his continued to play after the closure of swf

Similar Questions

• CP7 - quiz slides continue to play after the chronology

  I use slides with audio 7 Captivate quiz.

  Audio playback, I choose an answer and click on send, then click on Y to continue, and if I'm right or wrong, the PlayBar is only 1/2 - 2 / 3 way through the slide.  So I have to wait while the blade plays, long after the audio (and blade) ends.

  The results following is hidden, with the option off in the preferences, so the quiz slide is usually the last slide in the project.

  Anyone know what is happening?

  Thanks for any help,

  Marion

  Point of suspension by default for question slides (and score slide) is half of his chronology. This means that, after the two steps, another 1.5 seconds deals must go with the duration of 3 seconds by default timeline.

  Take a look at my explanations and tweaking possibilities:

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  http://blog.lilybiri.com/question-question-slides-part-2

  You can move the suspension point more towards the end, but only with the mouse (there is no Timing accordion). Or you can change the option to continue to 'Go the next page ├a' both for the success or failure.

  BTW, it of nothing new, has always been the case. The messages have been written for previous versions.

  I recommend you add a last slide after the last slide in the question, it should not be the Score slide, certainly if you want to report to a LMS (leave little time to CP)

• Videos continue to download after the closure of the tabs

  When I discover a video in firefox, and then close the tab to half way through the video that my network meter says that something is still being downloaded. In my avg Task Manager it says firefox still uses my connection. but also, if I close firefox and its processes than on my windows resource monitor shows firefox always use but the application is closed. I did a system restore, but failed, because I noticed it started in the last 2 days and the only thing I have recently install has been updated to adobe. I uninstalled firefox and re-installed. also ran avg anti virus and malwarebytes

  in fact, the problem is back and your solution does not work. I found that temporarily disable avg protection stops the download network. So this has to be the culprit. Any suggestions to solve this?

• Satellite P200 made strange noises after the closure of music

  I have a Satellite P200 and flash cards do not respond and when I ve played music.
  The computer makes strange noises after the closure of music?

  Help me please!
  friend Wendy

  Hello Wendy

  Please don't get me wrong, but it's not easy to understand the problem that is described in your ad.
  I have the same model of laptop and everything works fine. I listen to music every day on Windows media player (mp3s) or radio listening online using the Winamp player.

  At the same time, I can use flash cards.

  What about strange noises? Who knows what you mean exactly and how us need to understand that?
  If please be so kind and explain exactly what you do and what kind of sounds you can hear.

• QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Dell Inspiron5100 WinXP SP3.

  Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

  Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

  Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

  When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

  CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

  It WILL play CDs of music (mp3s)

  Found the following material etc.

  Provider: Microsoft Corp.

  File version: 5.1.2600.5512 (xpsp 080413-2108

  Driver date: 01/07/2001

  Driver version: 5.1.2535

  Driver files

  C\windows\system32\DRIVERS\cdrom.sys

  "" "" \DRIVERS\imapi.sys

  «"\DRIVERS\redbook.sys «»

  «"«\system32\ c:\windows\system32\storprop.dll»»»

  I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

  FIXIT now brings me HERE

  It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

  From: * e-mail address is removed from the privacy *.
  To: * e-mail address is removed from the privacy *.
  Date: Tuesday, May 17, 2011 08:30:29-0700
  Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Response

  Hello

  1. are you able to read any type of file .doc or .txt of DVD?

  After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

  I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

  on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

  2 , what exactly happens when you try to burn the CD? You get the error message?

  Not nothing... He's here

  3. How do you try to burn CDs?

  MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

  4 have you tried to play the DVD content in ? windows media player

  I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

  Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

  I did the entire bottom.

  1. click on Start, click Control Panel, and then double-click System.

  2 click on the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  3 right-click on the CD-RW/DVD drive, and then select set to update driver.

  He asks if I have an OEM driver and / disk... NO.. I run the program through...

  "Hardware update Wiz can not find a better match the software installed"

  4. right click on the graphics card and select Update driver. »

  There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

  I find:

  AUDIO, VIDEO and GAME controllers (announcement)

  Audio codecs

  Audio drivers

  Legacy video capture device

  Media control devices

  Audio Sigma

  Video codecs

  All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

  ?!  Ethernet controller "drivers for this divide (code28) is not installed.

  ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

  Device type - other devices

  MFG-unknown

  Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

  Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

  See also:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

  "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

  UNKNOWN

  Title 1

  Title2

  Title 3 etc., but could not do anything with this list.

  He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

  Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

  So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

  I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

  Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

• How to keep playing the last song played after the external card refresh

  Does anyone know how to continue to play the last song played after the update of external card? Every time when I connect and disconnect the player from the PC to update some of the songs it refresh the external memory card and then play the first song of the record. Can anyone help? Thanks in advance.

  Adding or deleting files trugger a database refresh to disconnect from the computer. This resets the file before playing. There is no way to change this.

• process on the main window to stop running after the closure of a modal dialog box

  Hi everyone, I am new to Oracle Forms so any help would be appreciated.
  
  Here's the scenario: I'm on MY_MODALESS_WINDOW and run a trigger that looks like:
  
  ================================
  execute_trigger ('TRIGGER_1');
  If form_failure then goto FAIL; end if;
  
  show_window ('MY_MODAL_DIALOG');
  synchronize;
  raise form_trigger_failure;
  
  execute_trigger('TRIGGER_2);
  If form_failure then goto FAIL; end if;
  
  < < FAIL > >
  null;
  
  ================================
  
  -No error in compilation.
  -Here is the number: TRIGGER_2 has never been called/executed after the closure of the MY_MODAL_DIALOG?
  
  Thanks again,
  
  Published by: user12216598 on March 12, 2010 09:07

  As I said before, open a modal window does not stop execution of the current procedure. If you need this behavior, put your modal window and all its components in another form module and use CALL_FORM to open this form. Then the execution stops at the CALL_FORM statement and and will continue after the CALL_FORM when you leave the form called.

• Emails disappearing after the closure of my Windows Mail (Vista)

  After that I opened an email in my Windows Mail (Vista) then close it, the next day, when I look for this email went. I looked in, "Delete","" box of ", etc. They simply disappeared!?    Even on the date and the same time if I see email is after the closure, but then I click on 'Junk Mail' for example and then again in box enamel disappeared.  When I realized what was going on I tried 4 times with odd ball different emails and it happened every time.

  In each folder: view | Current view. Make sure show all Messages is the only option that is checked.
   
   

• Inadmissible Windows desktop after the closure of the programmes

  Hi, I recently met a problem with vista. IM on windows vista Home premium service pack 2. A few days after the closure of a program that my office did not at all, cannot select all the icons on the desktop and right-click on it also did not work, it seems to be with various programs and not bound to a single, though the first program that screwed up windows Explorer, I was reviewing some files. My menu of the taskbar and start work very well and can get into almost anything from there. When I want to restart my computer I see then all selections that I did on the desktop suddenly appear just before the reboot like something is hung up. I have norton 360, valid copy and its updates and is not at all to any virus. Someone who can help I would be greatly appreciated!

  Hi, I recently met a problem with vista. IM on windows vista Home premium service pack 2. A few days after the closure of a program that my office did not at all, cannot select all the icons on the desktop and right-click on it also did not work, it seems to be with various programs and not bound to a single, though the first program that screwed up windows Explorer, I was reviewing some files. My menu of the taskbar and start work very well and can get into almost anything from there. When I want to restart my computer I see then all selections that I did on the desktop suddenly appear just before the reboot like something is hung up. I have norton 360, valid copy and its updates and is not at all to any virus. Someone who can help I would be greatly appreciated!

  To make sure that I understand what you were saying...
  Your problem is that your desktop icons are not suitable.
  But if you open the start menu, you have no problems to access anything whatsoever.
  If my understanding of your problem is correct, then maybe your desktop icons are corrupt.
  Here is a tutorial that will help you rebuild your cache of icons:
  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  Please let us know the result.

  t-4-2

• When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. are you referring to the startup sound?
  3. What is the brand and model of the computer?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• How can I keep the workstation user interface log after the closure of the workstation?

  Hello

  On a Windows host, the newspaper of the UI for desktop is called vmware - < user name > - < PID > .log and is stored in the user's TEMP directory. Now, I got a problem that occurs during the closing of the workstation. I want to check the log to see what's happening, but the user interface log is deleted automatically after the closure of the workstation.

  Is there a way to tell the workstation no do not remove the log of the user interface? Thank you.

  Well, can you try this?

  %AppData%\VMware\config.ini to edit and add:

  UI.log.FileName = "C:\some\path\to\logfile\vmui.log".
  UI.log.Keep = 'TRUE '.

• Video stops playing after the transition

  I want to embed a video in a Keynote slide so that the video starts to play just after the slide in video. When I play the presentation and advance to the slide video, it plays for 1 second, then stops and the presentation falls back in design mode. I tried different video clips and they all do the same thing.

  The video is a MP4. I can integrate the same video into the Powerpoint presentation and it plays OK.

• Flash animations will not play after the flash update

  Hello

  It's really weird, but flash animations on most sites (sites like Ustream) will not play after that I updated the flash player. The funny thing is that on youtube play very well. I've tried disabling the addon of shockwave, relocation, etc., but nothing works. This problem is with firefox only because as the Chrome and Explorer the flash player works fine.

  Thank you.

  Thank you. In fact, it was not necessary because I have disabled protected mode flash and who did it. However, seems like it is not the best option but average tiem, I guess I have no choice.

  Thank you.

• After the closure by Satellite L750D cannot get back in victory when opening again

  Hello

  I have this weird problem when I close my laptop L750D that I can't get back into windows after opening it again. The first seconds after the opening of the laptop, the screen is black but then suddenly shows the login for a short-lived seconds, but then immideately screen fades to gray, then to the dark as his tent to save energy. I can press any button or anything either, but it won't let me in windows.

  So I have to stop the laptop with the power button so that it restarts again. But of course it wil mention that I didn't close properly the last time and pushes me to a safe boot option. Its a new laptop and I cannot find any problems simular anywhere online. Also I gues is a simple parameter or a combination of keys I know of.
  Help, please!

  Very appreciated

  Oxavon

  Hello

  Well, if a new BIOS is available, perform an update.
  Otherwise, I guess that the laptop enter sleep mode after the lid has been closed
  So in this case disabling this could help, but of course, it would be just a temporal solution
  Do who go to control panel-> options and power on the left, click Choose what closing cover