Problems of connection attempts WIN 2000 machine to the net via wireless network

Similar Questions

• Connect to the printer via wireless network

  I have a hp photosmart 7760 connected to my main PC, which is connected to my home network.  This PC is Windows XP.  I just bought a new laptop running vista 64-bit.

  When I try to connect, it tells me that I have not install the correct driver.  I downloaded and installed the driver 64 bit vista from the internet, but it still does not work.

  What is work?     Now, I wonder if I need to install this driver on my main PC... and if yes, which ruin my ability to print from this PC?

  A big thank you to anyone who can help me.

  I tried the procedure described in the thread in my previous post and it works like a charm!

• I have problems to connect to Windows Live Mail on the Hotmail account.

  Connection window Live Mail Hotmail problems

  I have problems to connect to Windows Live Mail on the Hotmail account.  I was wondering if anyone knows if this requires a paid subscription to Hotmail.  Microsoft does not explain this.
  To configure the POP3/SMTP to Hotmail/MSN/Live.com access accounts in Windows Mail, use these settings:

  http://liveunplugged.spaces.live.com/blog/CNS! F92775FC46A390CA! 422.entry

  Make sure that all of your settings agree thereby. If you get an error message, do a right click on your error message, copy, then paste it into an answer here. We cannot do a lot of troubleshooting without the full error message.

   

  To give you a little history, Windows Mail does not support the HTTP messaging, which for a long time was the only authorized method of access for free Hotmail accounts. In addition, given that the development of Windows Mail was frozen in July 2006, there no knowledge that Microsoft has enabled POP access for free Hotmail/Live/MSN accounts in February 2009. Therefore, the Windows Mail Account Setup Wizard is hardcoded to reject the Hotmail and MSN addresses. To work around this limitation, when you enter your Hotmail/MSN email address, initially, use a fake domain, such as * address email is removed from the privacy *. After the account setup is complete, you can go back into the settings and correct your email address.

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "Joe Hartoe" has written in the new message: * e-mail address is removed from the privacy... *

  This is the mail of the window, it has been upgraded to manage Hotmail.  The error code indicates "connect to the mobile information server end." I came across this problem with Outlook Express similar years when Microsoft decided that Outlook cannot access Hotmail accounts on subscription.  Email client has no connection to Google problem.  Thank you

  Gary van, Microsoft MVP (Mail)

• Recently I connect to the net via hspa(3g) on windows 8 and try to download the apps store but stuck at 0% and if stucks to waiting for a break.

  I installed the Windows 8 32-bit operating system on my laptop.

  Recently I connect to the net via hspa(3g) on windows 8 and try to download the apps store but stuck at 0% and if stucks to waiting for a break.
  updates are available, when I install the updates, repeatedly paused at any time.
  I left it for download for hours, to no avail.
  I would like to say that my windows is activated and my laptop have win8 and double windows win7.
  I found the result in microsoft technical support by restarting the update through cmd, but in its service also not worked.
  Please help me in this topic, there are lots of apps in the store that I want to download but can not download.
  Please help................................................................
  Thanks in advance
  Original title: Apps are not download

  Hi imran,.

  I solve my problem of the post of the same problem. There is the correct method, i.e.
  By pressing win + w, then typing troubleshooting and choosing the troubleshooting in the windows updates.
  Then he fix something and fix my problem.
  Thnak you for taking interest in my problem.

• Unable to connect to the wired or wireless network.

  wireless network

  OK so my comcast Internet got off because my husband was laid off anyway so now my computer connecting to the tired all wireless network as power ang unplugimg cable everything is hanging Strip tight ideas?

  Hello

  1. are you trying to connect to the home or public network?
  2. what version of Windows are you using?
  3. you receive an error message trying to connect to the network?
  4. What is the brand and model of the computer?
  If you try to connect to the home network, contact the Internet service provider and make sure that the Internet service is activated.
  
  If you try to connect to the public network, try the following methods.
  Method 1:
  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Temporarily disable the security software.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• WRT610N: portable computers cannot connect to the 5 Ghz wireless network!

  Hello

  I have a Linksys WRT610N (material v1) router, and I have configured settings wireless for the range of 5 Ghz and 2.4 Ghz

  wireless network, but the problem is that my laptop (wifi compatible n) detects the 2.4 Ghz network, but is NOT the

  5 Ghz network.  I have no idea what the problem could be :-(

  Here is my setup :

  (5 Ghz) wireless network settings :

  network mode: only wireless-n

  network name (SSID): WRT610WiFi-N

  channel width: auto (20 or 40 Mhz)

  broad channel: auto (DFS)

  standard channel: auto (DFS)

  SSID broadcast: enabled

  (2.4 Ghz) wireless network settings :

  network mode: Wireless - g only

  network name (SSID): WRT610WiFi-G

  channel width: only 20 Mhz

  broad channel: auto

  standard channel: auto

  SSID broadcast: enabled

  Security on the two mode is 'WPA2-personal' and "WPA-TKIP or WPA2-AES" encryption

  But my laptop do the WRT610WiFi-G and not the other :-(

  Currently, I am a bit disappointed as you can understand, but I hope someone here can

  give me a solution for this problem...

  Best regards

  Chris.

  Fix. Should be a/b/g/n

• Cannot connect Win 7 Ultimate to my secure WPA2 wireless network

  Any suggestions for how to connect to a wireless network secure n.   Currently running Win 7 Ultimate 64 bit and cannot get the sysytem works correctly?

  Hello

  Maybe this can help
  

  There is an inherent Catch22 to attempt to repair a computer wireless through wireless. Given that the without wire is not connected to the source, there is no interaction between the wireless source and the Wireless Client and no frame of reference to find what works and what does not.

  As a first step, I will temporarily move the computer to a place close to the wireless router and plug with a wire.

  When he works with a wire, switch Off the Wireless Security in the router, disconnect the wire and try to make wireless work. This must be done when the computer is always close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• My dv7-4171 loses internet connection intermittently. This machine has the Atheros AR9285 adapter.

  I have Window 7 Home Premium 64-bit.  I use a router NETGEAR Wireless dual band but the same thing happens with other routers.  Other machines on the network have no connection problems.

  Sorry, that did not help.

  I understand your frustration. It is very aggravating to lose your connection, especially when you watch videos or download files.

  You can try to change the channel on your router.

  I like 1 or 11, me.

  Paul

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• HP Deskjet 3055A: connection Deskjet HP 3055 has to the University (eduroam) wifi network

  Hi, I tried to connect the printer with the wifi of the University network. But on the results of the diagnosis, it is said that more than one access point/router wireless was found which corresponds to wireless network (SSID). The results of the diagnosis, it says "no filtering" FAIL. And the IP address, configuration source are "not applicable".

  I can't even add "wireless printer" of the "control panel".

  Could someone help me solve the problem please?

  Kind regards

  Ze

  Hello

  First the first place you need to talk to is the it Department at your Uni. And secondly I would normally not connect my printer to this environment, I'm not asking people to use my printer. You can try to connect directly or use USB.

  http://WWW8.HP.com/au/en/ads/mobility/wireless-direct-printing.html

  Kind regards.

• Problem with access to the camera on the net via dsl modem and linksys router

  OK, I read all posts here on what to do in this case and think I have tried everything. I have an Actiontec dsl (verizon) and a v2 wrt110 router. I can see the camera locally, but not on the net. I had it hooked to another place but with cable service broadband with no problems.

  I think that the problem of my lie with ip addresses.

  Camera 192.168.0.115

  Router 192.168.0.1

  Modem 192.168.1.1

  The port forwards on the modem MUST be set to port forward to the IP Address of the Linksys router. It should be only the modem IP can see, so it's the only place you can move forward from the modem. What exactly is in this drop-down list in the config of the modem port forwarding?

  The problem is that there are two distinct here networks once you are inside your modem. There is a network between the modem and the router. Allthat is on it is the modem's ethernet interface and the port of the Internet router (or WAN). There is another network on the side the router as your PC's LAN, camera, etc. are on. All know the modem is how to get to the network to which it is directly connected to. While you could add a route staic on the modem to tell him how to get to this network, the modem must still know I have oprt route traffic to your camera to the router.

• Receive the message error "wireless network connection is not a valid ip configuration.

  Original title: unable to connect to wifi on windows 7 on Dell laptop

  Help!  I went on vacation and used my laptop to DVD play only.  I am now back home and cannot connect to the Internet.  I tried all sorts of resolutions without result.  When I use the Troubleshoot utility, it tells me to stop my router and turn it back on.  I've done this multilpe times at this point.  Once I keep in the resolution of the problems, I get the same message again and again: "wireless network connection is not a valid ip configuration.  I disabled McAfee and morning services.  I used the command prompt to reset WINSOCK, IPv4 and 6.  I turned power on and off wireless by using the key on the keyboard.  I disabled and enabled the network connection.  I have the driver-upated.  I know the router works properly from my iphone and iPad is all connected without problem.  I removed and added to the wireless network.  In the network and sharing Center (I would copy and paste the view up here, if I could, but since I can't get online...), it is said "unidentified network, no internet access" on the right side, and he also says that I'm connected to a public network.  There is no link to click for the public network and I can't seem to find a way to change it to the House (there are no options, no links).  I tried to solve this problem, after I get home from work every night and I'm so frustrated that nothing works.  Please, please help!

  Kristine,

  Please try these steps before replacing the adapters and let us know the results.

  1. To open a command prompt, click Start , and then type CMD in the programs and files.
  2. Right click on CMD.exe in the programs icon and select run as administrator.
  3. When the user account control pop up box, click Yes.
  4. At the command prompt, copy and paste (or type) the following command and then press ENTER:
     netsh int ip reset c:\resetlog.txt

     Note If you do not specify a path of the directory for the log file, use the following command:

     netsh int ip reset resetlog.txt
  5. Restart the computer.

  If the problem persists, go through the given suggestion't-have-valid-ip/62ca59b1-c173-4465-9153-554a13928315 http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wireless-network-connection-doesn

  Hope that these measures could help you.

• How to connect a Journe Air 801 picframe to a hidden wireless network?

  I want to connect my new Journe Air 801 picframe (model PA3701E-1ET2 number) to my WiFi network unencrypted with broadcast SSID disabled (network name is hidden).
  Is this feasible?

  I already [read the user guide | http://eu.computers.toshiba-europe.com/innovation/download_manuals.jsp |] [Download manuals] up and down and I tried to use the advanced wireless configuration menu but it seems that the device does not provide a way to enter the network name (SSID) and so cannot connect to my wireless network.

  I also [rechecked | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp |] Download drivers] if a firmware update is available, but there is none.

  I can't believe that such a simple device is missing from the device, but if this is the case, where can I ask a updated firmware updated with the ability to connect to Wi - Fi networks that do not broadcast the SSID?

  I searched on the [site Web from Toshiba | http://eu.computers.toshiba-europe.com/] but I have not found any e-mail or form to express my disappointment for the good service.

  Well, in this case, you will need to make the Wlan SSID visible.
  Then, you can connect to the WLan.
  After that, you could hide the SSID in the WLan router settings
  Maybe this way is possible