homegroup is not ready yet message

Similar Questions

• Bluetooth is not ready - error message

  I currently have difficulties in a new Plantronics PT510 hands free head set with my laptop from a different manufacture of matching (I understand that this forum is a forum for Toshiba but thought because the BT adapter is Toshiba, it would be appropriate).

  The laptop runs Windows Vista Ultimate Edition. I have a Logitech bluetooth travel mouse and it works very well with the laptop.
  In Device Manager, it seems as if my Bluetooth adapter works OK. Bluetooth allows to detect the PT510 OK.
  When I try to enter the standard password '0000', Bluetooth comes up with "Bluetooth is not ready." I think I do all right but not joy. Driver Bluetooth is Toshiba, 09/08/2006, version 5.0.3308.0 - (seems a little old for me). I tried to update the driver using the function "update driver...". ', but Windows Vista says it's the most up to date driver.
  It can't be, can it?

  Please help: [email protected] or ph 07 3371 8777 during regular business hours, Qld, Australia. Reay Mackay.

  Do you use an external Bluetooth USB adapter or a built-in Bluetooth?

• When printing with elements 9 the epson 1400 says it's not ready, but I can print a document from aol on internet

  When printing from Elements 9 the Epson 1400 says it is not ready, yet it prints a document from the internet

  triple post

• Satellite Pro 440 CDT - message "the disk you selected is not ready."

  I have an old Satellite Pro 440 CDT with a CD drive (no floppy more) who plays the music well, but when I type and want to save to a cd, he comes up with the message "the disk you selected is not ready. Can anyone help, because really, I'm not an irritable type and need help.

  I know it as an irrelivent bits to your problem, but I suggest that you invest in a USB key. They are pretty well the replacement disks are much more portable than a CD.

• The device, \Device\Harddisk2\D, is not ready for access yet.

  Event Viewer has many entries of error ID 15, which States:
  The device, \Device\Harddisk2\D, is not ready for access yet.

  What does that mean?  Is this an indication of imminent drive failure?

  Hello

  ·         Did you of recent changes to the computer before the show?

  Method 1: Check that all connectors (power and IDE) should be firmly fixed. Disconnect and reconnect to check.

  Method 2: As short-term solution, try to shut down the system, turn the power off, turn on the power and restart. If the device still does not work then it is probably a problem of material, the device or card/main controller card (or possibly the cable connection) will need to be replaced. If the device seems to work then this indicates a problem of software or firmware. Do not forget that the problem can recur again unless the root causes addressed.

  Method 3: Update the latest version of the device driver (if there is one).
  Check on the Web site of the vendor for a newer driver and if it is available then load it.

  Reference: http://support.microsoft.com/kb/283658

  Method 4: Enforcement Procedure in Windows XP check disk errors

  http://support.Microsoft.com/kb/315265

  CHKDSK warning:

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• drive not ready message "the drive is not ready for use check the a drive, etc.".

  as soon as I connect my camera to transfer the photo I get following message

  The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

  I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

  Hello

  What is the number and the model of the computer?

  You have the computer floppy drive?

  Were there any changes made on the computer before the show?

  Follow the steps:

  Method 1:

  Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

  Method 2:

  Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Message error "printer is not ready."

  "I get a message" printer is not ready ' when printing 'Adobe PDF '. Changed many settings, without success. Occurs when you print from Internet Explorer, MS Outlook and MS Word. Any way to print a file in format PDF in Adobe Acrobat?

  Have you tried printing to the printer file. The result will be a PS file (probably with a PRN). Open the file in Distiller. If you do, then look for the AcroTray running in the background. It is a necessary part of the printing process, unless you like to take additional measures that I have just mentioned.

• Bluetooth is not ready

  Hello

  I've always used internal bluetooth on my Satellite 5100 201 without any problem (Windows XP SP2). But today I installed the new version of the bluetooth 3.20 stack (previous uninstall) and now the bluetooth device is not recognized. I see it in the list of devices not recognized by the SiW name and I am not able to install drivers for it. When I use the new installer, then he stops at one point (during the installation of the drivers).

  If I specify the option "I do not accept" (Microsoft certification) then he finished but the drivers are not yet installed. If I choose the option "I agree" (do not display messages on this certification) then it never ends. I tried to install the drivers manually (INFs) in the installation of packages, but it does not help. In this case, the Bluetooth manager complains that ' bluetooth device is not ready ".

  One thing is that beofore new bluetooth stack I installed battery bluetooth WIDCOM (not me, but mobile phone Installer). I uninstall, but maybe it's because this software evil I have this error. Install bluetooth drivers never ends.

  Maybe someone knows how can I install SiW bluetooth drivers. Thank you.

  Alex

  Hello

  Please check this page http://aps.toshiba-tro.de/bluetooth/pages/faq/bluetoothnotworking.html.

  The SiW entrance is unknown to me. Can you please write full name? Try to activate the Bluetooth card by using the FN + F8 key combination. As far as I know if the adapter is enabled, the operating system detects and it will be displayed in the Device Manager. At this time try to install newer Bluetooth stack.

  Tell us please what exactly happens.

• Bluetooth is not ready on Satellite P750

  I'm trying to combine a Bluetooth device on my p750 satellite and when I press on "new connection" in the Bluetooth settings I get a message "Bluetooth is not ready."
  I've activated Bluetooth with FN F8. In the Bluetooth wizard options, the Bluetooth is enabled.

  I see not a physical switch anywhere, which allows to disable the Bluetooth...

  Any advice?

  Toshiba computers laptops don t have physical switch to BT BT can be activated only with FN + F8.
  When you turn on BT for the first time the BT driver will be installed and all components of BT appears in Device Manager. Usually software stack Toshiba BT will start and taskbar (notification icons) you will see BT small symbol.

  Please check this box. If this symbol appears in red, then BT s device not ready for its use, but if the symbol is blue that you should be able to use the BT connection.

  I can't say for sure, but I guess you didn't activate BT correctly. Please try again.

• "Bluetooth is not ready", after a new installation on Qosmio X 770

  Hello

  I have a Qosmio x 770 and I was pretty stuped to uninstall the bluetooth drivers and then re install.
  When I re installed them I installed Atheros filter first then the bluetooth stack and now I get the error whenever I try to add a new connection that says "bluetooth is not ready".

  I beleve I have an Atheros driver and/or the card installed, but I don't know how to check.

  I use the bluetooth to connect PS3 controllers if that helps.

  If you need more information please ask and let me know how to get the information.

  Thanks in advance.

  Hello

  Do you have what Windows system installed on your laptop Qosmio X 770?
  I m request because the correct installation of the BT depends on the system you use.

  I also think that the ("bluetooth is not ready') message because Bluetooth has not been properly activated.
  Are you sure BT is has been activated?

  Your comments are greatly appreciated.

• Peripheral Bluetooth is not ready!

  I have a Qosmio G10 and have had this ongoing problem with the installation of bluetooth devices. Whenever I open Bluetooth and go to connect a device, it says "bluetooth is not ready." Help? Someone, please.

  Hello MB

  First of all, check if the Bluetooth module is installed on your device. If Yes, in the lower corner of your laptop, there must be Bluetooth label.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=96&service=EU&FID=tro000000189d

  If there is no label your device doesn't have Bluetooth, and it is a reason for this message that occurs.

  Good bye

• Satellite L850 "Bluetooth is not ready."

  Everytime I try to press "Add new connection" in the BT settings, I get the message saying that "Bluetooth is not ready." Not sure if that makes a difference, but the laptop has recently been repaired and I think that the motherboard and processor have been changed in the process.

  Someone knows how to solve?

  First question:
  If the laptop has been repaired, you still have the same parts inside the laptop?
  Maybe the WLan module has been changed that supported Bluetooth?
  Is the laptop supports Bluetooth?

  It should be noted all first!

  You can also see the list of Device Manager if BT is in the list.

  By the way: what system are you using and what L850-xxx you have exactly?

• Bluetoothis is not ready - Qosmio F750

  Hi all

  I only notice this problem recently with my Toshiba Qosmio laptop, in the past I was able to connect to my bluetooth very well (I use it to connect the controllers like a Wii remote). I left it for about a month or two without using it and the other day I went to use and got the error code "Bluetooth is not ready."

  I tried a lot of troubleshooting methods found on this site but I seem to be having much luck restore my bluetooth, so I thought that I ask here before I wreck something on my laptop.

  I have a:
  PC laptop Toshiba Qosmio F750
  Laptop
  Note: 5.9
  processor Intel® Core i7-2670QM CPU @ 2.20 GHz
  RAM: 8.00 GB
  System type: 64-bit operating system

  I have windows 7 and which was already installed on the computer when I bought it under a year previously. I also have an Atheros AR5B195 Bluetooth device, or so it is said in my laptop on a label. Here are some screenshots of my question, the first screen shot in a compilation of photos:

  http://i234.Photobucket.com/albums/ee262/jrich144/Untitled-6.PNG

  Squares:
  Red - me trying to connect a device and or remove a device but get "bluetooth is not ready" message
  Blue - trying in-between bluetooth support
  Yellow - option Bluetooth, bluetooth is turned on
  Green - Log viewer for BTHUSB, event ID 17

  http://i234.Photobucket.com/albums/ee262/jrich144/Untitled2-1.PNG

  Photo, Bluetooth RFBUS Device Manager (this device cannot start (code 10)).

  I tried to reinstall the bluetooth stack and the filters one or twice (not sure if they were good) I also tried a Microsft Quickfix, which ends up being not not compatiable with my system. Whenever I tried a new method I backed up my computer with a restore point system and if the method failed I reloaded my system restore to be if all point right back to square one.

  I would appreciate all help and if I need details more information please let me know. Thanks for your time.

  Hello

  Just at the beginning, I would like to know if you have enabled the BT ON using the FN + F8 key.

  I see the message: bluetooth is not ready
  So I guess it has not been selected by FN + F8

• Satellite A305 S6837 - Bluetooth is not ready

  Hello

  I'm not sure that I need an additional Bluetooth device for my computer laptop or not, but I used to have Bluetooth mentioned in Device Manager, after downloading the newest Bluetooth Stack but he disappeared and I wonder to connect my bluetooth device.

  I downloaded the new battery because I received the message "bluetooth is not ready" when you try to turn on bluetooth with the old version.

  Hello!

  You have Bluetooth activated with FN + F8 and switch wireless on the laptop (value on)?
  Check it!

  For latest Bluetooth driver, see Bluetooth Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  Good bye

• (Not ready) TosBtMng.exe during closing. Bluetooth cannot connect devices

  I noticed that my bluetooth stopped working recently. I can't connect or find near devices.
  I can not open bluetooth settings or any application bluetooth came with my laptop. I have a bluetooth module and everything built in.
  It was then that I noticed that whenever I tried to stop my laptop, one 'not answer' or 'not ready' message kept popping up to TosBtMng.exe.

  I tried to uninstall my previous bluetooth batteries and reinstalled the latest, but the same problem keeps occurring.
  TosBtMng.exe installation rail smoothly however, continues to be unresponsive.

  In Device Manager I see:

  + Bluetooth
  -Bluetooth RFBUS
  -Bluetooth RFCOMM
  -BluetoothRFHID
  -Bt-183 Bluetooth 2.0

  + Ports (COM & LPT)
  -BTPort (COM10 - COM14)
  -BTPort (COM20 - COM21)
  -BTPort (COM6)
  -BTPort (COM65)

  I understand that there should be something under system and USB devices, but I don't see anything else.

  I used ([http://support.microsoft.com/kb/315539/EN-US/ | http://support.microsoft.com/kb/315539/EN-US/]) this link to view non-connected devices and I see a whole bunch of phantom ports. I do not know how to connect these ports. I tried Bluetooth Com Local, but who does not work either.

  I read several posts on this forum about it, but I've not seen a solution. Maybe I missed something? If anyone knows of one, could you please direct me to this solution? Thank you!

  At first, I have to say that it will be interesting to know what Toshiba laptop you have and what operating system you are using. I assume you are using Windows XP Home edition. am I right about that?

  I use BT on my WXP preinstalled Satellite M70 nearly two years now and everything is working fine. If you can't get this to work using BT more recent battery maybe you need to reinstall your laptop using recovery media delivered.