Emails disappearing after the closure of my Windows Mail (Vista)

Similar Questions

• WiFi connection disappeared after the last update of Windows

  I have a Gateway laptop and I have to be using software wireless Broadcom with a Verizon MiFi 2200 for my internet connection.  It worked fine until a few days ago, when a Windows Update has been installed automatically.  When I try to get a connection it will never end the authentication process because it doesn't seem to be able to assign a valid IP address more.  What happened and how do I fix it?

  Hello

  Make sure that the software firewall not reset the zone of confidence and the wireless traffic cannot reach the wireless router.

  In general, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• X 1 carbon after the closure of cover: Windows has recovered from unexpected shutdown

  Hi all

  I saw this forum since I got my X carbon 1. Its a great machine, but I just startred a problem. Whenever I close my lid and open it back up after a few minutes, the computer is black screened and custom allow to reconnect. If I leave it for a while, it will be an "unexpected shutdown" and reboot and give me the details of the problem, once it gets to the home screen.

  Here are the details:

  Problem event name: Blunescreen

  OS VERSION: 6.1.7601.2.0.256.48

  Locale ID: 1033

  BRITISH COLUMBIA CODE: 9F

  BCP1: 0000000000000003

  BCP2: FFFFFA8004149060

  BCP:FFFFF80047733D8

  CP4:FFFFFA8003B0B010

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  A couple of things that may be a coincidence or cause?

  (1) I have to connect the internet access where I was this weekend. He keeps having limited access to the network, while other computers can connect.

  (2) the symantec anti virus trial the day ended, it started.

  (3) I use a lot of web storage services (google drive, skydrive) and maybe they're trying to connect when I shut down the computer?

  (4) when it is closed and I unplug the charger, the charge indicator light on the outside remains lit out for some reason any. Don't know if that is related but it shouldn't behave like that my understanding of the computer.

  If anyone can help me, I would be very grateful!

  Best,

  ER

  Hi all

  What the matter was, it has since resolved itself. I think it is the anti-virus software. MSE installing fixed. See you soon!

• Unable to connect to the internet after the system restore and Windows Installer (Vista)

  Hello

  I have recently restored the whole system on the HP to my sister a virus that I was unable to remove it manually.
  The system restore went well until it has reached the point where he was going to reinstall Windows. The computer just turned itself off and the software installation was not complete. I am able to reinstall again. I must therefore hold the CTRL + alt + delete, go to Task Manager, click on audit.exe and complete the process to turn on the computer. But I can't do anything with it in safe mode. The main problem is: I can't connect to the internet! Even if the network discovery is on it will not find my wireless network. What can I do on the internet? And is it possible to install Windows again without the CD?
  Thanks in advance!

  Hello

  ·        You are able to boot to the desktop in normal mode? If this isn't the case, then you get any code or message?

  ·        How did you did system restore?

  ·        Are you referring to the system recovery using the recovery partition or the drive?

  I suggest that you start in safe mode with network and check if you can access the internet?

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: select SafeMode with networking among the startup options.

  Respond with the required information so that we can help you further.

• Inadmissible Windows desktop after the closure of the programmes

  Hi, I recently met a problem with vista. IM on windows vista Home premium service pack 2. A few days after the closure of a program that my office did not at all, cannot select all the icons on the desktop and right-click on it also did not work, it seems to be with various programs and not bound to a single, though the first program that screwed up windows Explorer, I was reviewing some files. My menu of the taskbar and start work very well and can get into almost anything from there. When I want to restart my computer I see then all selections that I did on the desktop suddenly appear just before the reboot like something is hung up. I have norton 360, valid copy and its updates and is not at all to any virus. Someone who can help I would be greatly appreciated!

  Hi, I recently met a problem with vista. IM on windows vista Home premium service pack 2. A few days after the closure of a program that my office did not at all, cannot select all the icons on the desktop and right-click on it also did not work, it seems to be with various programs and not bound to a single, though the first program that screwed up windows Explorer, I was reviewing some files. My menu of the taskbar and start work very well and can get into almost anything from there. When I want to restart my computer I see then all selections that I did on the desktop suddenly appear just before the reboot like something is hung up. I have norton 360, valid copy and its updates and is not at all to any virus. Someone who can help I would be greatly appreciated!

  To make sure that I understand what you were saying...
  Your problem is that your desktop icons are not suitable.
  But if you open the start menu, you have no problems to access anything whatsoever.
  If my understanding of your problem is correct, then maybe your desktop icons are corrupt.
  Here is a tutorial that will help you rebuild your cache of icons:
  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  Please let us know the result.

  t-4-2

• When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. are you referring to the startup sound?
  3. What is the brand and model of the computer?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• process on the main window to stop running after the closure of a modal dialog box

  Hi everyone, I am new to Oracle Forms so any help would be appreciated.
  
  Here's the scenario: I'm on MY_MODALESS_WINDOW and run a trigger that looks like:
  
  ================================
  execute_trigger ('TRIGGER_1');
  If form_failure then goto FAIL; end if;
  
  show_window ('MY_MODAL_DIALOG');
  synchronize;
  raise form_trigger_failure;
  
  execute_trigger('TRIGGER_2);
  If form_failure then goto FAIL; end if;
  
  < < FAIL > >
  null;
  
  ================================
  
  -No error in compilation.
  -Here is the number: TRIGGER_2 has never been called/executed after the closure of the MY_MODAL_DIALOG?
  
  Thanks again,
  
  Published by: user12216598 on March 12, 2010 09:07

  As I said before, open a modal window does not stop execution of the current procedure. If you need this behavior, put your modal window and all its components in another form module and use CALL_FORM to open this form. Then the execution stops at the CALL_FORM statement and and will continue after the CALL_FORM when you leave the form called.

• Why my old emails disappear from the cloud?

  Why my old emails disappear from the cloud?  After only a month or two, they are gone! (and I pay extra each month more space!)

  Hello Unhappywoman,

  Thank you for using communities Support from Apple!

  From your post, I understand that old emails are deleted after a month. This can be due to behaviors of the mailbox defined for your iCloud account.

  The following article explains how to look at these settings. My suspicion is that the section "permanently erase deleted messages when:" is set at one month old.

  Use Mail preferences to set or change options for e-mail accounts , you use mail and to work with messages and mailboxes. Choose Mail > Preferences, and then click a preferences panel for the options:

  • Accounts: Add, remove, and disable your email accounts in mail. Use only the part of the mailbox behaviors to control how the project, junk, sent, and deleted (or "Basket") messages are stored. Advanced pane includes options for messages, attachments and more.

  Set Mail preferences - help Mail

  See you soon!

• Satellite P200 made strange noises after the closure of music

  I have a Satellite P200 and flash cards do not respond and when I ve played music.
  The computer makes strange noises after the closure of music?

  Help me please!
  friend Wendy

  Hello Wendy

  Please don't get me wrong, but it's not easy to understand the problem that is described in your ad.
  I have the same model of laptop and everything works fine. I listen to music every day on Windows media player (mp3s) or radio listening online using the Winamp player.

  At the same time, I can use flash cards.

  What about strange noises? Who knows what you mean exactly and how us need to understand that?
  If please be so kind and explain exactly what you do and what kind of sounds you can hear.

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• How can I keep the workstation user interface log after the closure of the workstation?

  Hello

  On a Windows host, the newspaper of the UI for desktop is called vmware - < user name > - < PID > .log and is stored in the user's TEMP directory. Now, I got a problem that occurs during the closing of the workstation. I want to check the log to see what's happening, but the user interface log is deleted automatically after the closure of the workstation.

  Is there a way to tell the workstation no do not remove the log of the user interface? Thank you.

  Well, can you try this?

  %AppData%\VMware\config.ini to edit and add:

  UI.log.FileName = "C:\some\path\to\logfile\vmui.log".
  UI.log.Keep = 'TRUE '.

• ICloud emails disappear at the time of my Macbook Pro when I delete a message from iCloud of one of them?

  I'm an old Geezer Mac, but a Newbie iCloud. I just put on my two Macbook Pro iCloud email addresses and access e-mail through Apple Mail on both computers. Here are my two questions:

  (1) iCloud emails disappear at the time of my Macbook Pro when I delete a message from iCloud of one of them?

  (2) if I move an e-mail message to iCloud Inbox Mail at Mail Archive on a Macbook, can I delete the message from the second Macbook without losing the archived message?

  Yes, that is what is supposed to happen with an IMAP e-mail account.

  If you move it to a folder on the Mac, not in the iCloud account, you can remove safely icloud.

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• the safari app disappear after the ios 9.2.1 update how to recover?

  the safari app disappear after the update to 9.2.1 on my iPad IOS 2. How the GET it back?

  Bangkk,

  Read the response of diesel valuable0 in Safari missing since iphone.