Hive workspaces - Public Documents

Similar Questions

• Repair corrupt C:\Users\Public\Documents folder?

  1. you previously recommended CHKDSK. I ran and then asked your advice (as follows):
  After that I ran checkdsk, which took about an hour to complete, there is no "checkdsk" files like it use (in the good old BACK time); the files use to hold all the missing data files "lost".  I search my hard drive for all files created after I ran checkdsk, but none are here.
  MY question is: where are the fragmented files that use CHKDSK to find and write on the C drive?
  2 nobody "accidentally deleted" files. I'm the only one that is "sharing" of files between computers, and it arrived I tried to delete a folder in the file in the public Documents.
  3 Kevin.  Can you answer the following question: before this incident, the case was classified as ".. \Public\Public Documents.  After the mysterious disappearance, the folder has been renamed '... \Public\Documents ', in other words, the 'Public' in front of 'Documents' is no longer in the public folder. a single word 'Documents' why? What is a part of the problem? Thank you

  ilsils66

  You mean you did the RESEARCH to find the crease and found him, but would not open if yes try right click and restore the previous Version . It should give you an option to choose what time you want to select.

  Please let us know

  Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forum and let us know what you think.

  Kevin, please explain how to get .to restore a previous Version , right click in a search box. I looked everywhere, but there is no Previous Version of restoration . Thank you

• How to merge "Public Documents" and "My Documents"? The user in the 'Documents' files do not appear in 'My Documents', but are in "Public Documents".

  Win7 HP SP1

  These files appear in 'Documents', but do not appear in 'My Documents'

  They appear in "Public Documents".

  How can I merge the records of theses and never save in "Public Documents".

  Most is the user created, some files are program files.

  I have a profile of the 'public' on my computer when I connect, but I never use it, unless the office staff has a lot of programs open and I want to watch a movie

  or something I can change user to ease up on the use of the RAM.  Not sure if it is effective.

  examples of FLE: crashdump (empty)?, funny, auction sales of goodwill, agreements of music songs,.

  NativeFus_Log (empty)? , Tango (1The, a download of a messaging application), telescope, Youcam (program)

  There is also a 'my images' and 'Public Pictures', not sure why.

  Thank you!

  Right-click in the document library, click Properties.  Choose here, whether you want the public location to not use (or you can even remove it completely).  You can also choose which location is used as the default save location.

• public documents

  My public documents folder disappeared, even if the 'shortened' is there. When I click on the open folder location I tells me that it is in 'My Documents'

  but it is not in my documents, although I can always access it by using the shortcut. Any ideas?

  Thank you.

  I wonder if there is a misunderstanding here... Of JWS (Hi new JW!) link is a useful guide to restore accidentally deleted items, but reading your q you say you "can still access using the shortcut" then it is more than it's missing from the library of documents rather than have been deleted?

  If so you need to go to the users of OS - Public - public Documents highlight - right click and select 'Include in the library' and choose 'documents '.

  JWS response or above should sort you out!

  Greetings - R

• Restore the file Public Documents for C:\User\Public

  I used the reg file to restore the C:\Users\Public\Documents folder, but after the restoration, it's the name shows just like Documents, not as public Documents.  Some software specifically want that name of Public Documents, so how can I get the name to show this way?  (Name change isn't the answer.)

  See this tutorial.

  http://www.SevenForums.com/tutorials/69334-public-folders-restore.html

• All the files are copied in public Documents

  Hello

  I have weird problem. I use the local account (Administrator) in my office windows 8. Every time I have copy something for Libraries\Documents he goes to the public Documents even he should go to My Documents. I didn't change the settings associated with it (at least not in the object). Earlier, it worked as expected. I guess this can be fixed, but the question is how? Because now I did not find any related to this setting.

  -Janne

  Hello

  Open libraries by clicking on the left of any folder in Windows Explorer.
  If 'Documents' is not a listed library, then click library and chooserestore default libraries to fix.
   
   
  your backups should automatically go to your real 'My Documents'. The "public documents" are what other people on your network would see if they were trying to access the files on your computer (your my stuff is private).

  The documents 'library' trying to be helpful by showing you all files that are located in two folders, grouped into a single list. Therefore, alibrary.

  You can tell the library for not showing the public folder by opening your library of documents, and then on the blue highlight at the top that saysincludes 2 communities. Here, you will be able to remove the Public folder of the library. But the record will still exist and the other people on your network can store files, by default.

• restrictions on user wget to download public documents

  Dear

  Experts

  My client, a proposed solution to give me to download public documents can Server Oracle Data Integrator is

  OS command wget http://host.com/cs/groups/bibPUBLIC_biblio/documents/sys/doc_name.csv

  No restrictions for this purpose?

  Thank you

  There are several links to examples of content using RIDC here download: https://jonathanhult.com/blog/2012/12/ridc-examples/

  Jonathan

  https://jonathanhult.com

• OAM 11gR2PS2 - no authenticated access to public Documents at the Complutense University of MADRID

  Hi all

  We had a requirement to one of our clients, in which the documents who have received the public's access to the Complutense University of MADRID should not be challenged for authentication.

  Examples of URLS that are not in dispute when you use the managed for UCM server port (16200)

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  http:// xxx.com : 16200/cs/groups/public/documents/digitalmedia/b2dv/xzmx/~edisp/dev_complogo_31364.jpg

  This GS search page ready must also open without authentication.

  http:// xxx.com : 16200/cs/idcplg? IdcService = GET_DOC_PAGE

  After the configuration of SSO and protection/CS, when I go above URL using the port of OSH only the second opens without challenge me the name of user and password.

  Knowing that I can protect/unprotect URL patterns, I was wondering if this is possible using OAM at all.

  The document is assigned to a group of public safety at the Complutense University of MADRID.

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  By looking at the URL, would you be able to identity if this url is to document to the Group of public safety? All of the query parameter would help you to differentiate the document in the public safety group

  If the answer is NO then you will not be able to create policies OAM who could remove the URL

  If the answer is YES you can then use 'Query parameter' section resource OAM to remove the specific URL

  hope this helps

  Concerning

  Aakash

• Why Firefox insists on connect to public documents googledocs, IE does not care.

  I did a Googledoc, made public and sent the link to a few people. They told me that they cannot see the document because they are not connected to googledocs. When they tried through Internet Explorer, they got the document. An example is entered below

  No, I do not have an account of GoogleDocs, and I tested it on a naked Firefox profile that does not have the saved, especially for Gmail passwords I use.

  How do I know that you sent this link?
  
  I made this based on this assumption:
  
  "and sent the link to a few people."

  Otherwise, how would you send this link?

• How long must wait until a user setting OTN account until he or she can discover a hive workspace

  Hello

  I have setup a group with more than 80 members.

  about 20 are now in the workspace.

  but some are reporting that even if they checked their accounts OTN > 24 36hrs / there they still cannot access the workspace.

  is there a standard processing time:

  OTN configuration and checking account being seen as being checked in the hive group admin

  Since then found in the admin to the status of participant group on group workspace

  concerning

  Neil

  Neil,

  We had some problems with the WWLDAP directory - sometimes you have to move to the Dominican Republic and when they switch back, the instance BOWL without exceeding - replication between sites can get some delays which can do the commissioning phase 2 fail, then the user that checked watch but is not supplied with booty.

  Send the group details to [email protected] and we will check the scripts.

  Phil

• where is the workspace stores documents?

  Hello
  I downloaded the Word documents and Excel in the workspace folders explores. Does anyone know where those who are actually stored?

  Hello

  They will be stored in \hyperion\products\Foundation\workspace\data\RM1_\root
  They are given an id that replaces the file name for example 0000012564304b 72-0000 - 0f68 - c0a80104 that connects to the repository workspace. tables, the file extension is already deleted.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to disable this option? See the image. Don't know if its called a workspace or document box but now its one more thing I have to reduce or close when I have not open my files

  It is also in photoshop too

  Window > Application frame

• Restore 'My Documents' and 'Public records' alias after moved folder

  I moved my folder "Documents" of the user, as long as the public 'Documents' of my boot drive to a new drive for storage of files, I added.

  To do this, I opened the properties of the folder, the location tab and used the move... button to direct to the new location.

  After, my "Documents" library entry shows two folders 'Documents '.  Before the move, these folders have been listed with the alias "My Documents" and "Documents", which was a welcome orientation for the scope of these two files the same name.

  How to recreate these aliases at this point?

  Well, it's good. It is a common mistake for people to hurt set the new location as D:\ just for example, which means the entire root of the drive's "documents folder" (not exactly the end of the world, but it is difficult to undo and even harder to explain).  Anyway, you avoid this pitfall.

  The word "public" shown is not actually part of the name of the documents folder (not the 'my' on your own file).  It covers based on the presence of a text file inside the folder that told him of the special Act.  The folder itself is still called 'Documents' (complete actual path of C:\users\public\Documents), but the folder icon shows "Public Documents" because there is a file with hidden text in the file called desktop.ini telling him to see it.

  

  This part is pointing shell32 is just to find the English version of "Official Documents".  You could do what you want, such as:

  

  The folder looks like that it's called "Public things", but we call it actually still just 'Documents '.  The name is set according to the text of Desktop.ini.

  So in short, just to put this text file in the folder, mark it as a file system / hidden, and it will allow you to set the name of "presents itself as" to anything you want.

• How to include folders to D: drive, specifically in Documents public, not only in the document library?

  Windows 7 Pro 64 - bit SP1: how to include records of the D: drive in public Documents so that they become automatically visible to each user who opens his library of Documents? At present, I can only include these folders in the document library, invisible to other users. I don't want to load large files physically in the C: drive, where public Documents.

  You can do this easily because public Documents is a folder, not a library.

  You can place junction points in public Documents that point to folders on the disk D:\.

  To do this open a command prompt by typing cmd in the box to start the search, made a right click the program cmd that appears in the search results and click 'run as administrator '. Type the following command and press ENTER:

  MKLINK /J "C:\Users\Public\Documents\Folder" "D:\Folder.

  http://TechNet.Microsoft.com/en-us/library/cc770988 (v = ws.10) .aspx

  You may need to adjust the permissions of files and folders on the drive D:\ so that all users can have access to them.

  I have not tested it; so be cautious.

• Hive online: how to fix coding error or invalid connection of content?

  Hello
  
  These issues relate to the following hive workspace:
  
  Workspace: Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
  Login: [email protected]
  
  
  The '[email protected]' Login is a member of the valid workspace to the workspace: Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
  . This connection was used successfully for about 6-months to Exchange data between me and the user. On a recent attempt to connect, the user gets the following error in FireFox:
  
  Content Encoding Error: The page you are trying to view cannot be shown because it uses an invalid form or no compression support.
  
  A similar error is generated when you use Chrome or Opera. IE is back with a unable to join Server error.
  
  
  Which told me the user, it's that she has recently reset its password. Subsequently, the error above after the login screen.
  
  A few other points that was told by the user who do not have too much sense to me. The user declares that the system gives a connection error "invalid" when it uses the e-mail address: "[email protected]." The user says that login needed to use "[email protected]". However, the enamel that is recorded is '[email protected]' on the page: https://beehiveonline.oracle.com/teamcollab/participants/Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
  
  Any help on how I can get his email address "[email protected]" works correctly for the workspace Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace
  would be greatly appreciated.
  
  Thanks in advance,
  
  Mike

  Hello

  His "[email protected]" email is one that she should use or content encoding error will be returned. It's an ugly error, but it means that the user has a valid SSO account but not a valid account of BeehiveOnline - if she uses "[email protected]" then it is not valid, and generates the error.

  There are 2 accounts in the system of wwldap - one for each and I think the user mistook the account/password combinations - nothing has chnaged on the system and the "[email protected]" account is still valid and active.

  I checked the logs and it is with the wrong username and 304 error returned:

  access_log.1342612800: [email protected] [18/Jul / 2012:13:05:31-0600] 1 "GET/teamcollab/library / Documents/Synopsys_Spice_and_FastSpice_Simulation_and_Analysis_Workspace/Oracle HTTP/1.1" 500 304 "-" "Mozilla/5.0 (Windows NT 6.1;". WOW64; (RV:14.0) gecko/20100101 Firefox/14.0.1.

  Phil