Store and use the XP on Win 7 machine machine files.

Similar Questions

• I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  You can use it only on a Win computer. If you had CS6, you could do a platform Exchange but not with CS5. Here are the details of the exchanges of the platform:

  Exchange a product for a different version of the language or platform

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

  I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

  I have the SSD and the caddy

  I need to:

  delete the original OEM HD

  Install the SSD

  install OEM HARD drive in secondary Bay

  Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

  or I have to

  delete this HD

  Install the SSD

  go into the BIOS, and then assign him drive in AHCI (etc.)

  Install Win 7

  install OEM HARD drive in secondary Bay

  etc.

  I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

  is this true?

  Pavilion dv7 - 6143cl

  I7

  8Gb

  Win7 (64)

  Thank you very much

  Hello:

  Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

  If so, you have an AHCI BIOS default.

  If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

  I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

  So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

  To install W7 on your SSD, check your own install of W7 disc.  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Can't answer your question on the dual boot as I never did before.

  Paul

• where to find and use the (HCL) hardware compatibility list for Windows xp3

  Original title: where to find and use the Windows (HCL) hardware compatibility list

  HCL for Windows xp3

  That does not "response" from MS Support Engineer Umesh was particularly useless.

  Unfortunately for you, the HCL XP (or Windows Catalog or Windows Marketplace or whatever it is renamed) no longer exists.  I guess Microsoft is not particularly interested in letting you know what the material is compatible with an operating system that is no longer, it sells and supports only.

  The trail begins here: "the latest Windows XP Hardware Compatibility List" (314062 KB) that leads to theWindows 7 Compatibility Center.  KB 314062 is also linked to the http://www.windowsmarketplace.com/ which used to have a list of compatible with XP hardware and software, but now redirects to the Microsoft store, another dead end that XP is concerned.

  If you really want to dig, your best bet is probably used the Wayback Machine (archive.org) looking for old copies of

  http://www.microsoft.com/whdc/hcl/default.mspx - but a lot of links are broken or "not supported" unless you use Internet Explorer 6 (the message claims 6 'or more' but 8 does not work).

• Used QUICK to collect files from the XP machine. Now cannot locate the data when you use Easy Transfer on Win 7 machine to restore settings

  I had XP SP3 on my computer and used the files and Settings Transfer Wizard to collect the data.  Recorded on another partition, formatted and installed Win 7 Pro.  Now, when you use Easy Transfer to restore data it tells me that it cannot find all the data.

  Any ideas?  Thank you!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• How to store and update the cache to the 2.3 OHC?

  We have a few dozen workflows (CPO 2.3 process) each triggered by a single event of the tide to start. Each workflow at the outbreak extracts digital data (two or three data double-digit like for example 15, 300) from one end of point plural web service and uses the same in its workflow logic. Data extracted from each workflow is usually specific to this workflow. We want the workflow to locally cached the data thus retrieved. Reason for caching data locally to the POC: the research of web service rate is 100 + searches per second and the web service cannot evolve beyond 100 searches per second. The data thus cached will be local to this workflow.

  QUESTIONS PLEASE:

  1. What is the best way to store the data of recovery? It uses local variables or global variables or other storage mechanisms?

  2. in case the so cached data be retrieved whenever the process (workflow) is restarted?

  3. when the data is changed in the web service, the web service can return fresh data to CPO to refresh the previously cached data. What is the best way to receive these data in order to refresh the cache local to the CPO while the worklfow is running and operating [(i.e.) without disturbing the running of the workflow state]?

  You will appreciate the detailed responses please avoid follow-up questions.

  Thanks in advance,

  Jamal

  If the data are really local to the workflow, use a range of process definition variable.

  But your options are extended definition process variables, variable global or service objectives.  Scope of the definition and global variables are almost the same, varying by what other workflows can see and set data.

• Can you use the settings in win 7 If you switch to xp?

  Win 7 for win xp

  Can you use the settings in win 7 If you switch to xp?

  Thank you guys so much... I don't really know my question... but with these answers that you have provided me, I think I know what to do!

  You never mentioned anything on dual boot Windows 7 and XP in your question, which mentioned the other contributor.

  If you consider the above here are easy to follow Guides.

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  SECOND OPTION

  When Windows 7 is installed first

  Warning

  • If you have a RAID configuration, you will need to have the XP RAID drivers for your specific motherboard on a floppy disk to select and load the F6 during the XP installation prompt .
  • If you have a SATA drive, then you will need to do one of the following options to load the drivers for XP SATA for your specific motherboard.
    • How to Slipstream SATA drivers in the installation CD of Windows XP with Dual Boot of Windows 7 or Vista
    • How to load the SATA drivers in the installation of Windows XP on your PC from Dual Boot with Vista or Windows 7 to find out how to load your SATA drivers from a floppy at the F6 prompt while installing XP.

  1. to create a new Partition on hard drive Windows 7
  NOTE: If you want to install XP on a separate internal hard drive instead, then skip this step and go to step 2.

  (A) in Windows 7, select and reduce the volume of Windows 7 in how disk management MB (1024 MB = 1 GB) you want to have the XP partition. (See screenshots below)
  NOTE: Would you do a method at this link.

  

  

  

  2. insert your XP installation disc, and then restart the computer and press any key to start from when you are prompted. (See screenshot below)
  NOTE: Ensure that the CD/DVD drive is selected first in the boot order in the BIOS.

  

  3 XP installation, press enter. (See screenshot below)

  Warning

  • If you have a RAID configuration, you will need to have the RAID of XP drivers for your specific motherboard on a floppy disk to select and load the F6 during the XP installation prompt .
  • If you have a SATA drive, then you will need to do one of the following options to load the SATA for XP drivers for your specific motherboard.
    • How to Slipstream SATA drivers in the installation CD of Windows XP with Dual Boot of Windows 7 or Vista
    • How to load the SATA drivers in the installation of Windows XP on your PC from Dual Boot with Vista or Windows 7 to find out how to load your SATA drivers from a floppy at the F6 prompt while installing XP.

  

  4. press F8. (See screenshot below)
  NOTE: On some multimedia keyboards you need to maybe press the F-Lock or key function before you press F8.

  

  5. select (step 1) partition or hard drive that you want to install XP on the help of the arrow keys and press ENTER.

  

  6 the installation of XP.

  Tip

  If you get the error loading operating system after XP is restarted:

  • Using your Windows 7 installation disc, start at the prompt at startup.
  • Type these commands below, and then press ENTER after each one.
    • Bootrec /FixMbr
    • Bootrec /FixBoot
    • Bootrec /RebuildBcd
  • Exit command prompt and restart the computer.
  • At this point, Windows 7 should start up in the same way before you try to install XP.
  • Go to step 8 below and run EasyBCD in Windows 7 instead.

  7 under XP, download and install .Net Framework 2.0 (32-bit) version or .Net Framework 2.0 (64-bit) version first and EasyBCD (free version) for your (x 86) 32-bit or 64-bit (x 86) XP.
  NOTE: In XP, Net Framework must be installed to run EasyBCD. Only 'free download for limited and non-commercial use downstairs' or 'Older Versions' to the right are free to EasyBCD. Registration is not required to download EasyBCD.

  8 run EasyBCD (free version).
  NOTE: This is necessary to fix the Windows 7 boot file and add to the list of Windows XP boot manager.

  9 on the left side of EasyBCD, click on the button Add a new entry . (See screenshot below)

  (A) in the upper part under operating system, click the Windows (see screenshot below)

  (B) to the right of Type, select Windows NT/2 k/XP/2 k 3 in the menu drop-down. (See screenshot below)

  
  WARNING: Don't forget to leave the box checked automatically detect the correct drive .

  (C) to the right of the name, you can leave the default value of Microsoft Windows XP under the name to display in the Windows Boot Manager, or you can type any name , you do not want to have instead. (See screenshot below)

  (D) click thedd entry has. (See screenshot below)

  

  10 on the left side of EasyBCD, click the Deployment of BCD , select (dot) the option install the bootloader of Windows Vista/7 on MBR and click Write MBR . (See screenshot below)

  

  11 closing EasyBCD.

  12 restart the computer to be able to boot from Microsoft Windows XP or Windows 7. (See screenshot below)

  

  Tip

  If Windows 7 does not start when selected, use the Windows 7 installation DVD to do a Startup Repair.

  That's it,

  See you soon.

• ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  Objective: move vmdk to store data with adequate storage and then increase storage D: 20G to 100G

  Converter is not available on this architecture. Can I migrate cold vm to the different data store, no prob.

  Question: Without use of the converter, method 3 can be used without a secondary vm? In other words, just by using target vm offline, online, offline? Or is it a problem of signing/OS disk on the Windows Virtual PC?

  I need to move vmdk in different LUN and extend drive vm windows on D: (non-OS drive). Is this possible via the single procedure? Options?

  To use method 3 to http://communities.vmware.com/thread/81121 requires available vm 'secondary', I did not.

  Method 3? Using of vmkfstools and another VM of Windows to extend a drive

  o stop the VM to resize

  o log in the console ESX Server via Putty

  o Type? vmkfstools? X & lt; new size of drive & gt; vmfs/volumes / & lt; storage volume name & gt;. / & lt; virtual server name & gt;. / & lt; the virtual disk name & gt;? That is to say. /vmfs/volumes/Storage1/my_vm.VMDK new disk size can be specified in kilo, mega, or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk of 20 GB of 24GO you would put 24000 m or 24g

  o the second virtual machine to help stop

  o change the second virtual machine settings and add the first virtual machine hard drive

  o power on the second VM and load the disk management snap-in and verify that the first virtual machine disk has unallocated on it space

  o select Start, run and enter diskpart.exe

  o the command? the list of volume? This will show you all the volumes.

  o select your volume based on the results of the list volume command, IE. ? Select volume 1?

  o type the command? extend? to extend the volume

  o check again the disk management snap-in and the volume is expected to be expanded with a greater ability

  o stop the second VM and remove (do not remove) the record of it

  o turn your first VM and the new space should be there and ready to use.

  Also, I'm already aware of Dell extpar:

  http://www.RTFM-ed.co.UK/?p=1310

  http://support.Dell.com/support/downloads/download.aspx?c=us & CS = 19 & l = in & s = DHS & ReleaseID = R64398 & formatcnt = 2 & starts = 83929

  for VI3, vmoiton of storage is made by RCLI plugin or a 3rd party

  I prefer the plugin

  http://www.virtualizationadmin.com/articles-tutorials/VMware-ESX-articles/VMotion-DRS-high-availability/storage-VMotion-SVMotion-VI-plugin.html

  In addition, if the option to increase the size of the disk in the VIC is grayed out, it sounds like a permissions issue.  Finally, you can not extend the disc using the VIC, if the customer in question has a snapshot.

• href="file://f://myfile.ext would not specify the hard drive and use the same directory as my html file.

  When you use href="file://f://myfile.ext' it will open fine in Firefox 3.6.8. However, I wish NOT hard code hard drive and use the location of the same player if my html file that calls this href link.
  I tried to use href="file:///myfile.ext" and it does not work. I get an error message saying file not found.
  For ie browser I can just specify href = "" / myfile.ext "and it works very well."
  This is a simple html file that refers to several local files and I have everything on a usb key (IE my F drive). The memory stick will be sent to several people and their USB can be another letter.

  I found a solution to my problem. Found I could just specify
  href = "MyFile.ext" and he will see when he's in the same directory as the html code containing the reference. " No need for extra slashes!

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• Can I connect my WiiU to my iMac and use the iMac is a screen to play games?

  Can I connect my WiiU to my iMac and use the iMac as a screen to play games WiiU on it?

  N °

• Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.

  Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either.  Can repair you.

  Hello
  Follow these instructions:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
  Brian

• Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Hi George,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope that helps!