HKEY_CURRENT... ShowMyComputer (Hijack.StartMenu) - >... While I am I supposed to do. He said: it was not fixed

Similar Questions

• I have restored the laptop to factory settings, the product key sticker is faded... While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  I bought my laptop with microsoft office 2010 is installed. I restored my laptop to factory settings, the product key sticker is faded so I used jellybean keyfinder to get it. While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  What should I do to make it work again?

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010. Also using the value default key OEM SLP for Windows 7 does not work with Office 2010

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• can someone help me while I install windows 7 I got massage that windows did not read my DVD my lap top hp probook 4540 i5 s any help pls

  can someone help me while I install windows 7 I got massage that windows did not read my DVD my lap top hp probook 4540 i5 s any help pls

  Hi, Ahmed.

  Have you tried using a different DVD?

  I would also create a USB support and then try to install.

  Take a look at this-

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  To let us know.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• HI - bought a kit of the student.    And for a while creative cloud consulted well.   But now - my access does not work, and he goes to the members section (which I already have).  Also - although I'm going to download bridge and illustrator, I could

  HI - bought a kit of the student.    And for a while creative cloud consulted well.   But now - my access does not work, and he goes to the members section (which I already have).  Also - although I'm going to download bridge and illustrator, I could never get to download Photoshop.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• I am interrupted me while you browse on safari with a message that I was a winner at random and click ok. I can't get rid of this page, even disabling the I Pad, so I am not able to browse other sites.  What can I do?

  While browsing in safari on the I Pad2, I interrupted with a message "http://surewin.online congratulations Hastings visitor.   Your I Pad has been chosen at random! Click Ok to see your reward with a value of more than $349. »

  I cannot get rid of this very page by disabling the i Pad and you do not want to click OK without knowing more.  Someone else with this question or advice on what to do?

  Force quit safari by double clicking the home button and then tap the preview for safari off the screen

  Go into settings, safari and remove history

  For good measure, force your iPad to restart by pressing the home button and sleep for 20-30 seconds. When you see the white Apple, let go and let it reboot, then try again.

• While streaming a archive of the radio show, my headset does not work?

  I can listen to different media sources using headphones, but with Mozilla my headset does not work when you try to stream my favorite (kfjc.org) radio station broadcast archives. Sound continues to my crappy Laptop speakers.

  Thank you! It worked.
  Happy Holidays everyone.

• While in documents or selection of printers, the scroll bar does not stay in position but returns to the top

  Bar scrolling in documents, when you select a program, does not take the program but slides back to the top in a resting position

  the same thing when I'm selecting a printer, or by selecting a type of paper, or any choice where I drag me down or left to right

  with the bar.  He does not take it, but returned to the rest.

  Bar scrolling in documents, when you select a program, does not take the program but slides back to the top in a resting position

  the same thing when I'm selecting a printer, or by selecting a type of paper, or any choice where I drag me down or left to right

  with the bar.  He does not take it, but returned to the rest.

  It is Virus and malware/Microsoft Security Essentials Forum software.

  Your question is not related to usage of Microsoft Security Essentials (MSE) or viruses and malware.

  Could be a bit of time, but if you will be patient a moderator will move your post in the appropriate forum.

  Kind regards...

• How can I enter a genuine key to the back of my Dell laptop sticker while I get the message that my copy of Windows is not genuine and was not used this product key at installation time?

  I had instattation of some retailers and its Windows xp with service pack 2

  This has nothing to do with the Windows Update feature.

  1. Download this diagnostic tool, save it to your desktop, and then double-click the saved file: http://go.microsoft.com/fwlink/?linkid=56062

  2. after running the tool, click on the continue button, and then click the copy button (to the Clipboard).

  Note: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3. start your own, new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

• After the use of kodak, while a USB printer to computer months several said now it is not connected. I then installed my Canon printer - computer says again - not connected.

  Kodak printer leave scanning and copying - only a few months - then tried to reinstall my Canon printer - computer writes that both printers were NOT connected even if all have been connected and printer lighthouse was lit. On top of that error code 66A is also a headache. All solutions outside of the payment of the registry helps who want a small fortune to fix the mistakes of hundreds of couple, they claim, they found.

  Hello

   
  Fix the .net Framework 4 installation
  
  Windows Vista users follow these steps to repair the installation of .NET Framework 4:
  1. close all running applications
  2. click on start, type Uninstall in the start search box and then click on uninstall a program
  3. double click MICROSOFT.NET Framework 4 Client Profile to start the .NET Framework 4 Client Profile Maintenance application
  4. Select repair .NET Framework 4 Client Profile to its original state and click Next
  5 allow the repair to complete and then click on finish
  6. click on restart now to restart your computer
  7 and then try to install the drivers of canon and check.
  You can also check this link:
  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update
  http://support.Microsoft.com/kb/2507641

• An error occored while reconnecting to Z: at \\BRENLEEBOLIN\Public. Microsoft Windows network: the network path was not found. This connection has not been restored,

  A can not access my respect (z), on my Microsoft Windows network, the network path is not found, the connection has not been restored.

  The PC called BrenLeeBolin is actually shot?  It is physically on the network?  Can you go to the BrenLeeBolin PC and see if the Z:\ drive is actually still there and readable / write?

• Lightroom 5.7.1 does not open.  There is an error message that there is an error while reading from the cache of the preview.  How can I fix this error?

  Lightroom 5.7.1 does not open.  There is a message that there is an "error reading from the preview cache".  How can I fix this error?  I can not find the folder cache of Lightroom preview either in the "Programs folder or the programs (X 86) folder."

  Hi PMB.

  You must remove the preview for your Lightroom Catalog Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted. Here is a picture of what it is named as default Lightroom5catalogPreviews.Lrdata.

  Location /Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows Pictures/Lightroom on MAC

  Delete this folder and restart Lightroom

  

  Let us know if this helps

  ~ Assani

• Error Photoshop CC while opening jpeg files created less than 24 hours ago "could not complete your request because it is not the right kind of document.

  I am under photoshop cc and a sudden am this message cannot open jpg files. And so, I used photoshop to create less than 24 hours. Any suggestions?

  Thanks for sharing files.

  Looks very good load on my end.

  Suggest you to reinstall Camera Raw from this link and then check: https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

• I'm trying to update my applications. (Ch &amp; Lr) After crossing change password etc. It seems that my purchase was not registered even if used for a while. Now what?

  I'm trying to update my apps (ch & Lr) after crossing the password change ect. It seems that my purchase is not complete. The note says "that it could take 24 hours. Finally, although I have used for some time and received a notice of updates available. Now what should I do?

  Please visit:https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  I hope this helps.

  Concerning

  Megha Rawat