Portege M700 - 4 devices called Data Interface in the Device Manager

Similar Questions

• Portege M700 with Windows7 / problem with assignment of the tablet buttons

  Hello

  After the upgrade of my Portege M700 Windows 7, most of the hardware seems to work.

  One exception are the tablet buttons to adjust the orientation of the screen, or to be used as replacement of slider. When changing the mode of the Tablet (e.g. for the entry of notes during a meeting) the original installation (VISTA) offers certain functions by the buttons on the Tablet (e.g. moving cursor, new page, scroll through the pages etc.). But it seems that these buttons are predefined for some functions of windows and I don't know or find no tool to change that.

  I installed the latest version of the utilities TOSHIBA (util_tvap, value added package) but can't find any tool to affect the proper functioning of the buttons on the tablet.

  Tips how to handle this?

  Thanks in advance...
  Peter

  You have upgraded your Portege laptop using Toshiba upgrade kit or you have installed the clean version of Win7?
  Usually, when you perform the upgrade using the Toshiba upgrade and upgrade pre-installed Vista everything should work properly.

  You also have the latest version of the BIOS?

• How can I export all the data collected on the page manage the of Echosign (list of all signed documents) to an excel file?

  Hello, rather than saving contracts individual pdf, I was wondering if there is a way I can export all of the data collected from the various contracts in a single great file?  Thank you

  Hello Olivia47511068,

  If you have used a library template to send the documents for signature, you can export the values of individual transactions by going into the tab manage and then scroll down to the section template Library, single click on it and on the right side, click on the history tab and select ' export the data. It will download the CSV file with data of form field of all transactions made using the model of the library.

  -Usman

• Portege M700-7008 how can x - I recover the system if F8 ist is not possible?

  The Notbook has an invisible partition from which the system can repair or restore. Theoretically, should I start with f8 in the meantime. It does not work.

  The main problem is to change the mini. I must begin by LAN to disable. After the reboot: 'NTLDR is missing... ". »

  After a lot of experience, I think, I did more damage than necessary.

  "NTLDR is missing...". "also, if I start with F8.
  With F2 or F12 I can get a surface from which I get CD, USB stick or memory card can begin.

  Can I get from there to somehow invisible to the system recovery partition?
  The device is without Recovery DVD. If asked by the store, if I can get a. If get me one, I still don't know. Currently I have none.

  Thank you

  P.S. This is a Windows XP Pro (Tablet)

  Hello

  I think that there are not many things to do

  If you have an original CD of Microsoft Windows XP, then you could use and might star of the repair console. But to be honest it really delicate s to use the console repair XP and you've got limited access capabilities.

  But it looks like you don t have this CD and so you last resort would be the new installation of the OS.

  Good luck

• Portege M700 - 3G does not work and has no entry in the Device Manager

  Hello

  I've already found [this | http://aps2.toshiba-tro.de/kb0/TSB0302TL0000R01.htm] for 3G installation, but it does not help me. In my device manager is no entry called 'Data Interface', and that's why the guide will not work. Under "modem" is only the "TOSHIBA Software Modem. The LED next to the orange wlan LED is off. When I use FN + F8, the I get only entries for Wlan and Bluetooth. In the Bios (or what ever Toshiba call a bios, 3 pages with very few options, very bad in my opinion) I couldn't find any option to turn on the 3g modem (I suspected that it be turned off in the Bios).

  Is there an option where my 3G modem could be turned off, so that the device manager would be ' d recognize it? WIFI and BT operate correctly.

  A new SIM card is correctly inserted in the SIM slot behind the battery. I can't find my problem described in the web or this support forum.

  Any help is appreciated!

  Hello use

  Your laptop is preinstalled with original Toshiba recovery image, I mean you have to factory settings?

• Portege M700 and Windows 7

  Hi all

  I installed Windows 7 RC on my Portege M700, and everything was fine, except:

  -Intel(r) Management Engine Interface (show on the device as a PCI Simple Communications controller Manager);
  -Novatel Mobilink to the Novatel Wireless Broadband (3G HSDPA) SM-Bus minicards Modem integrated (EU870D) (list on the device as 4 Interfaces of data manager).

  I used the drivers on Windows 7
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814& rpn = PPM70U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768662 and all fine wenf.

  I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager.
  But when I try to install the v2.02.27 from Novatel MobiLink available [here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=2 & selFamily = 4 & selSeries = 157 & selProduct = 773 & selShort Mod = 684 & language = 13 & selOS = 26 & selType = all & yearuploa d = & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = 8 & page = 2 & startPage = 1] he justs roles back the instalation before it's over.

  Do you know if toshiba plans to deliver a version of Mobilink from Novatel compatible with Windows 7?
  And what of the Intel(r) Management Engine Interface? There will also be a compatible version?

  Thanks in advance guys...

  Hello

  > I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager. But when I try to install the v2.02.27 from Novatel MobiLink available only here it justs roles back the instalation before it's over.

  The point is that you tried to install the driver on Win 7 OS Vista and this could be the problem. Seems the Vista driver is not supported with Win 7.
  Of course, some drivers Vista would go with Win 7 but not all drivers are compatible.

  I think you have to wait until the drivers Win 7 for the 3G module would appear.

• Portege M700 - DVD drive fails during the recording of discs

  Hello

  I tried the Disc Creator that came pre-installed and also Nero 9.2.6.0. All this on Vista 32 bit.

  The latter seems to have no idea about the problem, as it says smething like unknown failure.

  The creator of disc mentions error code 380381-26-BF040304.

  The problem occurs only at the beginning, I tried with three discs, so I don't think that the disks are the problem. In any case, they are DVD + R DL Verbatim and support up to 8 x, while the recorder goes only up to 4 x for the double layer, so I think I'm ok.

  My suspicion is that maybe the firmware in the DVD version needs update... He mentions Hw 1.00, 1.10 Fw. Other manufacturers of laptop as offer updated firmware DVD for her, but I couldn't find one of TOSHIBA.

  Any ideas?

  See you soon

  Hello

  There are several disks for Portege M700, they are compatible. Usually in the user manual, you can find a list of supported CD/DVD players they are pre-tested by Toshiba and work correctly.

  If you have any other questions about a new drive, ask the service provider authorized in your country. They can offer you a compatible player.

• Portege M700 - Ultra Slim Selectbay HDD expansion?

  Hello

  I tried for a while to buy an adapter for my Ultra Slim Selectbay HDD in my M700-139. I can't find a buy in the United Kingdom who said that it is compatible with the M700.

  Does anyone know if it is possible to buy an adapter for this Bay - and if you can, any idea where to buy from?

  Thank you very much!

  Hello

  I found this:
  http://www.shopbot.com.au/pp-Toshiba-slim-SelectBay-HDD-adaptor-pa3408u-2etc-price-93894-3626292.html

  But look, man. all compatible parts and Portege M700 supported parts can be ordered from the ASP in your country.

  Maybe contact the guys then you would ask this adapter.

  Welcome them

• Portege M700 - need drivers for Windows XP Home edition x 64

  Hello

  I recently bought a Portege M700
  It comes preinstalled with Vista on the disc.

  Now, I got an original Win XP x 64 and all my programs are not really compatible with Vista. If I want to install Win XP x 64.
  I have install Windows XP Home edition x 64, but there are no drivers for it, only for drivers vista and Windows XP tablet pc edition.

  Is it possible to find the drivers for Windows XP Home edition x 64?

  Someone at - it already had a problem like this one?

  in any case thank you already for the answer.

  Hello

  I doubt that you can get 64-bit drivers for Windows XP for this laptop from the Toshiba driver page.
  I didn t find drivers for Windows XP 64 bits for Toshiba laptops.
  Why? I think the Win XP 64 bit was not so popular like Win XP 32 bit and most of the applications have been designed for XP 32 bit OS.

  If install you XP 64-bit on this computer, you will have to look in the various 3rd party Web sites for the compatible drivers

  Good luck

• Portege M700-130 + Portreplicator + external display

  Hello

  We have a Portege M700-130 with the PA3508E-1PRP portreplicator and have a problem with the external display (monitor) connected to the portreplicator.
  The OS is Vista Business. The external monitor is an EIZO S2401WE-GY.

  Now the question:
  * Can you just place your Portege in the portreplicator, start it with the key to the portreplicator and get an image on the external monitor to the connection of the operating system image without doing anything on your laptop? *
  It would already help us if someone with the Portege even and a portreplicator can give us his experience about it.

  Because we can't, but we have absolut want to achieve or better should. We have tested all the settings in the power and hardware configuration options. The point is: when the Portege gets started without portreplicator and is remplace replaced offshore in the portreplicator, then began with the portreplicator the external monitor goes black when loading of the connection of the operating system image. Only after that the laptop screen is fliped open, we get an image on the external monitor.

  Help or an answer, I'd be very appreciated. Thanks in advance!

  Hello

  One of my friends has tested this on the Portege M700 Vista OS.
  It connected the external monitor using a VGA (analog) and DVI port.

  It seems that it works as you suggest in your ad.
  The Portege lid is closed and connected to the external monitor.
  You do not need to touch the Portege M700. He should start by pressing the key of the duplicator.

  Welcome them

• Problem with webcam not fixed with Vista SP1 on Portege M700

  The Vista SP1 does nothing to the failure of Vista to recognize the built-in webcam Portege M700.
  The existing forum thread mark this question as a response, despite the link to the document toshiba mentioning the error messages entirely different from those cited by those of us with problems

  I find it strange that the M700 UK wouldn't have a built in webcam; is it really true?

  Hello

  I noticed a problem with webcam in time early Vista release, but it was linked to the Vista OS stroller and was solved by SP1.

  Sorry, but another problem with webcam into the unknown for me and as far as I know internal webcam works fine also on Portege M700.

  As you already suggested the internal webcam is not available on all Portégé M700 series. Toshiba notebooks, any series, are equipped with different hardware specifications and example to the webcam internal, in the light of the webcam and internal microphone are available on some models.

  Maybe no problem with a webcam, but some Portégé M700 does not really have an internal webcam ;)

• How to write the Date/time of the PDM file property

  On the page root of the PDM file, there is a predefined, property called ' Date/Time' in the first row.

  I would use it to save the timestamp when the tdms file is created. But in the help file.

  I find that the following property constant. So, how can I write to the field of property ' Date/time '?

  Property	Constant	Data type
  Name	TDMS_FILE_NAME	String (char *)
  Description	TDMS_FILE_DESCRIPTION	String (char *)
  Title	TDMS_FILE_TITLE	String (char *)
  Author	TDMS_FILE_AUTHOR	String (char *)

  Thanks for any idea or suggestion.

  You are not sure if it's exactly what you want, but have you tried that?

  CVIAbsoluteTime            CVItime, *t = NULL;
  TDMSFileHandle          deH = 0;
  
  // Create TDMS file and set some properties
  errChk (TDMS_CreateFileEx (file, TDMS_Streaming2_0, TDMS_ByteOrderNative, 0,"example.tdm", "someText", "title", "author", &deH));
  
  // ...
  
  GetCurrentCVIAbsoluteTime (&CVItime);
  errChk (TDMS_SetFileProperty (deH, "Date/Time", TDMS_Timestamp, CVItime));
  
  // ...
  
  // Save and close fileerrChk (TDMS_SaveFile (deH));TDMS_CloseFile (deH);
  

• How to set up the AP Manager interface on vWLC

  Hello all,.

  I want to bulid a laboratory wireless env, vWLC is used, but I can't find where I could configure AP Manager interface vWLC.

  How do I creat an interface of the AP Manager?

  Thank you for your help.

  1.How many APs could this Dynamic AP Management support ?

  No limitation on the interface. It all depends on how can license AP you have on your vWLC

  2.We can't creat AP manager interface on vWLC like real WLC , right ?

  Yes, good. New platforms of controller, there is only the interface of management exist. There is no separate AP Manager interface.

   3.How can I distinguish my AP's  "Country Code"  ?

  If you look at your reference number AP (see the version should also give this), it indicates a regulatory domain (for example - A,-E, n, z). This means that your vWLC set up with a country code in this regulatory area. The document below for more details http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html * don't forget to rate our answers if you find them useful * HTH Rasika

• Portege M700 - 7004V Display Device change Utility does not

  Hi all.

  I have problems with the utility to change device display on my Portege M700.
  I am in charge of a school district with 110 Portege tablets, but I can't understand it.

  For some reason any when I press Fn + F5 (which is the default configuration to switch display devices), nothing really happens.
  The screen flickers very quickly as if she is still looking for another device. Press it again, the same thing happens.
  Press it again, the screen goes black (as it should), but even when nothing is displayed on the projector connected to him.

  On all the other 109 pills I, change display utility works very well.
  In fact, if you hold down FN and press F5, but continue to hold down the Fn key, a box appears and tells you which device you try to switch to.

  Here is my configuration:

  Windows XP SP3 (up to date)
  New version of:
  Intel graphics drivers
  Toshiba controls
  TOSHIBA Hotkey utility for display devices
  Toshiba display device change utility
  Toshiba Mobile Extension

  This computer is imaged from the same image that have other computers (which all work.)

  Is there something in the registry that toggles? Is there something in msconfig, that I can check? This problem is to get the best of me!

  Thanks to anyone with the time and patience to help!

  Hello

  To be honest, I put t know what might be the problem, but it is recommended to reinstall the necessary drivers.
  First of all, you need the common Modules!
  This tool must be installed first.
  Then you can try again to install the v2.0.1.9 change of display device. and then the Hotkey utilities for display v3.4.5.5 devices

  Also the display driver should be updated and if necessary check the update of the BIOS.

• Portege M700: Device Manager reveals five peripheral generic HID-Compliant

  We have a M700 Tablet, which came with Vista, but came back to XP using supplied reinstall drive.

  The machine works fine for most, but sometimes suffers from a deadlock, which seems to be related to the touch screen.

  In device manager reveals five generic "HID-Compliant device" that appear to be duplicates for the other five entries in this section - the other entries seem to be the correct devices because they have specific names - Toshiba tablet buttons type "N" 'USB Human interface device', 'Virtual Driver Touch' "Virtual touch interface" and "Wacom Penabled dual touch"-if each device properties are inspected the settings under 'Driver', 'Détails' and 'Resources' are identical.

  I tried to remove redundant entries by deleting in normal mode and safe, but devices reappear.

  Is it possible that I can remove these entries and eliminate a conflict between these elements as a source of blockages.

  Thank you very much

  Hello

  Normally it should t be a conflict for resources between these different devices.
  The Windows operating system should assign automatically different resources if it is needed.

  > I tried to remove redundant entries by deleting in normal mode and safe, but devices reappear.

  You can disable the device in Device Manager.
  You must first mark the device and then turn it off using the Disable option.
  It s a red circle with small PC.

  See you soon