(Not ready) TosBtMng.exe during closing. Bluetooth cannot connect devices
I noticed that my bluetooth stopped working recently. I can't connect or find near devices.
I can not open bluetooth settings or any application bluetooth came with my laptop. I have a bluetooth module and everything built in.
It was then that I noticed that whenever I tried to stop my laptop, one 'not answer' or 'not ready' message kept popping up to TosBtMng.exe.
I tried to uninstall my previous bluetooth batteries and reinstalled the latest, but the same problem keeps occurring.
TosBtMng.exe installation rail smoothly however, continues to be unresponsive.
In Device Manager I see:
+ Bluetooth
-Bluetooth RFBUS
-Bluetooth RFCOMM
-BluetoothRFHID
-Bt-183 Bluetooth 2.0
+ Ports (COM & LPT)
-BTPort (COM10 - COM14)
-BTPort (COM20 - COM21)
-BTPort (COM6)
-BTPort (COM65)
I understand that there should be something under system and USB devices, but I don't see anything else.
I used ([http://support.microsoft.com/kb/315539/EN-US/ | http://support.microsoft.com/kb/315539/EN-US/]) this link to view non-connected devices and I see a whole bunch of phantom ports. I do not know how to connect these ports. I tried Bluetooth Com Local, but who does not work either.
I read several posts on this forum about it, but I've not seen a solution. Maybe I missed something? If anyone knows of one, could you please direct me to this solution? Thank you!
At first, I have to say that it will be interesting to know what Toshiba laptop you have and what operating system you are using. I assume you are using Windows XP Home edition. am I right about that?
I use BT on my WXP preinstalled Satellite M70 nearly two years now and everything is working fine. If you can't get this to work using BT more recent battery maybe you need to reinstall your laptop using recovery media delivered.
Tags: Toshiba
Similar Questions
-
my Bluetooth cannot connect to my shoqbox
connection come with a pop-up alert indicating that "Audio driver is not available, please make sure that the audio device works properly.
Edit:
Re: my Bluetooth cannot connect to my shoqboxThanks for the reply. tried the methods you suggested but no luck. The pop alert is that when I try to connect my Philips Shoqbox Bluetooth speakers to my laptop. on its own my phone have no problem with the sound, it works very well. Just to tell you in my page of my Shoqbox Bluetooth device is associated.Hello
As the problem seems to occur only when you connect the Philips Shoqbox Bluetooth speaker to your laptop if you may need to install a driver for the same that is missing or a utility.
Contact Philips support so that they could help you with this problem.
It will be useful.
-
Satellite A660 - TosBtMng.exe - system error - Bluetooth does not
Hello
Not long bought my computer and just recently tried to connect my phone via blutooth.
However when I try to use the bluetooyh I can't start. I just get the error message' TosBtMng.exe - system error. The program cannot start because TosHdpAPI.dll is missing on your computer. Try reinstalling the program to fix the problem"
I tried uninstalling BT stack and downloaded the latest version on the Toshiba site, but nothing has changed.
Can anyone help?Thank you very much.
The installation has successfully completed?
Looks like something was not installed. -
Satellite T210-113 - Bluetooth cannot connect to Office communicator Mobile Windows
Hello!
For some reason that I can't connect my laptop Toshiba, which integrates the latest version of the Toshiba Bluetooth Stack and my Communicator with Windows Mobile 6.5
The devices seem to get paired impeccable, but there is a mistake, they can't connect whenever I try to connect to another. Any suggestions on how to connect my devices?
Moreover, the simple transfer of files between them works OK. It's when I'm trying to pair and connect devices I get this error
Hello
Here you can find a list of the different Bluetooth - how-to documents.
http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTOIs very interesting this HowTo:
+ How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.
http://APS2.toshiba-tro.de/KB0/HTD9602MY0000R01.htm -
6 iPhone bluetooth cannot find devices
Hello
I have an iphone 6, and when I turn the bluetooth it finds not all devices and is locked on the search for devices.
No idea how to solve this problem?
What types of devices are you looking for? Are you sure that these devices are in discovery/torque mode? Were you ever able to pair a Bluetooth device with the phone? This support document contains some troubleshooting steps for pairing Bluetooth devices. Set install and use third-party Bluetooth - Apple Support Accessories
-
L830 satellite - Bluetooth cannot connect after installing Win 7
I reinstall (Windows 7 Home Premium) on my laptop PSK84V-02400UAR Toshiba Satellite L830, and install all the drivers, but after you install all the drivers, I can't connect any Bluetooth device to this tour...
When I search using the Bluetooth window it shows in the search window and after a while ' * could not detect the remote device * ' *... Kindly help... awaitng your valuable response.
Can you please post exactly details how you installed the software and drivers Bluetooth?
I think that you have made some mistakes thereYour laptop supports the Atheros WLan card. Right?
I think that this Atheros WLan card compatible with BT as well. This means that you need to install a special driver that allows to share WLan and BT in a single module.This driver calls filter for Atheros Bluetooth driver package.
Therefore, install the driver Atheros Wlan, Atheros Bluetooth driver filter and battery Toshiba BT package.Then BT must be installed correctly and you should be able to activate it in order to start the pairing process.
-
Bluetooth cannot connect to wireless (MW600) headhones/microphone
I have a Sony Ericsson Bluetooth headset MW600 I want to use with my ThinkPad Yoga.
However, Yoga can not find them. He can find other Bluetooth devices (although they appear as 'not connected') and the helmet can be found by other devices.
What can I do?
20c003smd
FYI: The problem is that I did not erase the previous pairings in the MW600 - it wasn't a question of Yoga but a user :-)
-
Original title: Internet not working after installing Windows 8. Help, please
I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.
Manorajan respected,
I too had d same problem but I solved it later on myself.Here's how to: -.1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtmlDen DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed2 - unplug your LAN cable and Wi - Fi
3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel
4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "
"5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '
Press the properties button
6 - Select "use the following IP address:" option and set this ips
IP = "ip address".
subnet mask = 255.255.255.0
default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)
7. in the second section select "use the following DNS server address:"
Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan
-
HC-06 Module Bluetooth cannot connect to the computer
Hi, I had some problems with my HC-06 Bluetooth Module being unable to connect to my computer. I know that it sends a signal, as I could find on my cell phone, but I can't reach it using bluetooth on my computer. I tried to install Toshiba Bluetooth Stack but installation fails whenever I have try and now I am unable to access the default program Bluetooth in Windows 8.
This is the Bluetooth Module that I use (connected to an Arduino Dreamer): http://www.amazon.ca/gp/product/B00H07UJL6/ref=ox_ya_os_product_refresh_T1
And here is the exact specifications of my computer:
Processor APU A10 - 5750M AMD with graphics Radeon (TM) HD Manufacturer AMD Speed 2.5 GHz Number of cores 4 ID OF THE CENTRAL TREATMENT UNIT 178BFBFF00610F31 Family 15 Model 13 Step by step 1 Review Video card AMD Radeon HD 8650G Manufacturer ATI Chipset AMD Radeon HD 8650G Committed memory 768 MB Total memory 4. 0 GB Pixel Shader version 5.0 Vertex Shader version 5.0 Hardware T & L Yes Vendor ID 1002 Device ID 990B Plug-and-Play ID VEN_1002 & DEV_990B & SUBSYS_FA861179 & REV_00 Driver version 12.102.1.3000 Memory 7.4 GB Operating system Microsoft Windows 8 (build 9200), 64 - bit Service Pack 0 Size 64 bit Edition Base Version 6.2.9200 Regional settings 1009 BIOS 1.30 Version Insyde Corp. Manufacturer Insyde Corp.. Date Maximum display resolution 1600 x 900 Audio device 1 AMD High Definition Audio Device Driver version 8.0.0.8811 Audio device 2 Conexant HD SmartAudio Driver version 8.64.51.51 DVD TSSTcorp CDDVDW SU-208DB CD TSSTcorp CDDVDW SU-208DB By car Size 685,1 GB Free 566,3 GB Browsers Internet Explorer 10.0.9200.17054 Chrome 36.0.1985.143 Firefox Safari Software Java 7.0.670 Flash 14.0.0.176 DirectX 11.0 .NET 3.5.30729.4926 QuickTime Adobe PDF Reader 10.0.0.396 Hello
You will need to work with the support of the manufacturer of this device and resources of Toshiba. It's like
Adding a 3rd party radio or an air conditioner to a car and asking the gas and battery support
problems with them.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Problem reading SD card during and after the connected device?
I have an application that reads a file from the SD card when it is opened. Everything works fine until I plug the phone into my cradle/charger/USB. If I try to launch my app during the charge, the SD card is not reported to exist. I read that this may be a by-product of the USB mass storage Mode.
Worse still, when I unplug the device, I still cannot read the SD card in my application and it is considered to be non-existent.
What can I do about it? It is completely paralyze my app :/
Thank you for your time and your answers!
This has proved to be unrelated to the charge. I wasn't closing my InputStreams also I would get finally a FileIOException saying system resources.
-
I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.
But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop. He sees the connection, but still hung on authentication / "obtain an ip address" phase and sometimes loops around that. While this same cell phone is able to connect to wifi hosted on the laptop from my friend, via the same netsh command, also it connects fine to routers wireless etc.
I noticed that in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" has disappeared. I tried to run the command
"netsh wlan set hostednetwork mode = command not allow."
and then
"command netsh wlan set hostednetwork mode = allow."
but nothing is done, the virtual wifi adapter doesn't seem to be back. I've updated my drivers for wireless card that is "Intel Centrino Wireless - N 1030 BGN". But still no change, map of miniport does not return. Then I ran the cmd command "sfc/scannow", in the hope that maybe some file is corrupted and he could get fixed, but even after checking and restarting, it was still no effect on wifi.
So, basically, that is what is happening, I run the command
"netsh wlan set hostednetwork ssid = keyUsage htc = key command persist = mode abcdefgh = enable".
and it will
"Hosted network mode has been set to allow.
The SSID of the network hosted has been changed successfully.
The user key hosted network password has been changed successfully. »Then I run
"netsh wlan start hostednetwork.
and it will
"The hosted network began.
But in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" does not appear, instead when the connection is started, "Microsoft hosted virtual network adapter" appears and disappears when the hostednetwork is stopped. But nevertheless, no device is able to connect to this hostednetwork, stuck on authentication / phase "obtain an ip address", as a DHCP server is missing or something.
Kindly, help me out I searched on internet a solution for almost 2 days now, but nothing helped.
Abdoulaye.
Follow the links and check
http://social.technet.Microsoft.com/forums/en/w7itproui/thread/86ab166f-0d3d-4b9b-ad7f-4b840221ac33
http://www.SevenForums.com/network-sharing/14593-Microsoft-virtual-WiFi-miniport-adapter.html
http://helpdeskgeek.com/Windows-7/what-is-Microsoft-virtual-WiFi-miniport-adapter/
http://msdn.Microsoft.com/en-us/library/dd815252 (vs.85) .aspx
-
BT stack hungs TosBTMng.Exe file during shutdown
Hello
I'm running a FSC-Notebook that came with the BT-stack from Toshiba. The laptop is in W - XP, SP2, MCE, updated with patches of M$. I installed the 5.10.12 BT-stack. Shut Down the PC stops with a window that does not have TosBTMng.exe. (not ready) How can I fix?
I was trying to hunt for the error with SysMon from M$ and I saw that TosBTMng trying to access the registry keys that are not present. The installation was correct, error-free. Any ideas to keep this problem? Thank you
Post edited by: touchscreen
You use another software for ISDN example that uses a lot of virtual COM ports?
If so delete if you don't mind. Install the bluetooth software and reinstall your other software.
Take a look at the screenshot DeviceManager to the following Web site to see how the Bluetooth COM ports should resemble:
http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/FAQ/bluetoothnotworking.html -
Bluetooth is not ready on Satellite P750
I'm trying to combine a Bluetooth device on my p750 satellite and when I press on "new connection" in the Bluetooth settings I get a message "Bluetooth is not ready."
I've activated Bluetooth with FN F8. In the Bluetooth wizard options, the Bluetooth is enabled.I see not a physical switch anywhere, which allows to disable the Bluetooth...
Any advice?
Toshiba computers laptops don t have physical switch to BT BT can be activated only with FN + F8.
When you turn on BT for the first time the BT driver will be installed and all components of BT appears in Device Manager. Usually software stack Toshiba BT will start and taskbar (notification icons) you will see BT small symbol.Please check this box. If this symbol appears in red, then BT s device not ready for its use, but if the symbol is blue that you should be able to use the BT connection.
I can't say for sure, but I guess you didn't activate BT correctly. Please try again.
-
Satellite A305 S6837 - Bluetooth is not ready
Hello
I'm not sure that I need an additional Bluetooth device for my computer laptop or not, but I used to have Bluetooth mentioned in Device Manager, after downloading the newest Bluetooth Stack but he disappeared and I wonder to connect my bluetooth device.
I downloaded the new battery because I received the message "bluetooth is not ready" when you try to turn on bluetooth with the old version.
Hello!
You have Bluetooth activated with FN + F8 and switch wireless on the laptop (value on)?
Check it!For latest Bluetooth driver, see Bluetooth Portal:
http://APS2.toshiba-tro.de/Bluetooth/Good bye
-
WiFi 'cannot connect to this network.
I recently bought a HP Pavilion 17-e049wm Walmart and since I started for the first time that there was this consistent issue; It does not connect to my home network, and if so, it disconnects within an hour and if I try to connect it says "unable to connect to this network. I am sure that the issue is not the cause of the wifi it works properly on any laptop in the House, as well as on all mobile devices. I even made sure the power management settings have been disabled and I checked all my drivers and they are all up to date. I noticed also recently the wifi indicator (white light on my hp) to become orange (airplane mode indicator) just before it says unable to connect to this network and then return whitens. I turned both low roaming if that matters. This laptop comes with windows 8, and as I mentioned previously, I checked all the drivers, so it can't be a hardware problem right? And if this isn't a problem with windows, so is there some special configuration needed for wifi networks to connect to a windows computer 8? Cause I read somewhere that the WEP keys are not supported and home my network security is WPA2-PSK. If I restart the computer, it connects fine but then the same thing happens again. The longest, it worked for 2-3 hours. Could also have something to do with the fact that wifi falls a lot? The other day because the windows 8 and our computer laptop windows 7 were running side by side and when the Internet has dropped, the windows 7 laptop then would say not access windows 8 would still display cannot connect to this network. And the strange thing is, every time the Internet drops on laptops, it works great on mobile devices like my iPod and the nexus 7. Now, I hope it's just a problem with wifi and that computers are just very sensitive to that particular network, but I don't know if there is a real physical problem with my laptop. It's the sixth day, I got it so if there is a problem I'm ready to go back but I don't know about you. So to sum up, given all of the above information, is the problem with the laptop, windows 8 or wifi? And in whatever the bat injured, how can it be solved?
Thank youP.S. There are moments where the wifi works fine on other laptops, but the problem 'Unable to connect to this network' has not changed on the laptop to windows 8PPS there aren't any other portable windows 8 in the HouseHello
Check this box:
http://mhotspot.com/blog/solution-for-cant-connect-to-WiFi-network-on-Windows-8-after-disconnecting/
Maybe you are looking for
-
Satellite P300 - questions of recognition of load and battery
I have two laptops P300, a PSPCCA-0C502H and a PSPCCA-05Y01Y. One had a hard life and the battery is dead. It was still used for a long time after that, while being connected at all times. The 05Y01Y was mine and the battery eventually would last onl
-
There were no updates/changes/restores on my machine recently. I wanted to move the files I've created - and saved directly to an external hard drive - since the external hard drive and My Documents on my laptop. All right up until the last few files
-
I want to use Dbase III Plus on Win 7
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: I want to run Dbase III plus on Windows7. Does anyone know how? You have problems with programs Error messages Recent changes to your co
-
Is it possible to edit, or to delete, a misspelled word.
-
EN is not pulling Supporting detail
HelloFor some reason, the FR is not showing in the report support detail.I have a connection planning, enabled 'View supporting Detail' for row in FR. I can see the detail of support in the form of planning data. But in FR, it does not show.Kind rega