Hola tengo windows vista starter wont in mi pc Hay algna forma mahjons titans get?

Hello

Unfortunately, the community of Windows is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

http://support.Microsoft.com/common/international.aspx

Tags: Windows

Similar Questions

After Windows Vista starts in a minute, or sometimes less my office goes from his normal self in a white pagecould someone please help me get back to my office?

I tried to restart my computer, but only to get the same result, I tried to backup and resture but my computer tells me always that it is restureing the computer already. If someone can help or has had the same promblem I would like to know what I could do?

Thank you

Dave.

Hello
- You receive an error message?
You can view these methods:

Method 1:

Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.

Step A.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
f. do whatever tasks you need and when you are done, reboot to return to normal mode.

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Step B.
If it works fine in safe mode try performing a clean boot in order to find the cause root.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

Method 2:

You can always follow performance issues in Event Viewer that all error codes are followed here.

Reference:

Open event viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

How to stop disk check to run every time that windows vista starts?

How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?

Hello

This tells you how to enable and disable it:

How to difficulty Chkdsk will not run at startup in Vista
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

Video: Stop Check Disk from constantly running at startup in Windows Vista
http://blogs.TechRepublic.com.com/itdojo/?p=193

ChkDsk runs every time Windows starts.
http://www.WinVistaClub.com/T20.html

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Genuine key of Windows Vista Starter DVD already used after formatting PC!

I have a real DVD of Windows Vista Starter. It has been activated and worked very well. But after a few PC, formatting and reinstalling, it says key already used and I'll have a temporary profile with features in need!

My copy is authentic and I have the key, but it fails to activate! ???

Hello

Take the option phone, skip the automatic steps, and brace yourself for a real person explain to the.

"How to activate Vista normally and by Activation of the phone '

http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

1. open the Start Menu.

2 in the white line (search) box, type slui.exe 4 and press enter.

3 select your nearest store and click the Next button. (See screenshot below)

4 click on continue in the UAC prompt.

5 a local phone number should apear with a set of numbers generated by Windows and displayed on your screen under step 2: . (See screenshot below)
NOTE: It will be a series of numbers within the 1 to 9. I just removed here for obvious reasons.

6 call the phone number of activation chosen.

etc etc.

See you soon.

Windows vista starts up on my dell inspiron 530 s.

Windows vista starts up on my dell inspiron 530 s. When I turn on my computer, I get a bootmng lack of press ctrl alt del to resart message. When I put my vista disk in my cdrom and resart it only tells my no detected bootdevice. help!!!!!!!!!!!!!!!!!!!!!!!

Hello

Try to use this information from Dell, including the F12 Diagnostics.

http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

See you soon.

Windows Vista starts

my stand of windows it goes to the "Startup Repair cannot repair this computer automatically".

I can't record mode or another function

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Data recovery, if required:

1. slave of your hard drive in another computer and read/save your data out there.

2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

3 Alternatively, use Knoppix Live CD to recover data:

http://www.Knopper.NET/Knoppix/index-en.html

Download/save the file Knoppix Live CD ISO above.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://isorecorder.alexfeinman.com/isorecorder.htm

Download the Vista software from the link above.

After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

Click on the icons of hard drive to open and to understand which drive is which.

Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Obtaining recovery Vista Media and/or use the Partition Recovery Vista on your computer, to return to the factory settings.

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their way of doing recovery disk/s.

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

See you soon.

Mick Murphy - Microsoft partner

code 80070002 error appears during the update of windows vista starter

During windows vista starter updated operating system, the 80070002 error code appears on the screen and could not update and install something. How to solve the problem? Product key-33qmg-pb76m-kbpwd-mbqd3-k6ggk

Sylvie chandrasantra,

80070002

Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

http://support.Microsoft.com/kb/956698>

05/14 / 1104:51: 22 am

I need a product key, I lost my Windows Vista Starter pack

I need a product key, I lost my Windows Vista Starter pack with HCL laptop with the product id 89571-OEM-7332204-00608

If you reinstall using the manufacturer's recovery media, you should not have a key for Windows

If you try ot turn on Office applications, you must purchase a license.

Your own product key for Windows is on the COA sticker on the case of the machine - or possibly inside the battery compartment.

Windows Vista start problem, \windows\system32\boot\winload.exe.__Could not load because the app is missing or damaged.

Does not allow me to do a restore, unable to access all the files.

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the provided link and do a repair of the disc.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Data recovery:

1. slave of your hard drive in another computer and read/save your data out there.

2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

3 Alternatively, use Knoppix Live CD to recover data:

http://www.Knopper.NET/Knoppix/index-en.html

Download/save the file Knoppix Live CD ISO above.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://isorecorder.alexfeinman.com/isorecorder.htm

Download the Vista software from the link above.

After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

Click on the icons of hard drive to open and to understand which drive is which.

Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

They will tell you how to do this.

Every computer manufacturer has their way of doing recovery disk/s.

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

See you soon.

Mick Murphy - Microsoft partner

When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?

Original title: Msimbz32.dll

Hello

When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?

Best wishes

Hassan

Hello
Try the methods provided below and check if the problem persists.

Method 1:

Msimg32.dllis a file system in Windows Vista

If you get the message when you open any program or when you start suggests that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

For more information please visit the link below.

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

http://support.Microsoft.com/kb/929833

Method 2:

Perform the clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.

Windows Vista starts only with the loading screen

Original title: Problem with Vista Business

I have a pc with vista professional in this regard, there is a problem with the windows and it does not start, just on the loading screen. The machine came with a disc of recovery for xp only. I'm trying to find a download of Vista business so I can fix it rather than having to restore to XP. Anyone know where I can download it?

Hello RussellNolan,

It may be possible to solve this problem without having to reinstall the operating system.

What exactly happens when you try to start normally?

Let's start with the safe boot mode:

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

If it works, we can try to boot minimum troubleshooting:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Let us know if this helps out.

Best regards

Matthew_Ha

Windows Vista starts with an empty office

original title: when I turn on my DELL PC with VISTA I have no images desktop taskbar icon, none of this show is a program window, but it's a pain. Can it be fixed or that THX

What huh?

Hello

What of the 'safe mode' - did you try to run? Here's how:

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

and in safe mode, if it is possible, you can run "System Restore":

http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

Choose the date , when the PC worked OK.

LC

my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now

and I need my computer quite urgent for the University.

Thank you very much!

Hello

No saving necessary data and re-installing Windows Vista might be the best option, but here
are a few others.

You can save your files by putting the drive in another computer as a 2nd disk (best) or external
Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
Of course a real store of the computer or the manufacturer of your system can help to recover the files.

Or you can use a boot Ubuntu CD to back up data.

Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

--------------------------------------------------------------

You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.

A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

First check this thread in case it is simple and if not to come back to this thread.

http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.

Here's a video of one of them.

http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

You can create a recovery disc or use someone even version (making the system restore it)
must be bootable).

How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

------------------------------------------------

These require the correct Vista discs since you can not start safe mode.

Try the Startup Repair tool-

This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

Try recovery options Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

-----------------------------------------------

Here are a few Google searches where many have found different solutions:

Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

Vista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

-----------------------------------------------

If necessary and you can access all ordinary Windows.

You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

You can use another DVD that aren't copy protected but you you need to own
Product key.

On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

If nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

How to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

---------------------------------------------------------------------------

Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")

c:

cd\

CD c:\Windows\System32\winevt (there is a space between cd and C :)

Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

RESTART Windows

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

cannot check the updates on my windows vista starter error code 8024402F keep on showing if I tried

my window vista Starter is set to automatic windows update as well as my defender.it windows runs smoothly before until I uninstall my previous antivirus for microsoft security essentials, did I made the wrong move by replacing anti virus?

riza castillo,

See the following topic for your question

http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa >

http://support.Microsoft.com/kb/836941>

06/15 / 1111:55: 13 pm

On startup, I get a "error 0xc00000e9 saying that windows/system32/config/system is missing or damaged, but sometimes after several tests, windows vista starts finally."

My pc has even sent to ASUS and they said they had set, but within months, he started the error again. I even had a computer programmer look at the and reinstalling everything, but still the error comes and lately, it happens every time you start :(

Hello

I suggest you to follow these steps and check if that helps.
Method 1:
Try to start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135

NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

It will be useful.

Hola tengo windows vista starter wont in mi pc Hay algna forma mahjons titans get?

Similar Questions

Maybe you are looking for