarios:

  (1) tunnel-group_A performs authentication using the digital certificate (PKI)

  (2) tunnel-group_B performs the authentication using AAA (RSA SecurID token)

  (3) tunnel-group_C performs authentication for LOCAL assistance (AAA user defined locally)

  Tunnel-group_A, B, and C are all using the same physical interface and outside the interface.

  I tested it, but it doesn't work the way I expected.  BTW, I have already disabled "interface authentication ssl certificate outside of port 443"

  Here are the results of the tests:

  If the tunnel group_A is configured with the certificate, then tunnel_group_B connection will fail, but connection tunnel-group_C works very well.

  It seems that tunnel-group_B trying to authenticate with certificate too, if she does not.  BTW, it seems to authenticate to the LOCAL help will still work.

  I understand that you can configure tunnel_group_A to "both" certificate and AAA, but that's not what I want.

  Anyone seen this before?  Is there a way to bypass?

  Thank you

  Joe,

  Yes, I would then use Group-url. And I would create and profile of XML with the specific URL in the list of servers.

  List of servers

  Let me know.

• Hide the drop group Anyconnect logon window

  Hello community.

  Someone told me that it is possible to hide the drop Anyconnect group, so that only the user name field and the password is visible on the Anyconnect connection windows. See printscreen

  

  How do we have at least one group. We don't need this menu drop-down.

  Thanks in advance, patrick

  In ASDM, under Configuration--> VPN for remote access--> network (Client)--> connection profiles AnyConnect VPN you will see "Configuring the Login Page. Uncheck the box 'allow the user to select the connection profile... ". »

  So, you can remove the 'Alias' of the connection profile.

  Kind regards

  Kevin

  * Do not forget to note the useful messages but also to mark it as 'responded' once your problem is solved. This will help others find your solution more quickly.

• using the group name and password group in client anyconnect

  Hello. Is it possible to use the group name/password of the legacy in customer cisco anyconnect vpn client? I checked the AnyConnect Administrator's Guide ' VPN XML Reference"and found nothing on this subject.

  It's true.

  AnyConnect Secure Mobility Client (VPN Module) can be used to connect to both types of VPN remote access:

  1. full SSL VPN tunnel

  2 IKEv2 VPN IPsec.

  The legacy VPN client is used only with the old IKEv1 IPsec VPN and you cannot use this type of VPN client AnyConnect.

• Select the Tunnel-Group based on OS devices

  Hello

  having an ASA5512x is possible to have anyconnect-dial-in-PC-users asking their IDs AND also a one-time-password

  Whereas smartphone users only need to provide their username and a password without the need to manually select the profile?

  I've set up two groups of tunnel:

  (1) requires an LDAP server for authentication

  (2) is in contact with a RADIUS server running the software One Time Password.

  Is it possible to have the asa affect smartphone users (based on their OS) that it automatically uses the first profile (which has limited access to the resources of the intranet) and Anyconnect-PC-users pinned to the second category of tunnel? Dynamic access policies seem to be able to differentiate only ' in' a tunnel-group.

  Thank you very much!

  Kind regards

  David

  I never tried this way, but if it does not (as I suspect) there is a solution:

  1. Point your customers on the two different groups of tunnel with the help of tunnel-group-URL.
  2. Later in the DAP impose that the customer does not use the wrong tunnel-group.

• Configuration of the Cisco ACS 5.3 AnyConnect VPN and management of a Cisco ASA 5500.

  We have configured a Cisco ASA 5505 as a VPN endpoint for one of our user groups.  It works, but it works too well.

  We have a group called XXX we need to have access to the Cisco AnyConnect Client.  We have selected this group of our Active Directory and added to our ACS configuration.  We've also added a group called YYY that will manage the ASA. However, this group has no need to access the VPN.

  We added XXX movies for the elements of the policy of access to the network-> authorization profiles.  We also have a profile of YYY.

  She continues to knock on our default Service rule that says allow all.

  We have also created a default network access rule. for this.

  I am at a loss.  I'm sure I missed a checkbox or something.

  Any help would be really appreciated.

  Dwane

  We use Protocol Management GANYMEDE ASA and Ray for VPN access?

  For administration, you must change the device by default admin access strategy and create a permission policy. Even by the way, you can change the network access by default for vpn access and create a respective policy for that too.

  On the SAA, you must configure Ganymede and Ray both as a server group.

  For the administration, you can set Ganymede as an external authentication under orders aaa Server

  AAA-server protocol Ganymede GANYMEDE +.

  Console HTTP authentication AAA GANYMEDE

  Console Telnet AAA authentication RADIUS LOCAL

  authentication AAA ssh console LOCAL GANYMEDE

  Console to enable AAA authentication RADIUS LOCAL

  For VPN, you must set the authentication radius under the tunnel-group.

  I hope this helps.

  Kind regards

  Jousset

  The rate of useful messages-

• Site to Site VPN. pick up DfltGrpPolicy instead of Tunnel-Group

  Hello

  Our ASA was set by a consultant some time ago to allow connectivity SSLVPN RSA backend. I am now trying to get a Site to Site VPN working but seem to get into a lot of difficulties. I get a load of the l2l VPN-related debugging messages which I believe is set up correctly. Here's what I think is of interest

  "January 24, 2009 12:13:01: % ASA-6-113009: AAA recovered in group policy by default (DfltGrpPolicy) to the user = x.x.x.x".

  The user specifies the IP address of the Cisco router remote that we try to get the VPN configuration.

  I have to admit that I haven't done a lot with the side things SSLVPN so this part of the config is out of my depth, that's why I post here.

  If anyone can help it would be really appreciated.

  Here are the relevant details (I can post more if there isn't enough). My question is, how do I get the l2l using the tunnel-group and not the default group policy?

  Thanks in advance for any help.

  dynamic-access-policy-registration

  DfltAccessPolicy

  WebVPN

  list of URLS no

  SVC request no svc default

  RADIUS protocol AAA-server VPNAUTH

  AAA-server VPNAUTH *. *. *

  interval before new attempt-5

  timeout 3

  key *.

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  LOCAL AAA authentication serial console

  the ssh LOCAL console AAA authentication

  AAA authentication LOCAL telnet console

  LOCAL AAA authorization command

  attributes of Group Policy DfltGrpPolicy

  value of DNS server! !. !. !

  VPN-idle-timeout no

  VPN-tunnel-Protocol webvpn

  enable IP-comp

  enable IPSec-udp

  field default value mondomaine.fr

  the address value vpnpool pools

  WebVPN

  enable http proxy

  SVC Dungeon - install any

  SVC keepalive 60

  SVC generate a new method ssl key

  SVC request no svc default

  disable ActiveX-relays

  disable file entry

  exploration of the disable files

  disable the input URL

  tunnel-group DefaultRAGroup webvpn-attributes

  message of rejection-RADIUS-

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared-key *.

  tunnel-group DefaultRAGroup ppp-attributes

  PAP Authentication

  ms-chap-v2 authentication

  attributes global-tunnel-group DefaultWEBVPNGroup

  address vpnpool pool

  authentication-server-group VPNAUTH

  tunnel-group DefaultWEBVPNGroup webvpn-attributes

  message of rejection-RADIUS-

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  pre-shared-key *.

  Wayne

  Do "sh run all tunnel-group" you should see the strategy of group associated with it.

  for example:

  tunnel-group 1.1.1.1 type ipsec-l2l

  tunnel-group 1.1.1.1 General attributes

  no accounting server group

  Group Policy - by default-DfltGrpPolicy

  tunnel-group 1.1.1.1 ipsec-attributes

  pre-shared-key *.

  by the peer-id-validate req

  no chain

  no point of trust

  ISAKMP retry threshold 10 keepalive 2

  Let me know if it helps.

  See you soon,.

  Gilbert

• How to hide the Submit button in the TEB?

  Using Cap 9, with the last update.

  I added a 'text area' group to a slide. After validation of the entry, I would like to hide the whole group. I call it a group because you get the field and the Send button.

  I can't hide the field because I can give it a name and then refer to it in my Advanced actions. But I can't see the button submit as well, so I can't hide it.

  Did I miss something? Is there a work around known for allowing me to hide the Send button and the text input field?

  No, it's an object built in, which means that you can not solve, because there is no correct ID. In addition, you can add States either. I tried that as well. Embedded objects are very limited.

  I have however a workaround. It depends a bit on the used theme, but the Send button is often a text button. This is my workflow

  1. Because you cannot change the style of a button text, I replaced it with a transparent button.
  2. I did this totally invisible to the user transparent button: fill opacity = 0%, line width = 0 and remove the button caption (label).
  3. I created a text caption or a shape with 'Submit' and dragged under the TEB in the timeline panel. It is not necessary for the output SWF, but it's for HTML output. This text container has an ID and will be visible because the TEB button is completely transparent.
  4. When the user clicks on the button submit, I trigger a successful action that will be:
     1. Hide the text container (Submit)
     2. Mask of the ETB

  If you do this several times in a project, you can create a shared action.

• What is the difference when the IP pool is placed under the group policy and SSL tunnel-group

  Hi usually ip address pool is placed under the group policy in Anyconnect VPN, but I noticed the ip address pool is also placed under the Anyconnect VPN tunnel-group in some ASA. What is the difference between both of them? Thank you

  Both are used for the same purpose, but that under group policy always takes preference.

  Kind regards

  Sandra

  If you find the answer useful, please mark it as correct while others can benefit from the discussion.

• How to match tunnel-group with auth ASA 8.2 and IPSec VPN Client using digital certificates with Microsoft CA

  Hello

  I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080930f21.shtml

  Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:

  % ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
  % ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroup

  So, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?

  Please help me!

  Kind regards

  Fernando Aguirre

  You can use the group certificate mapping feature to map to a specific group.

  This is the configuration for your reference guide:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978

  And here is the command for "map of crypto ca certificate": reference

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685

  Hope that helps.

• AnyConnect nam - how to hide the vpn components?

  Hello

  for a project we require the use of begging her to nam (eap chaining), but the customer does not want the vpn module is visible.

  the nam module is conditioned by the main anyconnect secure mobility client.

  is their a setting/option to hide the end user vpn dialog boxes?

  Greetings

  Install the anyconnect following basic component:

  msiexec/package anyconnect-win-ver-pre-deploy-k9.msi /norestart PRE_DEPLOY_DISABLE_VPN = 1 /lvx/passive *.

  And the VPN feature will be disabled, and then install NAM

  Starting from here:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html

• Profile VPN (tunnel group) under the same IP pool

  Hello

  I have on my clients VPN from Cisco ASA 5510 works perfectly. The thing is that now I want to create a new profile or a tunnel in order to create the new cause of ACL I want to restrict only to certain hosts. But I don't know if I can do it under the same IP pool. If the answer is yes how could bind the new tunnel group to the correct ACL.

  This is my config:

  vpnxxxx list of allowed ip extended access all 192.168.125.0 255.255.255.0

  IP local pool ippool 192.168.125.10 - 192.168.125.254

  NAT (outside) 1 192.168.125.0 255.255.255.0

  NAT (inside) 0-list of access vpnxxxx

  RADIUS Protocol RADIUS AAA server

  RADIUS protocol AAA-server partnerauth

  AAA-server partnerauth (inside) host xxxx.xxxx.xxxx.xxxx

  key xxxx

  Crypto-map dynamic dynmap1 20 set transform-set Myset1

  lifespan 20 set security-association crypto dynamic-map dynmap1 seconds 28800

  Crypto-map dynamic dynmap1 20 kilobytes of life together - the association of safety 4608000

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  internal group RA - VPN strategy

  attributes of RA-VPN-group policy

  Server DNS 172.16.1.100 value

  VPN-idle-timeout 30

  Protocol-tunnel-VPN IPSec l2tp ipsec webvpn

  Split-tunnel-policy tunnelspecified

  type tunnel-group RA - VPN remote access

  General-attributes of RA - VPN Tunnel-group

  ippool address pool

  authentication-server-group (outside partnerauth)

  Group Policy - by default-RA-VPN

  tunnel-group RA - VPN ipsec-attributes

  pre-shared-key *.

  Thank you

  The command is "vpn-filter" in the Group Policy section.

  Define a group policy for each group of tunnel and select it with 'by default-group-policy' in the section of the tunnel.

• AnyConnect tunnel-group automatic assignment without selecting any group-tunnel-group-list alias and user-group strategy.

  Objective is that the anyconnect user must select group-alias, so that when a user enters his username and password he must go to his political group and tunnel-group specific. as I removed this command in webvpn 'no tunnel-group-list don't enable '. This I can not connect (user does not authenticate).

  1 - my question is why his past does not?

  Solution:

  If I keep only a single tunnel-group by default and make several group policies and assign to each user with his specific group policy that it works. in user attribute means I have only question following the commands it works, but if I put "group-lock value test-tunnel" that it did not identify.

  Please explain why.

  WebVPN

  allow outside

  limit the cache-fs 50

  SVC disk0:/anyconnect-win-3.0.10055-k9.pkg 1 image

  enable SVC

  internal strategy of group test-gp

  attributes of the strategy of group test-gp

  VPN-tunnel-Protocol svc webvpn

  the address value test-pool pools

  username, password test test

  username test attributes

  VPN-tunnel-Protocol svc

  group-lock value test-tunnel

  Strategy Group-VPN-test-gp

  tunnel-group test-tunnel type remote access

  attributes global-tunnel-group test-tunnel

  Group Policy - by default-test-gp

  tunnel-group test-tunnel webvpn-attributes

  allow group-url https://192.168.168.2/test

  Yes, you have the right solution. You only need to create 1 group of tunnel and multiple group policy. Under the attribute of the user, you re then group policy of vpn that you want the user assigned too.

  You can also authenticate users against AD and configure ldap attribute map to map the user to a specific group policy automatically.

  Here is an example of configuration if you happen to have the AD and will authenticate against AD:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808d1a7c.shtml

  Hope that helps.

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.