Homegroup Windows 7 there is no homegroup on the network - various solutions already tempted

Similar Questions

• When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

  When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file. What should I do?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• My Windows 7 PC cannot see themselves on the network.

  My Windows 7 PC cannot see themselves on the network. Under the heading network in Windows Explorer when I try to extend the C drive, I get an error message saying that Windows cannot access it. Also, I can't access this PC from a PC in 10 Windows on the same network - this error message indicates that Windows cannot communicate with the device or resource. It is available, but it is unresponsive to attempts to connect.

  I have tried turning the firewall off temporarily, but this makes no difference.

  Can access my PC Windows 7 Windows 10 PC and a laptop Windows 7 without any problem.

  Integrated network diagnostics do not come to the top with something useful.

  OT:

  Windows 7 networking

  Hello

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  There could be several reasons for this cause and to diagnose the problem, we can try the following steps and check.

  Step 1: Check if the network discovery is turned on.

  Please refer to: enable or disable network discovery

  Step 2: Check Event Viewer for detailed information on the problem. Consult the following links.

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Step 3: Search the computer browser service, if it is running.

  1. click on Start, type services.msc in the start search.

  2. search for the computer browser service.

  3. right click on the computer browser service and select Properties. Check if it is started.

  4. If it is stopped, select Start or restart. Make sure that the service is started and set as Automatic.

  5. click apply and OK, if you make any changes.

  Step 4: Temporarily try to disable the antivirus on the computer program and check if the problem persists. If you are able to connect, you may need to check for updates and firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Step 5: Make sure that the name of the network working group is the same for all computers. Also try disabling some protected sharing and check for the issue.

  1. Open advanced sharing settings by clicking theStart button, thenControl Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2 click to expand the current network profile.

  3. by password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, try to perform a SFC scan to see if it solves the problem. Read the following article.

  Use the System File Checker tool to repair missing or corrupted system files

  Also refer to:

  Networking of computers running different versions of Windows

  Why can't I connect to other computers?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• "Double Windows error-a system name exists on the network."

  Whenever I start the computer, the following message appears: "Error in window system - a duplicate name exists on the network."  I have studied this problem and the advice I found said I should rename my computer.  I done it twice - the problem persists.  "Quick Fix" links or ideas would be appreciated.  I'm using Windows XP (NOT for Vista).  Thanks in advance for your help.

  No, the router could not be the cause. How many computers do you have on the network? What are their names? Don't worry, I'm not laughing. My own computers have funny names such as Blackadder, Taliesin and James to name a few. ;-) MS - MVP - Elephant Boy computers - don't panic!

• Windows Vista - there is no disc in the player - problem

  I have Windows Vista Home Premium 64-bit and for some time I get this message at startup - "there is no disk in the drive. Insert a disk in the drive\device\harddisk2\dr2'. I can make the message disappear by cancellation or put a cd in drive E - my DVD player. Is it possible to fix this? Thank you very much.

  Pete.

  Hi PeterLoaring,

  Please see the following thread similar with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/svhostprocexe-no-diskthere-is-no-disk-in-the-drive/c3d169bb-eb6d-4FA3-aeb5-a74ec68afd05

  I hope this helps!

• I installed CA secruity suite yesterday and evertime I try to open it, I get a pop up of microsft windows saying there was a problem and the program closes

  Yesterday I installed Security Suite CA.  It installs and everything indicates that it works correctly, but when I try to open a pop-up appears microsoft Windows telling me a pproblem occurred and the program stops, and then another pop up appears saying program closed and they send me a solution if there is

  Here are the codes I found impossible to repair... files should I copy the whole report or is it enough to make me help with this question?
  POQ 76 ends.
  2011-04-03 07:55:23, Info CSI 0000018e [SR] full Verify
  2011-04-03 07:55:23, CSI 0000018f [SR] components Info check 100 (0 x 00000064)
  2011-04-03 07:55:23, transaction Info CSI 00000190 [SR] beginning verify and repair
  2011-04-03 07:55:35, Info CSI 00000191 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:35, Info CSI 00000192 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, info CSI 00000193 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:39, info CSI 00000194 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, Info CSI 00000195 [SR] this element is referenced by [l:158

  "{79]" Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR.

  Hello

  ·         This software provided by the ISP (Internet Service Provider)?

   

  Method 1:

  I suggest you to refer to the link provided below to uninstall and reinstall CA security.

  Step 1:

  To uninstall a program in Windows Vista see the link below.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

   

  Step 2:

  Once you uninstall the program reinstall to install a program under Windows Vista refer to the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Method 2:

  You can also contact the CA Technologies team for available updates or patches to fix the problem.

  http://shop.ca.com/ca/support/freeis.asp

• Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

  There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted audio driver or settings.

  I suggest you run this Microsoft fixit and verify.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

  To uninstall the driver, please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

  b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

  c. restart the computer.

  Now, reinstall the drivers from the computer manufacturer's website and check the.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Conflicts of addsess IP in Windows 7, error "There is another device on the network with the same IP address".

  Conflicts of addsess title: original win 7 IP

  I just bought a used laptop, it has been deleted I made it mine I addminastrater pc name willards pc and whatnot, but I continue banging off the internet because address conflict IP said that there is a nother design on network with my address, I don't know how fix it can you please help me?

  Hi Willard,

  Please contact Microsoft Community. I've surely you will help solve this problem.

  This problem could occur due to incorrect parameters TCP\IP.

  Try the steps listed here:

  Method 1:

  I suggest you to reset TCP\IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  https://support.Microsoft.com/en-us/KB/299357

  Method 2:
  If the problem persists, I suggest you try the following steps to flush the DNS and request a new IP address of the server of your ISP. Check if it helps.

  1. Cclick on Start and type cmd in start search.
  2. Right click on command prompt run , then selectas administrator.
  3. At the command prompt, type the following commands and press enter after each command.

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  output

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Computer Windows Vista says it is connected to the network 4. I don't know what is network 4.

  on the bottem of my screen where the icons were similar to the he mcfee icon and symbol of volume there is a picture of 2 small computer screens, and when I scroll above him, it says connected to the network 4. I don't know what network 4 is and I have never seen this before and the other day I saw him and it says connected to network 2. I would like to know if anyone can help me in this matter. What network average 4?

  original title: bottem icon

  This icon is the icon of your network. You don't say what kind of network you are using. However, I will give you an example. If you repeat your network connection or use a network USB key and plug the key to another USB socket and create a new Windows login will name each new connection 4 then 2 then 3 and so on. You can rename the connection to your liking. To rename the link to right click on the network icon in the notification bar, click Network and sharing Center, click on manage network connections, right-click your network connection icon and click Rename.

• Why are there two routers listed in the Network Infrastructure?

  I have a Linksys WRT54G2 router, but sometimes when I look at my network in the control panel it shows an extra router, that router ghost appears in the title of the Network Infrastructure. It's a WRT160N. Sometimes it's there, sometimes it isn't.

  I have Windows 7.

  Why this is part of my network? Should I be worried? How can I stop it arise?

  Here is a screenshot of the problem:

  http://www.imagebam.com/image/57195f124702831

  Hey DavidVX,

  I found a few other similar topics you can check below:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unknown-router-in-network-infrastructure/40ff8817-1d3b-4c1c-b38a-013884220d1a
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/extra-router-showing-up-in-network-infrastructure/34a7d2d7-1498-43C9-ACEC-2bc8a7087613
  On a thread, the user was able to match the MAC address of the window of the Network Infrastructure to an open wireless network (unprotected) nearby. This seems to be the case for multiple threads, I found elsewhere on the internet.
  Given that I have found so many other similar threads on the same issue, I would consider it is safe and I would just ignore it.
  If I find a solution to them, I'll let you know!

• HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

  I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
  
  When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
  
  I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.

  Hello:

  The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.

  The 2nd driver on the list is W10 x 64.

  https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10

• Windows XP sees Win 7 computers on the network, but not Windows XP-based computers (7 can see 7, but 7 can't see XP and XP cannont see XP)

  We just installed a new Netgear Prosafe 16 port switch.  We use a wired Linksys router.

  With 10 computers on the network, XP can't see XP or 7.  And sees only 7 other 7 computers.

  We are able to ping to all computers.  All computers have access to the Internet.

  Network neighborhood shows computers only 7 to 7.  XP doesn't show anything.

  Error message:

  "The Working Group is not accessible.  Migh Tnot you are allowed to use this network resource.  Contact the administrator of this server to find out if you have access permissions. »

  "The network path is not found."

  Thank you!

  Hello

  -Are you connected to a domain network or a home network?

  Please follow the steps below and we update with the results.

  Method 1: Error Message When you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  Please follow the steps described in the following article and check if it helps.

  http://support.Microsoft.com/kb/913628

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Method 2: Error Message When you try to access a network share on a Windows XP-based computer: "workgroup is not accessible.

  http://support.Microsoft.com/kb/915107

  For more information, see the articles:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know if it helps!

• OfficeJet pro 8600 + scan if there is no configuration for the network folder

  The printer is wireless to my router and I connect to a computer connected to the router with an ethernet cable.  The computer is running Windows 7SP1 Home Premium 64.

  During the original installation of the printer 3 days ago, I used the wizard set up 'scan to a network folder' a record 'scans public '.  He created the 'profile' correctly and worked well the first time I scanned (I scanned the 3 or 4 times with different tweaks to experiment).  However the next day it no longer worked error on the printer was, 'could not connect to \\Computername\Public scan. Check that the remote computer is on. "Obviously, the computer was on, some communication problems only happened from one day to the next day, he was sitting unattended.  Hmmmmm.  Note that the option "Scan to Computer" works very well, so communication is simply no "scan to network folder" option and I really want to scan to a network folder.

  I went in a private "Scans" folder on my account and created a share as 'DadsScans', creating permissions and following all the tips I've come across so far.  Then I tried many times with the wizard to create a new configuration in the profile and all have failed and yes I found the network and turned on file sharing.  Also remember that it worked fine the first night?

  I tried to enter the local path to the folder (C:\users\dad\My analysis) with a share name (DadsScans), but the error message after choosing the option "test and save" was, "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Setting is not saved. »

  I then tried to enter the share name directly in the path of the network folder, like "\\computername\DadsScans", but the error was "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Make sure that network discovery and file sharing are turned on... "Note, I also tried,"\\computer Address\DadsScans IP"and got the same error.

  Finally, I disabled my firewall and my anti-virus in real time and tried again and got the same error messages.

  Once again, my network discovery and file sharing are on and it worked fine the first time I've used suggesting that everything was fine.  What happened during the night, so that the printer and computer sitting idle?  I've changed NOTHING!  Any suggestions would be greatly appreciated!

  Well well, after several hours of attempts to solve the problem, the 'light bulb went on!  The night after that I configured the "scan to network folder" option, we had some difficulties with our network so I reset our modem and DSL router.  Who cleaned the problems of network with devices.  It is apparently broke something with the communications between the scanner and the computer.  A simple re-start the computer tonight and wa - la, the original public scan I configure worked again and I could create new profiles of "scanning to '!

• Get a machine w / Windows Server 2012 R2 accessible Foundation on the network

  Everyone,

  I configured correctly (I think) a new computer that is running Windows Server 2012 R2 Foundation.  I would like to

  understand and carry out the steps or a link that will tell me how to make this machine available on the network.  The server is

  on a LAN connection and everyone in the office should be able to go in Solution Explorer and see the machine in network.  They

  currently impossible.

  Once they can see and double-click it, then the dialog box should come and ask for credentials.  I have the user ID

  and the password in place.  I just need to be able to get on the server.  Can someone, please, please help me go beyond this challenge?
  Thanks in advance.

  Jerry

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home