Homegroup in Win 7 machines problem

Similar Questions

• 18 Firefox does not work on Win 7 machine

  I recently installed Firefox 18 on my Win 7 machine. It does not work properly. It takes a long time to start, and when it started it sticks when I move or click the mouse in the majority of web pages. I can search with google and go to pages chosen according to the data presented. But once I get on a page, almost any mouse action blocks it.

  (I'm in the United Kingdom. An example of failure is if I call John Lewis with Google and select the entry of Electricals from johnlewis.com. You try to select whatever it is on this page crashes)

  I went back to Firefox 5.0, which is the most recent previous version I can find. That seems to work perfectly.

  Try the Firefox Safe Mode to see how it works there. Safe mode is a troubleshooting mode, which disables most of the modules.
  

  (If you use it, switch to the default theme).

  • You can open the Mode without failure of Firefox 4.0 + holding the key SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the menu option help and click on the restart with the disabled... modules menu item while Firefox is running.

  Do not choose anything at the moment, just use "" boot mode safe. "
  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
  If it's good in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one.

  To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

• IP renewal failed when XP to Win 7 machine (cable LAN Thr.)

  Trying to connect Windows XP machine to Windows 7 computer via typical LAN cable, the goal is to connect to the internet using Win 7 machine. This used to work perfectly more early but recently I get about WinXP "Limited or no connectivity" error after trying to fix his getting failed renewing IP address.

  Here is the error message
  "Windows could not finish repairing the problem because it is impossible to perform the following action:
  Renewal of your IP address.

  I tried:

  1. IP assignment (for IP v4 and disable IP v6) and define it for obtain an IP automatically.

  2. disabled firewall on Win7

  3-ipconfig/release and / renew on both machines

  Help, please.

  Trying to connect Windows XP machine to Windows 7 computer via typical LAN cable, the goal is to connect to the internet using Win 7 machine. This used to work perfectly more early but recently I get about WinXP "Limited or no connectivity" error after trying to fix his getting failed renewing IP address.

  Here is the error message
  "Windows could not finish repairing the problem because it is impossible to perform the following action:
  Renewal of your IP address.

  I tried:

  1. IP assignment (for IP v4 and disable IP v6) and define it for obtain an IP automatically.

  2. disabled firewall on Win7

  3-ipconfig/release and / renew on both machines

  Help, please.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/limited-or-no-connectivity-in-XP-using-wireless/09a38e80-A296-4f7e-8366-71d05306cd61

• I can not remote desktop in a Win 7 machine

  Since August patches, we cannot int remote desktop a Win 7 machine. It lets me initially and then loses the connection. So when I try to find it again, it is not found. If I reboot, think likewise. Allows to connect you then disconnects the session, don't me even find the machine...

  Any ideas. Not him did not do anything for the firewall. In fact, I think that people with reduced mobility. IM in the same office with the machine. Thank you.

  Steve Erlitz

  You are in a domain environment? If so I suggest posting on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  If this is not the case, have you tried to go back in time to a restore done just before point what happens then replace updated one by one to see which one is causing the problem?

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

• Why will win 10 does recognize not my account of ADE - it works on my other computers - and informs me that any ID used on the Win 10 machine cannot be used on this computer and cannot be used elsewhere - this despite ADE being supposed to be multi platfo

  Why will win 10 does not recognize my account ADE - it works on my other computers - he informs me that any ID used on the Win 10 machine cannot be used on this computer and cannot be used elsewhere - this despite ADE being supposed to be multi platform/machine. More than 10 years with the same account I have never experienced this before.

  Close all applications.

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept

  Select the key of the follower.

  Choose file > export.

  In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Close the registry editor.

  Open Adobe Digital Editions and reauthorize.

• I took new Acrobat 8.1 machine power off and want to install it on the Win 7 machine instead.  How can I do this with success. It of not accept series and code

  My 8.1 machine crashed, so I took all my files on it and it gives more.  So far so good.

  I have a Win 7 machine and when I went to install the Adobe Acrobat XI standard on it, even after entering my series No. and redemption code, it's not accept it.  Do I have to get a new serial for the new computer no.

  Hi lindat97814795,

  Let me know the exact error message?

  Also check your serial key by using this link to quickly find your serial number.

  You can download & install Adobe Acrobat XI standard using this link download Acrobat products | Standard, Pro | DC, XI, X.

  Kind regards

  Nicos

• Problems of connection attempts WIN 2000 machine to the net via wireless network

  Sorry, I know this is an XP forum, it is a question of WIN2000 - I hope someone can help.

  I have a wireless network using WEP - try to connect to laptop WIN2000: router wireless card the two NETGEAR.

  I have configured the sw of the laptop wireless networking and now get indication * that I'm connected to the network *.

  However - to try opening a browser, the indication is that there is no internet connection available. (Side: if I run an ethernet cable into the port on this machine, I can connect.)

  Got a limited assistance of internet service provider - ran ipconfig / all.  One thing that seems to stand out is the line "' active... IP routing: No."-I'm over my head at this point, but that seems important to me. " Next line is "WINS Proxy enabled: No.»

  Can someone help me out here? The information I have provided is important? (I can provide more information to ipconfig) All I can configure here (? activate IP routing?) Other (s) diagnosis I can do?

  Any help would be most welcome!

  Kind regards

  Bob T

  Hello

  Win 2000 has no internal support for the wireless.

  In order to launch the wireless, you must use a wireless card that provides you with Wireless Manager and drivers for the card on Win 2000.

  Once you have installed the drivers and the utility is launched, you should power set up the connection to the router wireless.

  Start first with the security of the router, enable WEP, once you know that you can log in and access the Internet.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• WIN a key problem in vmware workstation, using a linux machine and a windows XP guest.

  Hello

  I'm using vmware workstation 6.5 on a linux kernel 2.6.27 host and I installed a windows XP as a guest, when I press the down arrow key, think the comments is a SUPER (WIN) key, how can I solve this problem?

  but when I use rdesktop to connect at this prompt, key perform normally.

  Without more information, it is probably related to the known bug xkeymap.keycode in my computer at the moment.

  You can find a solution: HERE

  Or in the Sub-forum of the workstation, just do a search for "xkeymap.keycode" or something...

  I hope this helps!

• I have problems to install the software for my Officejet 6500 has more on my Win XP machine.

  
  
  Follow instructions for 'clear' all the stuff of temp and started around. Much to my surprise I had the same problems all over again. I can't understand this update of the player from Nvidia. But your suggestions led to a workaround. Once I was allowed to leave the area temporary and tried to re install I went back after my problem continued to search for anything I might have missed. I was able to locate the new Temp directory that had just been created via the HP software. I have this opening was able to directly run the installation from this directory and he did not get given wrong directions to the Nvidia. Installation was successful

• I continue to have problems to download my recently purchased Photoshop elements 14 to my Win-10 machine.  Instead, I have two 2 files, 1) Application with zero-byte and PART 2) file with different number of bytes per attempt to download.  Where can I get

  Hello, someone at home?

  the file of the piece is a partial transfer... you may need to wait any longer so he can complete the download.

  You can also use another browser or use a different wired connetion to use a download manager.

  You can dl from prodesigntools.com.

  Download Adobe Photoshop elements 14, first direct links too. ProDesignTools

• WIN XP boot problem

  At the start of Win XP, I get the expression "UNMOUNTABLE_BOOT_VOLUME".  What is the problem and how can I get the machine to reboot?  Turning market does not work cannot find the CD...

  With so little information (because MS Answers forums don't invite any), see if it sounds like your question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

• Difficulty installing and using HP printers on the same two Win XP machine

  It is a question of both parties please.

  I have two HP printers, a PSC-1400 and a C4280, which I connected to my generic desktop computer Win XP Pro.  I have always used the drivers for the two that come with Win XP and all two prints very well but I would also like to be able to use the scanners in the two that seems to require that I have install both disks that came with the printer.  My problem is that the discs do not autorun when it is installed and I do not know which files must run to start a full installation of the HP software.  Will someone tell me please where to start with the installations?  I have more printed instructions that came with the machine.

  A second issue is that I actually have to run both disks for these two machines?  Because the C4280 machine is the most recent of the two, the software include and provide the functionality of AIO for the older machine like the C4280?

  Thanks to all those who may be able to get me made in the right direction with this problem.

  This announcement will close this request for assistance.  I have two AIO machines work enough for my needs.

  To get this far I first removed all HP using my Revo Uninstaller and remove all residues that it found.  Then I took my PC to a Restore Point prior to my attempts to install my HP software.  Of course, I rebooted after the two actions.

  Then, I created a fresh Restore Point and then installed the drivers and the base software for my C4280.  It is installed without incident.  No more fatal errors.

  With fresh confidence, I installed the full package for my PSC 1410.  He hung up at the stage where he had to find the printer/scanner.  Knowing already that my PC could see the machine OK via the Device Manager, I replaced the printer USB cable but nothing better - the stage of the installation still does not see the machine.  So, I selected the option to connect the printer/scanner later and installation completely without more trouble.

  Finally, I tested printing on both machines and could do it without problem.  Then I tested with each scan and was pleasantly surprised to find that two scanned just as they should.  At this point, I have no additional problems in this regard.

  I don't know enough about what anyone to explain this sudden success but is not looking for any gift horse in the mouth and thus ends this request for assistance.  One respondent, I thank you a lot for your links.  You must me files downloaded from HP so I was not forced to work from the HP discs.

• Win 7 activation problem

  Location:

  I have a Win 7 license professional I received, University site Microsoft Dreamspark, a few years ago. I downloaded the ISO, he engraved on a DVD and installed using the license on a Toshiba Satellite laptop. Everything worked well until the end of last month, when I started having windows pop up stating that my copy of Windows was not authentic. A check with the Panel of the system said that, Yes, he thought that my license was not activated; an attempt to validate the license indicated again that the license was not valid... but then another control with system showed the small "Genuine Microsoft" blue badge was back, and the pop up went away... until a few days later, when she came back. And he went away again. And came back. And I called Support (or not) of Microsoft, who told me that the license key, I had was for Windows 7 Enterprise. It was more interesting, given that I had printed out my receipt to Dreamspark to PDF and was looking directly at the PDF file (which is how I knew what was the license key) and PDF certainly showed Windows 7 Professional, no business, and the System applet also shows Windows 7 Professional, Enterprise, not. Given that:

  1 it worked under Win 7 Pro for literally years

  2 I don't have the little thing to win 10 invite in the taskbar

  3 the problem doesn't appear when the small win 10 invite thingie would have been installed

  4 I have not changed my system, nor that I gave my license key

  I suspect that someone at Microsoft has upgraded all "volume license" licenses, including licenses Windows 7 Pro from Dreamspark for Win 7 Enterprise as part of the prospect of winning 10.

  How can I get Microsoft to admit that it is Windows 7 Pro, no Win 7 Ent? The Toshiba is an old L305 Satellite with 3 GB of RAM and will never become win 10. Never. I don't want to on this computer. I don't want to continue to be able to use Windows 7 without problem. It comes with Vista, and without any OS installation media, so it would be difficult to return to the expedition at this late date operating system. And I want to win 8 on this machine. And I'm not going to purchase a new license just because Microsoft screwed up and refuses to fix it. Assuming, that is, that I could get a Win 7 license at this late date.

  (1) the facility is NOT a volume - and no NOT business license.

  (2) it is completely authentic, but it's a fairly common problem.

  When was the last time you were able to update?

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• Homegroup and multiple user account problems

  I have been searching the net for information and can't find anything that matches.  I'm having all kinds of problems through the homegroup and multiple user accounts.

  I would like to know: when a machine (laptop in this case) is off the network, the individual user accounts will remain visible under homegroup?

  If they are not, then homegroup is not for me.

  UPDATE and closing:

  I confirmed that the individual accounts of the user on a machine that visible to another when this computer is connected to another group residential computer on a local network domestic.  Why they don't look just like a homegroup internally I don't get except that the machine would always be part of a group residential e.g. a laptop, as in my case, would be carrying a homegroup with it and not be able to jump on another residential group in a different location.

  What was causing me a lot of trouble has AVG Free.  Attention, the installation of AVG Free homegroup PCs cannot meet or is inconsistent at best.  My laptop would show the user accounts, but not the other homegroup PCs and both could indicate that there is no other available HG machine or sometimes invites you to create a homegroup.  It was a nightnare.

• Store and use the XP on Win 7 machine machine files.

  I want to transfer my files from my old computer with XP as its o/s on my latest machine who has Win 7 o/s. I think that the best way to get there without risk of damage to one of the files or programs on the latest system, is to create the space unallocated hard disk, partition, as well as a separate drive letter indicator. What I've done. I understand that I must format the new partition/volume, and the first and most obvious question I have is; is that correct? The other questions I have relate to Diskmanager posing questions about the formatting, and assuming that I have to format the volume, they are:

  1. The file system must be selected, NTFS would be correct?

  2.  Which Allocation size option should I choose. The files I transfer are mainly the .doc, .rtf, .pdf. XLS, jpg and they are not big, I was going to use as the default, but one may wonder, just in case where.

  3. Should I enable file and folder Compression? The space is not really a problem, but I guess it's always a good idea to keep it as compact as possible.

  I appreciate any advice on what I can get.

  Thank you

  Accept the default options to create a drive in the unallocated space - NTFS because it is more secure and more efficient especially if disk space on the drive is large, Allocation size default unit as this has been found to be the best mixed compromised usage.

  Using compression generates a performance as there is an additional phase of compression/decompression overhead when accessing files unless disk space is at a premium or are rarely access the data there is no point.

  Once you historical data on the second partition of drives, you have 2 options. You can add these additional locations to the affected library and just leave them where they are. Otherwise you need to access the files move them to the correct library to work on it. Eventually the second disc is a archive unused files.