Hinge screen loose

I need help to repair or replace my hinge on my Pavilion zv6000 laptop stops.  Can someone help me?  Thank you

They go bad on laptops great desktop replacement.

This is an auction ebay for the hinges.

auction

Even if you don't buy these there is a nice picture on the auction.

Here is the Service Manual:

Manual

Pages 5-3 by 5-39 illustrate pretty well scroll down. Then, you open the display unit (plastic around the screen frame) and replace the hinges. Hinge bolt at the bottom of the main part of the laptop and then go back inside the housing of the image around the outside of the screen display. You remove the assembly the hinge of the screen's existing and override one of both new hinge side.

Before you do this or buy parts ensure that the place where the hinges screw onto the main body is still intact, so that it will hold a screw. If these holes are stripped or if there is damage to the metal frame it, you really have to buy a whole new lower Assembly (cases) for the laptop. Parts are inexpensive for the dv6000, but to replace the structure whole lower mainly designates a complete reconstruction of the laptop. If it's just the hinges, the repair and replacement is only moderately difficult. You have not even need to reroute the wireless antennas or anything like that.

Tags: Notebooks

Similar Questions

  • Y560/hinge screen loose

    . The left side of the screen moves and clumsy because he does not close properly. This happened to someone?

    No one knows how to fix? Like where opening and screw this possible something loose? Or is it broken? :/

    http://Forum.NotebookReview.com/Lenovo-IBM/543887-Y560-hinge-issue-explained.html

  • Portege R700 - the display hinges are loose

    Hello

    my brand new R700 seems to have a bit of a monkey of surrender of a screen on this subject.
    When I use the machine at home, I'm sitting on a coffee table, titration so the screen in an equitable way back at right angles to the display

    If I then get the laptop to use it on mine... well, basically... the screen returns to fully open/flat right through the movement of lifting machine

    Someone else had a similar problem and if yes is it too simple that chew up the hinge bolts and how they access do?
    I rip portable outside all the time, but never a new brand that I'm worried about scratching, so I want to assure you that I understand!

    see you soon

    Ben

    Hello

    Don t have had similar problems with my laptop but maybe the display hinges are loose
    Usually, these hinges are hidden behind plastic chassis and you would need to disassemble the laptop to get access to these parts.

    In general I put t recommend disassemble this laptop pretty.
    First of all, you will lose the status of the guarantee if you would remove the plastic cover.
    Secondly, you may damage or break this, and I think that that's not worth a risk.

    If I was you, I'd spend low and ask a technician for assistance.

  • [HP dv5-1000us] Rolls of screen, loose connection?

    I recently bought a dv5-1000us. Since a few days after the purchase of the laptop, the screen started rolling as it is a loose connection or there is a problem with the screen. I tried to connect the laptop to my tv and different monitors and the screen just rolls on the laptop. If I set the monitor forwards and backwards, he finally stopped. However, recently its gains quite ridiculous and VERY common. Has anyone else had this issue or know a fix? I don't want to lift open the cell phone and void the warranty. I can't really afford to send it off to get fixed since I use it everyday to school. Any suggestion would be appreciated.

    Heres the fix. Take off the front cover and the speaker of the laptop section exposing the cable from the monitor on the left side. Take off the black ribbon that HP used to crimp the Saint * beep * on the cable. Once the cable is able to move more freely, the problem will disappear. There was a wire that was broken in two, and I cut just to make sure he did not contact with something else. It's apparently only a ground wire because he did wrong. I expected to have to buy a new cable, but take off the Ribbon round is played. There will be about 30-40 screws to remove, just a heads. And he is heard as you break the cheap plastic, but it will break again together. Be gentle, but farm and it will come immediately with little damage. (: This fix beats the hell out of pay HP to replace the screen... looking upward from the part of monitor online only given the Assembly WHILE the screen cable.) I will NEVER buy HP after being an avid «passionate» HP

  • iPhone 5 screen loose

    My iphone screen 5 is detaches from the case. I currently have the scotch tape holding it.  However, sometimes I have to touch the screen several times to make an application to function. What can I do? I don't really have the funds to buy a new iphone, and I have Straight Talk where I buy my own phone and have the package unlimited $ 45.00 per month.   Any suggestion would be appreciated. Mike

    Thanks, Mike

    < email published by host >

    Take the iPhone from an Apple Store or Service Center authorized Apple to review your options.  Let them advise you on how best to proceed.

    If you are in the United States, no one else tampered with your iPhone, and screen repair were the only necessary repairs, the fee that apple would charge is US$ 129.  Conditions apply.  But this gives you an idea.

    price of Service - Support Apple iPhone

  • Loose hinge, DM1-4010us

    I have a laptop 2.5 year, model DM1-4010us.  Works very well, but a few months back one of the hinges became loose and flexible.  At least it seems loose and not broken.  But whatever it is, it must be tightened/repaired or replaced.

    Someone at - it experience with this type of repair?  What is a type of DIY?  I contacted a local computer repair dealer and he quoted me a price of $199!  No thanks.

    carbos:

    I sent you a private Message to this topic.

    Eric g

  • HP ENVY M6-1105DX hinges + DvD Drive to good work done?

    Hello. I have some problems with my HP Envy m6-1105dx I received some time around Christmas 2012 from BestBuy. It has been a year of very pleasant to use, especially for games and social networks and other, and I was take care of it, ever since. I've never taken to anywhere outside of my home. I just leave it on a cool table where I can use it as a way to office everyday. However, all about the summer of last year, I noticed from my right hinge becomes very sensitive when closing it. So I thought that maybe I should close more slow the next time. After that around December 2013, the right hinge sprung loose on the right side, make some gaps between the right side of the hinge, on the side of the laptop screen and my monitor display 3 slim blue and purple lines, that irritate me.

    After that, I sent my laptop to be inspected at first sight to a trustworty computer repair store I've visited when my old Office XP does not work. They were my only hope to the fixing of envy, because how my warranty expired around December of the same year, and someone in my house unfortunately threw the case and the reception I got from BestBuy. They mentioned how some companies use cheap adhesives and plastic to make new laptops. Above all, they took note of my DVD drive, which had a yellow bracelet that was not supposed to be as damaged as it seems. (I never really used the DVD player, since I already have music and videos on my phone). They charged me $30 for another review of the laptop inside, and if they found something seriously wrong with the laptop, they would charge me around $20 - $200 extra. At this time, I refused, looking for another way to fix. I tried to visit other repair shops and got the same answers, needing further inspections, etc.

    I really need advice on what to do. I am only a teenager in high school, barely received any money to afford to repair. I have seen videos of YouTube on the repair of several screens of laptops Envy M-series, searched through the internet for several replacements, hinges, etc., screen or other repair shops. The thing is I'm not really confident in my ability to repair a laptop, and it feels like theres really nothing I can do.

    My left hinge is at the point where its about to pop, and I'm starting to see good glue cheap ripping off the hinge, as if it was made in fact at a great price. I really need advice to find a way set these hinges and get my laptop back into shape.

    Thank you for the time and I'm sorry if I wrote too.

    Here are pictures of my desire to M6-1105dx status:

    http://imgur.com/kGKWibo http://imgur.com/C9ovoJi http://imgur.com/NETs37m http://imgur.com/zd6NqG9 http://imgur.com/0yrARZc http://imgur.com/u4OwpCM http://imgur.com/aMZtaRX http://imgur.com/wJytaU7 http://imgur.com/9VNXYZq http://imgur.com/mXRv2Ty http://imgur.com/9qR7wMO http://imgur.com/lzsXTut http://imgur.com/XaY6caC http://imgur.com/KBo3Ja2 http://imgur.com/VMflf3C http://imgur.com/VCWZNh0 http://imgur.com/EwObDwj

    I also have the serial ID and the product ID, which I'll post if necessary. Thank you and I look forward to the answers!

    22/04/14 - Jeff reached out to the customer

  • Four edition of HP Envy 15 t-j100: hinge Brokan on Hp Envy 15 t-j100

    I have a Touch smart cell phone Hp 15 t-j100 quad edition cto and have just noticed that the right hinge is loose or brokan and I heard something rolling inside of it. small looks like maybe a screw or something? I have read many post about people with my laptop model are having the same problem.  Can help you Hp said my warranty is up, but when I check on my warranty status says its still in warranty?

    Went to the HP hardware chat site and explained my problem of hinge for the tech there. She checked my warranty status and confermed that is has been active right now. If HP send a carrier to pick up my laptop for repairs in a few days. I'm happy thank you

  • Who should I talk to? -Cracked rear, curved screen

    I have a Z3 Compact.

    The façade has lifted off and there several long cracks on the back.

    After speaking to someone in the phone shop, I said that it is a common fault with this phone (due to swelling of the battery?)
    And that I should talk to Sony.

    I sent a tweet to Xperia, they told me to contact Sony via a link that led here.

    But the e-mail on the support page button does not work and all I can find is "turn it and turns off again", "reset the device.

    Where am I supposed to go? Whereas a major feature of this phone is being impermeable to water, a screen loose and back Cove are pretty critical mistakes!

    Any ideas? (I'm in the United Kingdom)

    Hello comrade.
    http://mySupport.sonymobile.com/GB/#/support
    Go ahead, find your device click them 'fix' below.
    Follow the instructions to book in for collection or mailing.

  • My HP Compaq Presario is covered under the factory warranty

    I have a HP Compaq Presario, which is covered by the factory warranty. I was wondering if it covers the replacement of keyboard, because some keys are loose. I was also wondering if it cover the screen because the hinges are loose and the 'top' is noisy. It's less than a year.

    Hello

    Please check that it is still under warranty by using the following link:

    http://h10025.www1.HP.com/ewfrf/wc/weInput?CC=au & LC = in

    Then, you can contact HP to get the keyboard replaced using "Contact HP" at the top of this page.

    Kind regards.

  • Questions of T400

    Hey guys.

    The hinges are loose on my T400 and I am on the last day of my warranty. I was wondering if I would be able to move things (keyboard is steep; left clicker under the touchpad is bordering off... etc fall but the hinges are my priority) on my laptop fixed, even if it's the last day. I kept the laptop in excellent condition (I have baby the crap out of my laptop) the last two days on my laptop hinges became loose, however, and whenever I use my laptop, I feel that my screen will simply fall (the horror!) From what I've read on the Web site, if they sent someone to my home to solve the problems of my laptop, it would be the next day and my warranty is over that time it would mean I have to put on a site "lenovo fix - it? Any advice would be helpful. Thank you!

    I would call the warranty #. I always assumed it means that you need to report the problem at the end of the warranty, not that it must be fixed at the end of the warranty.

    BTW, the waiting on parts T400 are 3 + weeks, so you may be waiting some time for them to come in. (I'm now in week 3d of my week 3 ETA on hinges, replacing the screen + card reader).

  • R51: Cracked base, stained glass panel LCD, very bad underwriting experience

    Hello

    I recently sent my laptop for repair Flextronic (Solectron) for a problem with my LCD. On the screen LCD, about 50 grey dots appeared near the Center. They were not dead but pixels spots on the back of the Panel. Before you send the laptop, I checked it and found a crack near the left hinge. I'm on this R51 like a baby and it is in perfect condition with no mark or scratch on it. I noticed the hinge was loose for a few months, but I never checked the cause of this. Now, on the crack, what I noticed is that he depart when I lift the lid and it remains extended as long as the lid is raised. The hinge clearly pushed on the plastic and I am 100% sure that this is what caused this crack. I got a call two weeks after receipt of my laptop in the repair center. They said that they would replace the LCD, but they would charge me $140 to replace the base... I fight with them since to get this base replaced under warranty. I paid for a 3 years guarantee of the site and they don't even offer me the on site service I paid for... I've been without my phone for 3 weeks now and I find it very frustrating.

    Here are some pictures of the crack, on my R51 and the R51 of someone from another forum:

    http://picasaweb.Google.ca/picasawildchild/ThinkPadR51Public#

    Someone else knows a similar crack about a series notebook R5x?

    Thank you

    Gabriel


  • Qosmio X 870 - mouse pad does not work properly

    Hello

    My mouse pad is facing upward and I don't know why. It works when I restart the laptop, then after a few minutes, it does not at all. I checked the properties in Device Manager and it says it works properly... which is not the case. I uninstalled the driver and reinstalled. He always does.

    Not sure if this is related to some of my key of F does not not to my other thread - https://forum.toshiba.eu/showthread...ns-not-working

    A question I've had for a while (which may or may not be related) is my TOSHIBA x 64 compatible ACPI logical value and general-purpose device has a problem. On the device manager says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I uninstalled and reinstalled this with driver Toshiba utility pack and it always happens with this error. I cleaned the registry several times using tuneup utilities 2013. It is probably not bound as it has been like this for a long time with no obvious side effects. But it's annoying nevertheless.

    Maybe windows 10 could save the day (I'm on the 8.1). I hope. In the meantime if anyone has any suggestions I would be very happy.

    Good, someone else who might find this is useful - it turns out that it was a hardware failure. My laptop hinge was loose, and therefore the case had to be replaced. He also replaced the mouse pad - now it works fine.

  • Compatibility of equipment or replacement parts

    Hello

    I have two laptops hp.

    HP DV6710EA (on the screen, it says dv6000)

    HP DV2530EA (on the screen, it says dv2000)

    Q1. How HP labeling its products, because the average dv6000 dv6001, 2, 3 or 2100, 2200, 2500, up to 30000)

    Q2. Is it possible that I can find for the above models found in other models and how I know that. For example when I go to ebay to find the part if she says dv6000 rather dv6710ea, it would be compatible?

    the same dv2000 which is actually dv2530ea (service tag).

    or all products starting with dv6 fact... the same as dv67ea, or dv68ea

    Q3. How do I know if part of manufacturere or the brand or different model will fit into a different model or make? is this possible? like the keyboard, motherboard, etc... is there a simple way to know?

    Q 4 can find a site that can list the compatible models or one that I'm looking for the neares models?

    5 Q What other model would have the same parts for dv2530ea and dv6710ea

    I need hinges, screen, keyboard, screen cover for dv2530ea

    and the motherboard for dv6710ea.

    can you guys please where help and how do I find these pieces, I already tried the same models, but no luck so I was wondering if I can find the same parts in all other models (closer to the models in question)

    This is the first time that I write in the forum please forgive me for spelling errors

    impatience on your part

    Thanks for your help and much thanks a lot in advance for the answers.

    The best way to search for parts of the laptop is to search by part number, not the model number of the laptop. Remove the part you want to replace so you can use it to reference looking for a replacement.

    In fact, I disassembled a dv2500 and a dv2000 and dv6000 an a dv6500. They are similar but slightly different. The two types of main models are the dv2000/6000 with model numbers dvx000 to dvx499, then the largest number starting with dvx500 and top model. And then remember there are Intel and AMD each versions.

    This site has service manuals for any of the above and you can use the maintenance manual for cross reference numbers.

    dv2500 manual

    DV2000 manual

    Above are links to the respective manuals for the dv2000 and the dv2500 and I could link you to the dv6000 dv6500 manuals.

    In other words there is no simple way to answer your question in all areas. What part? What model?

    The dv2000/2500 series are screens of 13 inches, the dv6000/6500 are 15 inches (15.4 widescreen) and the dv9000/9500 are 17 inches.  Electronic components are similar. But for example on the dv2000 it used readers CD/DVD IDE and then the used dv2500 SATA CD/DVD players are therefore not interchangeable. Obviously, the width of the keyboard is different depending on the size of the screen. Once again, what model, what part? It's like asking will be 68 Camaro parts work in a 70 Camaro... Some will, some won't, it depends.

  • HP DV7t-7200 screen hinges loose

    Please help me fix my loose hinges HP DV7t - 7200 Display.  I don't know how to open Notepad for the hinges of the screen.  Thank you.

    Here is the Service Manual:

    Manual

    See Page 92. This isn't an easy solution and it is not as easy as just getting there and a few screws. Chances are that you need new hinges.

    This is a set on eBay.

    http://www.eBay.com/ITM/new-HP-dv7-7000-LCD-hinge-hinges-set-L-R-681977-001-34-4SU02-01X-34-4SU02-02x-/121177836154?PT=LH_DefaultDomain_0&hash=item1c36c30a7a

    If you need more help post back. If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • MacBook pro cannot play all the games.

    MacBook pro cannot play any games.when I start the mac game close itself. If mac works perfectly.

  • where is my head?

    setting has been changed, so I have no header on all screens. How to make a comeback?

  • New MacBook Pro Release - 2016

    I had a PC guy since I started to use computers and a few years ago I bought an iPad and iPhone. I always wanted to buy an Apple computer, but it was too expensive. Given the quality of Apple products, and how the OSX is good, I finally want to inves

  • Slow to connect to the network computer.

    C7280 VIA Wired/Ethernet > Linksys wrt54gs i7 Desktop Core 6 GB RAM HP Vista 64-bit wired to the router & Toshiba L305 Core2 Duo 3 GB RAM Vista HP wireless I just installed a C7280 with all the bloated SW. Now everything works fine except when I boot

  • Windows Mail back my email!

    Windows Mail has returned my email. I've been using Yahoo Mail and somehow all got transferred to Windows Mail. (I must have clicked on something)? It also took all the messages that have been saved out of the server and are now available on Windows