HO Officejet 6310 all-in-one: 6310 print only 1/2 of the first photo on 2 5x7s

Similar Questions

• HP support cannot get officejet 7310 all-in-one to print even though looks and sounds like it is.

  Printer, HP officejet 7310 all-in-one had not been used in 3 weeks.  Cartridge black ink but nevermind. New in color cartridge.  Print test works very well.   Do you have the drilling cleaning cartridge.  Downloaded diagnostic printing and scanning tool.  He ran.    Yes, it prints, but only a couple of lines are visible, but barely, ghostly, and then nada.  The color cartridge is not used.  This on a PC with windows XP.  So far, the printer worked great.  The same results if using Notepad or an Internet site.  Suggestions anyone?

  The obvious suggestion is to replace the black cartridge.  If you need print now, you can use reserve mode or select photo paper (which will use only the color cartridge).

  The printer will automatically not using the color cartridge when the black cartridge is out of ink.  If you want to use the color cartridge to print in black, you can remove the black cartridge.  The printer will then give an error on the screen but is printed in reserve mode using only the color cartridge.  Copies cannot be predicted with the printer by way of reservation, you will need to replace the black cartridge.

• HP Officejet J4580 all-in-One: I just need a disc from the drive, please!

  OS was wrong?

  Hello

  The disk may be too old now. If please download and install the following software and driver:

  http://ftp.HP.com/pub/softlib/software10/COL22247/MP-58704-2/OJJ4500_Full_10.exe

  More resources:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers

  Kind regards.

• my all in one 2610 printer is not compatible with the imac using Yosemite

  my HP all in one printer 2610 does not seem to be recognized by my new imac and I kept problems so uninstalled. Now, I want to try and reinstall it, it says that yosemtie does not support PC applications. Is there a way around this or do I have to buy a new printer? If I can anyone recommend a good that is compatible with my iMac?

  We invite you with pleasure!

  Scanner failure indicate a hardware failure of the bulb scanner, such a harware failure is likely to prevent other features like the all-in-one device is based on one of its components and the device is ' t ready to process a print job.

  Follow these steps to disturb such a, if the question is I'm afraid, maybe it's time for a new printer:

  http://support.HP.com/us-en/product/HP-Photosmart-2600-all-in-one-printer-series/391114/model/391116/document/c00587971/

  Kind regards

  Shlomi

• C4750 all-in-one will print only 2 page 8

  I finally got my all-in-one printer of C4750 to leave saying he was offline now, now it will print only less than 2 pages of a Quebec of 8 pages.

  Hi CIN4,

  Thanks for the reply.

  I would recommend that you download and run the HP print and Scan Doctor and see what diagnosis it can offer you

• Photosmart B010a All In One test print O: K: does not the computer print

  EGR: GIS. No error message in the control panel is READY, printed the test. Don't print your computer. 6220 with windows 7/64 bit HP computer. = network WI Fi of tiscali. the printer is connected with a cable to the computer. I also tried with the doctor. Please help me understand where I went wrong; I installed the last type of software and drivers available. Thank you, cordially Costanzo

  Photosmart All In One B010a stampa di prova 02: computer dal non stampa

  EGR: GIS. Message error nel pannello di controllo pulito PRONTA di Nessun, ha the prova stampato. Stampa NON to dal computer. HP computer a window 6220 con 7 64-bit. Rete is tiscali WI Fi. stampante e collegata con computer of al it cavo. Ho tried anche con doctor. Per favore save a just dove ho sbagliato. Ho da the Ultimo tipo di software e driver available. Grazie, Web Saluti Costanzo

  try to connect the printer to your laptop with USB connection.

• OfficeJet J5740 all-in-one is printing words backwards

  OK, first of all that I never heard talk of a printer, print the words back, so I really didn't have a clue where to start. My daughter was printing 2 pages of his school report and the two pages the words were back, ideas?

  OK it's corrected, it was caused by windows xp service pack 3, somehow active the "mirror image" setting in printing preferences, so I just turned it off and now it works.

• OfficeJet 6500 all-in-one 709n: printing address labels

  I am trying to print Avery 5160 using Ms Excel and merge and mailing address labels in MS Word.  Data print incorrectly on the labels.  Tops are too low and one on the bottom are too high.  Help, please

  Hello! Welcome to the @Quickie forums

  I would recommend to change the quality of 'Best' when you try to print your labels. Best mode will pull the slower paper and sometimes will help properly align the labels.

  Changing the settings to print in Windows 7

  If this does not help, thanks for posting this concern in the Avery Help Center for better exposure on the issue with printing on Avery labels.

  Happy Monday

• HP Officejet 4500 all-in-One wireless printer

  The OP is win7 64-bit.  Control Panel to say 'NOT INSTALLED driver FOR THE HP3CC282 (HP OFFICEJET 4500 G510n-z). However, the properties of the printer show that this version of the 6.1.7601.17514 driver is installed. Why he says miss me the driver when properties shows me it's there?

  OK, go ahead and uninstall the software from the Control Panel, and then install the full feature software.

  Once you have installed the software, let me know when the printer is connected and you can print.

• HP Officejet J5780 all-in-one will print test and diagnostics pages but nothing else

  I tried to install my Officejet J5780 on a Windows 7 machine and install CD does not work for Windows 7.  Downloaded the software and drivers from the HP site and since then the printer prints a test page or a page of diagnosis etc but nothing of MS Office or Notepad.

  Any ideas?

  Hello

  I see that you have a problem with the printer. I would say that runs the print and scan the doctor.

• OfficeJet j145 all-in-One black print quality deteriorates

  When printing of plain black text (ie. text in a Word document) deteriorates print quality.  Black text seems to be more than a dark shade of grey/purple.  If the printer does not receive heavy use I have never had to change the printheads.  I ran a few tests provided in the User Guide and have never got the message "Change print heads" appear on the printer as indicated in the User Guide if I needed a replacement.

  Is this sounds like I'm needing a new printhead black anyway?

  Thank you-

  Thanks for the post of Bob.  I ran the test report and the ink levels seems to be ok; expired ink cartridges are June 2010 so we are ok.  The printhead of the report information section displays status = OK for the printhead (cyan, magenta, yellow and black), however the rectangular box above the black status area washed out looks like at best.  The print heads have been installed 30/04/2003.  I'll replace the print head back and see if things improve.

  Thank you once more for the information; I really appreciate it.

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!

• HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

  Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

  The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

• HP Officejet 7610 all-in-one. where to place an item on the glass tray to copy?

  On the glass plate of the scanner, place the photo to scan? All I get is color bars...

  Thanks, that did it! I always get about 3 inches of colored bars any outside the image I scanned. Don't know what to do about it, but can live with it.

  Thanks again for your help. First time to the Council for help.

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.