Horizon 6.0 HTML Blast connection through an A10 load balancer?

Similar Questions

• See the connection to the server, load balancer & physical workstations

  We deploy a VMWare view environment and we use a combination of physical and virtual desktops.

  When install us the Agent to view physical workstations with the /V "VDM_VC_MANAGED_Agent = 0" settings. " This allows to specify the Server Manager to view to record the workstation during installation.

  So far we've just been specifying a connection view servers and everything was fine. But now we are getting our deployment and we want to ensure that we have the appropriate redundancy built in.

  If the server connection view that physical workstation is registered during installation fails, is grave view agent automatically knows to start watching one of the replica servers?

  If it isn't... We are keen to implement a load balancer between the workstations phyiscal on connection view servers. Are there problems with it?

  I found many articles balancer redundancy and load for VMWare View, but none don't talk specifically a load balancer between physical work stations with the agent of the view and connection servers.

  Take a look in the registry on the physical Machine, he must list all available connection brokers it.

  Linjo

• Strange behavior of HTML/Blast - ideas?

  I have a strange problem with a Horizon view 6 implementation. I have a pool of office automated using linked clones and dedicated user assignment. The problem is that none of my users can connect to these desktops via HTML/Blast UNLESS the Bureau has already accessed via the customer view and PCoIP. As soon as I connected to one of the desktop computers in the pool through the Client view, disconnect and then try to connect via HTML/Blast, everything works perfectly!

  The events I see when a user who has never connected to the pool first of all through the view Client tries to connect via HTML/Blast, in that order, are the following:

  23:32:29 (agent) agent that runs on the DESKTOP computer has agreed a session allocated for user domain\username

  23:32:29 (connect to server) user domain\user requested windows7_pool pool

  23:32:29 (connect to server) user domain\user asked windows7_pool pool, allocated matchine DESKTOP

  23:33:54 (connect to server) User DOMAIN\username logged off

  No error or anything - looks perfect except the Quick disconnect (who did not perform).

  Client side, the screen looks just like it would if the Office was about to appear, but then after about 1.5 minutes, goes to a white screen with the following error:

  Year error has occurred: {"code": "ETIMEDOUT", "errno": "ETIMEDOUT', 'syscall': 'connect'}

  This behavior occurs if the inside the firewall and outside the firewall. And when the same user logs in via PCoIP using the customer to see once, HTML/Blast links start working later and never fail again. I ' sure Machines are always powered on "defined on the pool, and connections through PCoIP arrive quickly. I can't seem to find a value for a threshold low timeout anywhere, but I'm new to this configuration.

  Any ideas what could cause this type of behavior?

  I got this job.

  Given that the only common denominator to the question seemed to be the image of the desktop, I started there.

  I created a new snapshot after making the following: removal of the view Agent and Direct Connect software, then turn off the Windows Firewall and reinstall both. I also chose to not NOT the Windows Firewall is automatically updated by the Direct Connect installation software on reinstall it. Installation initial (partially work), I followed the recommended practice to have the firewall and allowing the installer to modify the Firewall automatically.

  Once I had the snapshot of the office now with no Windows Firewall, I recomposed the pool and all HTML/Blast following connections to this pool has worked flawlessly every time.

• Pouvez individual emails to group TB that are connected through answers?

  Is there a setting for the connection or group individual email who is a connected through answers. Outlook (used to work) has this feature and I really like it. Any new e-mail associated with the original is added to the title of the original, by eliminating a long list of separate emails over the place.

  View menu > sort by > threaded

• I can't connect to internet, I get a message "can not connect to the proxy server. My firefox does not connect, I can connect through aol.

  Unable to connect to the internet through firefox, can connect through aol, firefox was conneting before, now I get "cannot connect to the proxy setting.

  • Press F10, or press the Alt key to bring up the 'Menu Bar' temporarily if the menu bar is hidden.
  • Use "Firefox > Options" instead of "tools > Options" If the menu bar is hidden.

• R8500 disorder connect through C1100Z modem (Qwest)

  I'm having difficulties to keep the connection or sometimes even to make connection through my modem. (the modem) works on its own, but I bought this router on Ebay non-recorded. Any help appreciated.

  Finally had time to try this, I went all the way to clone the mac address of the cpu and well. Thank you

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  On Friday, June 8, 2012 14:45:42 + 0000, Ian 213 wrote:

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Your router provides firewall protection, so the need is not the same
  as if you had no a router. There are some who say you need to no.
  all firewall software.

  But my opinion is that you would be a lot safer if you have run a
  router software, and since there is little reason not to, I
  recommend that you do.

  Ken Blake, Microsoft MVP

  I agree.

  @OP Windows XP (SP2 and above), Vista, 7 and 8 all have active firewall software by default.

  There is no need of any 3rd party firewall.

  Some users like running programs such as ZoneAlarm because it warns him from the processes that use the network, and then there is the possibility to deny/allow it on the spot, or deny/allow forever. There may be slight discomfort in the installation, but once it's for all your programs, and then it really can work in silent mode.

  Microsoft Firewall simply leave everything default, but they can be configured manually to block anything outgoing or incoming.

• WindowsMail does not connect through to gmail

  My windows mail email is not connectingthru to my gmail. When I presssend & receive a box comesup askingfor my name of user & p'word, but when I put it thiscomesup: account: 'pop.gmail.com', server: 'pop.gmail.com', Protocol: POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92. As a senior, PLS help me to get it reconnected > Ihave reset the p'word propertiesand gmai but nothingseems to connect through. Thank you and pls help as I am really frustrated

  This Gmail account has already worked in WinMail?
   
  Activation of POP in your Gmail account
  http://mail.Google.com/support/bin/answer.py?answer=13273
   
  How to configure gmail in Windows Mail & Windows Live Mail
  http://mail.Google.com/support/bin/answer.py?answer=86383

• Allow other users to connect through my internet connection of mobile phones.

  Quite simply, I'm setting up my xbox live to run through my internet connection of mobile.

  When I select the check box to allow other users of the network to connect through this computer's internet connection it turns off immediately, so is not enabled.

  I tried disabling the firewall etc to see if it limited the ability of sharing, but it did not work.

  Any information or help would be greatly appreciated.

  Hi Stewart,
   
  Please go through the article below which will help you to connect to windows live using your internet connection for your laptop.
  How to connect your Xbox 360 wired controller to a computer running Windows
  http://support.Microsoft.com/kb/906347

  Please also see the link below. This could help you.
  http://support.Microsoft.com/kb/978618

  If the problem persists, I suggest that question you post you to Xbox forums.
  Xbox support

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  http://www.Xbox.com/en-us/forums
   

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• get internet connection through another computer...

  Hello

  I would go straight to the point :)

  I have a desktop running windows vista. I have a normal internet connection through a router that connects to the internet on this desktop computer.

  now, I also have a laptop with windows xp and here is what I do. my laptop's wireless was always bothers me, sometimes it connects, sometimes it doesn't work out... so I saw that there is an Ethernet card installed in the laptop with an Ethernet port.

  My question is this:

  I have a lot of Ethernet cables at home and I was wondering if there is a way to get internet to my laptop via the Ethernet port on my desktop, but without needing the desktop computer to be running, cause I only use my laptop these days and my router is too far to connect from my room. I hope you understand my problem. In theory, I think it's possible to do, but I'm not sure how, so please help me on this one. my laptop also has firewire, but I prefer ethernet for some reason any.

  Thank you

  Hello

  Sorry, but you cannot get a connection via another computer if the computer is off.

  I'm not sure that I understand completely the topology.  However, if the office is connected by cable to a router for Internet connection, you can solve the problem by buying a simple network switch.

  You take the cable from the desktop and connect to the switch. Then you plug the desktop and laptop computer at the switch.

  That this switch network does, it divides a cable to feed many computers.

  Example of a switch that can be connected with a cable to a router and feed 5 computers.

  http://www.Newegg.com/product/product.aspx?item=N82E16833166034-

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• If my desktop pc is connected through CATV cable, I use the wireless connection?

  We have a router that connects two laptop computers, a smart phone and smart TV, a Kindle reader and a printer.

  I want to know is so that desktop shows a "wireless network connection", I actually use this connection if this computer is connected through a CATV cable? Specifically, if I disconnect in that regard, maybe would I win any speed for this computer or laptop computers that are located in different parts of the House?

  And if so, how can I fix it so that it does not automatically each time connect that I boot?

  Thanks for your advice.

  It seems to me that you have a wireless router with many connected devices, including a desktop PC, and you want to know if forcing the PC being used a wired connection to the router, instead of a wireless connection, will increase speed or ease of use for one of your devices?

  Short answer, probably yes, and it should not hurt anything.

  Wireless network connections are all just more finicky than the wired connections. Without knowing the details of your router, I can't do any insurance policy, but reducing the pressure on your wireless radio components and its replacement by the PC with a wireless connection wired should not hurt anything and could help.

  I guess CATV here means a type of wired network cable CAT-5 cable? If it's just a "CAT 5" cable, he'll only go 100 Mbps, which might be slower than your wireless router. However, 100 Mbps is probably faster than your internet connection at home (your speed of the router to the outside world), so it should be good. If it's a "CAT-5e" cable, so no problem.

  To disable your wireless connection on the PC, go to control panel-> Device Manager command. You will get a window with a list of all the hardware devices on your computer, listed by category. A category must be "Network adapters" or something similar. Expand this category by clicking on it and find your wireless card (something something Wifi or wireless network card). Right-click, and then click on disable. Now your computer will be able to connect with the wired connection. When you want to cancel the process, simply repeat these steps and you will find that 'Disable' has been replaced with the option 'enable '.

• Is it enough for connection through SSH-2 RSA only, 1024, force 8 password?

  Hello world

  I provide the highest level of security on C2821-CCME-VSEC/K9.   Is it sufficient for connection through SSH-2 RSA only, 1024, force password: 8 symbols, no. CAPS letters, numbers, special symbols, example of password [homeless ^ & * 89]?

  line vty 0 4

  exec-timeout 60 0

  entry ssh transport

  line vty 5 15

  entry ssh transport

  I should create MAC based Access-List on cisco router?

  Should I use connection with higher security level options: SSH-2 RSA only, 2048, force password: XX symbols, CAPS and small letters, numbers, special symbols, example of password [homeless ^ & * 89Ad @[email protected]/ * / & #]?

  It's paranoia that has nothing to do with real life, or is a recommended practice?

  Please, advice.  Thank you very much.

  for extra protection

  I do it

  access-list 23 allow any newspaper

  line vty 0 4

  access-class 23 in

  line vty 5 15

  access-class 23 in

  Journal connection failure

  Connection on the success journal

  This will be syslog all connection attempts

  Archives

  The config log

  Enable logging

  hidekeys

  This will be syslog all comands

  
  

  SSH itself can be easily decoded when the man in the middle attack

• I can't confirm my new pc as my trusted pc. I am told to confirm by connecting through my old reliable pc. Error: "you cannot add a reliable PC now."

  original title: cannot confirm reliable pc

  I can't confirm my new pc as my trusted pc. I am told to confirm by connecting through my old reliable pc. My old pc 'confidence' problem no longer exist. I can add also, not a new pc, "confidence". When I try, I get the following message is displayed:

  You cannot add a reliable PC now

  To add a reliable PC to your account, you must have installed Windows Live Essentials. Install Windows Live Essentials

  I have installed Windows Live Essentials.

  Thanks for all the solutions.

  I got the message from Windows Live Essentials do not installed when I didn't sign my Live ID in WLMail.

  You have a confirmed alternate email or SMS phone number address?