hiding and showing captions with one button of evil

Similar Questions

• I am a new user. The trial version ch & LR have been donloaded 2 fair days and he was attuned to the monthly plan. However, when open the LR, there all the same show PS with one day left and trial version with 29 days. Please please advise and would l

  I am a new user. The trial version ch & LR were uploaded 2 days ago and just joined the monthly plan. However, when open the LR, there all the same show PS with one day left and trial version with 29 days. Please please Advisor and would like to know if other apps like bridge etc. are included in the plan. Thank you very much.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• help in hiding and showing the series in a line chart

  Hello world
  
  I have a line chart with 8 sets of data and I would have checkboxes to show and hide each series, if the graph is not too busy.
  
  How can I do this?
  
  Thank you
  Ryan

  Hello Ryan,

  If you use the library AnyChart which is provided by default in the APEX of the following links may help:

  [url http://www.anychart.com/products/anychart/docs/users-guide/livesamples/js-series/index.html] Adding, deleting, changing, hiding and showing Series - AnyChart JavaScript interactivity

  {: identifier of the thread = 2201947}

  I hope that helps!
  Kind regards
  Kiran

• Can I subscribe to Acrobat Pro DC and load it on my desktop and laptop computers with one subscription?

  Can I subscribe to Acrobat Pro DC and load it on my desktop and laptop computers with one subscription?

  one single-user subscription lets you install your programs cc on an unlimited number of computers.

  the only limitation is that you can only sign-in (and so start your adobe programs), at most, two computers at a time.  But adobe's sign and so easy is not important if you have an internet connection.

• If I buy the deal of photography can I download Lightroom and Photoshop on my desktop and laptop computers with one license?

  If I buy the deal of photography can I download Lightroom and Photoshop on my desktop and laptop computers with one license?

  Yes.

  single user to Adobe (including subscription cc licenses) license allows installation on an unlimited number of computers, but allow activation/sign-in on computer up to two at any time.

• CreateInsert and see the popup with one button?

  Hello
  
  jdev 11.1.1.0.1 is used on an xp sp3 computer.
  
  in a jspx, I have a table surround with a collection of panels
  on this Panel, an imagelink binding action 'CreateInsert.execute '.
  Then I have to click another button to open a popup form to edit the new line.
  
  user wants to create and show the population with a single button
  
  1 click imagelink must do:
  -createinsert
  -display the pop-up form
  
  I try clientlistener and showpopupbehavior, but only the first action (craeteinsert) is performed.
  I think that the updating of the page, then the showpopup action is forgotten...
  
  Thanks for help
  
  Published by: bradici on October 21, 2009 14:47

  Open the context menu programmatically. delete showpopupbehaviour.

          FacesContext context = FacesContext.getCurrentInstance();
          String popupId = clientId;
          StringBuilder script = new StringBuilder();
          script.append("var popup = AdfPage.PAGE.findComponent('").append(p1).append("'); ").
              append("if (!popup.isPopupVisible()) { ").
              append("var hints = {}; ").
              append("hints[AdfRichPopup.HINT_ALIGN_ID] = '").append(ot2).append("'; ").
              append("hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_END; ").
              append("popup.show(hints);}");
          ExtendedRenderKitService erks =
              Service.getService(context.getRenderKit(),
                                 ExtendedRenderKitService.class);
          erks.addScript(context, script.toString());
  

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• Folio quality of police during a State issue and then work with a button.

  I created an object in Indesign CS6 State, the second State is made up of a kind and once published to the Ipad, I noticed that the quality of the type has lost its smooth edges, previews of type very well until I work with it and try to make it work with a button, then it seems to lose its quality... Please could someone advise on why this could happen and a way around it.

  Hello

  For slideshows, select vector format in the palette of Folio overlays.

  Button is always rasterized as DPS. Try to make macarons like a bottomless and outline rectangle and put it on your button image (which remain just normal object with no interactivity).

• the blur on the police and the image when I show up with a button

  Hello I have a MSS with image and text, it looks great, but when I put in place a button for the pint to the MSO it becomes blury, the police and the image of the DSO. What can I do with it?

  no idea why this is happening?

  Thank you

  Unfortunately, you can not vector buttons Articles PDF as you can do with scrolling and slideshows. One solution is to have the image of the dead behind an invisible buttons button. If you want an effect! There are some other workarounds. See DPS tips > advanced overlays > sharp buttons.

  http://ContentViewer.Adobe.com/s/DPS%20Tips/7f80a0ffed3a4ff08734bc905aac4a29/Advanced_Over lays/12_button_crisp.html

• Why are what the buttons 'Clear' and 'Junk' repleased with the button 'archive' (only for one of the accounts)?

  Hello

  I must have changed a parameter, so that the 'Clear' and 'Junk' buttons above the mail pane disappeared, and a button 'Archive' appeared instead. It is true that for my mail via Gmail (IMAP), but when I opened an e-mail from my account (POP), I still see the button 'Clear' and 'Junk '.

  How can I fix?

  Thanks in advance
  Ayse

  Try this:

  Select an e-mail who don't watch all the correct buttons in the section above the message header information itself.

  Right-click on the empty area just above 'Other Actions', you should get a window saying 'customize '.
  Click on "Customize."
  opens in a new window.
  You can drag items on the header area, but I suggest that you click on the 'Restore Default Set' button, then click on the "Done" button.

• Showing results with one decimal two. Force the decimal.

  Hello

  Im a simple computing of writing device.

  You enter a digit, press one of the two buttons to multiply by a number, and then the result is displayed. The result is copied hide the result from the button you press on and visa versa.

  I'm having a problem to display the result with a decimal point two constant.

  I'm using strings and so do not know how to do this.

  Here is my code:

  import flash.events.MouseEvent;

  restrict entry to only numbers textfield

  txtInput.Restrict = "0-9";

  restrict the input textfield only a two-digit

  txtinput.maxChars = 6;

  event listeners

  btnW.addEventListener (MouseEvent.CLICK, WHandler);

  btnC.addEventListener (MouseEvent.CLICK, CHandler);

  btnW.addEventListener (MouseEvent.CLICK, hideC);

  btnC.addEventListener (MouseEvent.CLICK, hideW);

  functions

  function WHandler (e:MouseEvent): void

  {

  calculation of white

  var answerW:Number = Number (txtinput.text) * Number (0.90);

  txtWResult.text = answerW.toString ();

  }

  function of CHandler (e:MouseEvent): void

  {

  calculation of the color

  var answerC:Number = Number (txtinput.text) * Number (0.99).

  txtCResult.text = answerC.toString ();

  }

  function hideC (e:MouseEvent): void

  {

  Hide the result color

  txtCResult.visible = false;

  txtWResult.visible = true;

  }

  function hideW (e:MouseEvent): void

  {

  Hide the white result

  txtWResult.visible = false;

  txtCResult.visible = true;

  }

  After having had a look online I found these two resources:

  http://helpx.Adobe.com/Flash/KB/rounding-specific-decimal-places-Flash.html

  and

  http://StackOverflow.com/questions/11469321/decimals-to-one-decimal-place-in-AS3

  But I'm confused when combining these techniques with ropes.

  Any help would be greatly appreciated,

  Thanks in advance

  Mr B

  Use the toFixed() class number instead of the toString() method.  The result is a string that contains the number of decimal places you specify.

  var answerW:Number = Number (txtinput.text) * Number (0.90);

  txtWResult.text = answerW.toFixed (2);

  var answerC:Number = Number (txtinput.text) * Number (0.99).

  txtCResult.text = answerC.toFixed (2);

• 3 clicks and slide forward with Pause button in the timeline

  I found that if there is more than 3 boxes to click on a slide, the slide advances even with a transparent page button as an attempt to pause the slide advance.  Is there a reason that this happens and what kind of workarounds are suggested.

  I got the boxes to click as a pause until the user clicks on and without, it does make a difference.

  Thank you in advance!

  Sunshine

  Hello

  This sounds like there is a fundamental misunderstanding of objects and timeline.

  Buttons and boxes click stops normally slide they are on up to that the user performs an action that causes the playhead to resume playback. Consider the image of the timeline below:

  (You may need to click to enlarge)

  

  Note that the slide is timed for six seconds. The click box is timed for three seconds and will pause at the end as indicated by the pause icon. ( || ).

  Notice that the button stop to 1.5 seconds. So if you click on the button and the Pause released, assuming that the action of the one "continue" button, the slide would break again at the second three score because that's where the click box is a break.

  So lets assume there are three click boxes and a button. Each click box is staged to pause the slide at different times.

  

  In the image above, click box 1 will pause for a second. If the user clicks and the continuous blade to play, he will then break again during the second two mark as Click Box 2 stop there. And the third click box stops at the mark three seconds. But if you look carefully, then don't touch. This means that if you click on the third click box, the break is released and the button is always visible, but it is not pause the slide as it was before.

  If your installation, you probably need to stage the point break from the button a little further on the timeline.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• I'm a noob and have problems with several buttons on the pages of menu bar

  Hi all

  I'm building a site of basic database for my local community, and everything is fine until I try to add more script for the command buttons on the pages in the menu. The menu has 7 buttons that work, then on each of these pages are more than 6 buttons. The first page works fine but when I add the code to the following page to control its buttons access of undefined prop. error and continues to play through any chronology. It's the im code using control buttons on the pages in the menu. If someone could help that would be great.

  Nothing particularly wrong with the code you show it, it is more likely a matter of trying to affect a bad code.  If you can view the actual error message you get can narrow the problem... before that if you go in your publish the Flash settings section and select the option to enable debugging, the error message will have a bit more info in there.

  If you can describe this scenario where you have other buttons on other pages as well as how these pages differ from each other, which can be useful as well.  What are all the labels image linked to... the main timeline?  Is - this code on the main timeline or in the pages?

• under vista and cannot detect cam sex. Webcam appears in the device under usb Manager, but under imaging devices and sound happens with one! and said that the drivers are not installed.

  When I try to install the drivers under sound and also imaging devices he returned with access denied and the code 28 error and said that the drivers for this device are not installed.

  Hello cal26,

  Have you tried to visit the website of your computer manufacturer to see if a driver/software update is available for your computer? Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Play two MCs with one button

  Hello

  I'm doing the main timeline go to section 2, and another MC go to section 2 by clicking on a button.

  Here's what I'm trying...

  on (release) {}

  _root.gotoAndPlay (2);

  Snap1.gotoAndPlay (2);

  }

  When the button is clicked, the main timeline goes to frame 2, but the instantane1 (instance name) to MC, do not play. I use AS2.

  ???????
  

  If this code is attached to a movieclip (as opposed to a simple button) button, use:

  on (release) {}

  _root.gotoAndPlay (2);

  _root. Snap1.GoTohasndPlay (2);

  }