get internet connection through another computer...

Similar Questions

• Cannot get internet connection through wireless network

  I have a Sony VAIO laptop that came with Vista 32 bit and went from 7 Home Premium 32 bit.  I connect to the internet via my Ethernet via a DSL modem with no problems.  When I try to use the edge Intel 4965AGN wireless to connect to my DLink 655 Wireless N Gigabit router, it appears that it connects to the network, but there is no internet connection.  Both the router and the edge Intel have the latest drivers and the encryption is set on AES, WPA2-Personal.  Some additional information:

  I have desktop computer Dell with a DLink USB WiFi and it connects to the network and gets internet

  I constantly get the message from Windows saying: Windows has detected an IP address conflict with another computer on the network.  I restarted the router several times to no effect.

  In network and sharing Center (of course the troubleshooting network said he found nothing) the network appears as a Public and unidentified and it gives me no option to change it to a home network.

  I tried to connect to other networks public wireless (hotspots) and I can't connect it

  Hello

  Something is wrong with the TCP/IP parameters.

  Autoconfiguration IPv4 address:169.254.1 52.88
  IPv4 subnet mask: 255.255.0.0
  Autoconfiguration IPv4 address: 192.168.0.1
  IPv4 subnet mask: 255.255.255.0
  IPv4 default gateway:

  This 169.254.1 52.88 is the IP by default Windows assigns when there is no DHCP server, this isn't a working IP address.

  The second IP address is the IP address of the Wired card. That is why router conflicted reports.

  Configure the two cards for full Auto obtain IP and DNS.

  Then do a WinSock and TCP/IP updating.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• share my internet connection with another computer using a router

  My question is if I give you my wep key to another computer in my house so that it can access the internet will be my files or no matter what content of my computer stays private, I need to share my internet connection without sharing something else?. Thanks JF

  In general, it is safe to do so - just a person granting access to your network will not give them access to your files on your computer unless you are already sharing files with another computer on your network.  In this case, you want to check your sharing settings to make sure that the shared files are not available for all users of the network.  The thing I'd be worried, is whether or not the person you share with is "don't own"-no virus, malware, etc. on their computer, given that some of these programs can spread via a shared network connection.

  "Jeanfrancoisdoray" wrote in the new message: * e-mail address is removed from the privacy... *

  My question is if I give you my wep key to another computer in my house so that it can access the internet will be my files or no matter what content of my computer stays private, I need to share my internet connection without sharing something else?. Thanks JF

• I have to start two times to get an internet connection through my ZyXEL_P-2602HWT-F1

  Hello
  I have W7 64 Pro SP1 and it worked well until I get a new modem ZyXEL_P-2602HWT-F1 from my internet provider. In almost the same time that I upgraded W7 SP1 so I don't know which is the cause of this problem I have. If I boot my computer for any reason, I don't get any internet connection. I have to start again.

  My other computers get internet connection immediately as above machine before these two changes.

  Please help me find out what's wrong because it's very irritating.

  PIKO

  Hello

  This looks like a problem of driver for me. I communicate with your access provider which you gave the new modem and ask them where the driver is available for download. I could find this model on the site of ZyXEL either.

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• you have been disconnected from gamespy, you have connected on another computer

  on fsx im having truble with lifting a session with a friend we can just connect to fly together and we always get connected to fsx as long as this message (you have been disconnected from gamespy, you have connected on another computer) also noticed that most of the flights free sessions are locked why? Dome one can help me solve this problem please

  Hello

  I suggest you follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/819836

  You can also follow the steps in the link:

  http://support.Microsoft.com/kb/303032

  If the problem persists, you can communicate with FSX (Flight simulator x) support for other assistance and may also post you your request in the Flight simulator community. Please visit the link to contact FSX (Flight simulator x) support for assistance:

  http://support.Microsoft.com/GP/games-for-Windows

  http://www.flightsimulatorx.it/it/index.htm

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  On Friday, June 8, 2012 14:45:42 + 0000, Ian 213 wrote:

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Your router provides firewall protection, so the need is not the same
  as if you had no a router. There are some who say you need to no.
  all firewall software.

  But my opinion is that you would be a lot safer if you have run a
  router software, and since there is little reason not to, I
  recommend that you do.

  Ken Blake, Microsoft MVP

  I agree.

  @OP Windows XP (SP2 and above), Vista, 7 and 8 all have active firewall software by default.

  There is no need of any 3rd party firewall.

  Some users like running programs such as ZoneAlarm because it warns him from the processes that use the network, and then there is the possibility to deny/allow it on the spot, or deny/allow forever. There may be slight discomfort in the installation, but once it's for all your programs, and then it really can work in silent mode.

  Microsoft Firewall simply leave everything default, but they can be configured manually to block anything outgoing or incoming.

• connect to another computer in directory shared

  I have a valid IP and I want to connect to another computer (a valid IP) of shared directory

  Someone correct me if I'm wrong, but I don't think what you're trying to do is easily achievable.

  The best way to make documents shared between two computers is using some sort of cloud like Skydriveonline storage.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• INTERNET CONNECTION PROBLEM - laptop computer connects is the DNS through the modem to broadband gateway to resolve the address of Web site

  Regardless of the browser that I use on my VISTA laptop, navigation stops... which means the laptop connects is no longer the DNS through the modem to broadband gateway to resolve the address of the Web site.

  However internet is on and some applications that Act on the internet are connected and okay. for example: Skype

  Hello

  Try this process.

  WinSock and TCP/IP

  When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files  When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.

  If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh int reset

  And the sam to do this.

  ipconfig/flushdns

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• How can I get internet connection from my laptop through my mobile device (it's just a rhetorical question)

  Hi,)

  "This is only to have knowledge of some aspects on the internet).

  I have samsung mini S4 mobile with internet connection.

  Suppose I'm somewhere whitout your support and I want to internt with my laptop through my mobile.

  What steps I have to do so that the internet connection via my cell phone.

  Thank you

  Johan

  Hello Johan,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  I suggest you try the following steps and check if it helps.

  a. connect your mobile device to the computer. If you use a USB (Universal Serial Bus) modem, simply plug it into a USB port on the computer. If you connect a mobile phone, connect the USB cable to your computer at one end and on the cell phone on the other.

  b. software start Internet sharing. If you use a cell phone, search for Internet sharing application from the 'Start' or 'Applications folder' menu on your phone. If you connect a USB modem, run the software supplied with the modem to start the connection.

  c. start the connection sharing. On the mobile phone, make sure that the Internet sharing application is set to share the mobile connection via USB. Once set, press the soft key 'Connect' on your cell phone or smart phone to share the connection with a computer. If you use a USB modem, click the 'Connect' button in the software of connection on your computer Desktop Manager of.

  d. check that the connection is active. After the Internet software to share bed 'Connected', open the network and sharing in Control Panel"and check that the connection is as a wired Internet connection. The control panel is located on the "Start" menu on your computer.

  e. connect to Internet. Launch a web browser or e-mail on your computer and check that the connection is active. Download and send to your connection speed will vary depending on force carrier and cell phone signal.

  f. put an end to the Internet via mobile by pressing the function key "Disconnect" on your mobile phone, or if you use a USB modem, click on the button "Logout" in the connection management software installed on the computer.

  Please also see this link:
  http://www.Samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00024090&fm_seq=24258

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• SSL vpn through the same internet connection to another site

  Hi, I have a network with a box of Juniper SSL that connect to port DMZ ASA5510, wher outside the ASA is the same outside the box of SSL vpn.

  To access issues eno hav network internal at all.

  Now, I need VPN SSL Juniper box remote users and internal conenct o my remote sites, who take the client connection through an internet router (Cisco throug site to site vpn IPSec) again to the th eremote site.

  Is it possible, my hunch is Yes "can be done."

  Currently, I'm fitting get no where, I get no hits ASA DMZ ACL if I try to access the remote site of the SSL vpn client resources.

  Schema attached

  Any help would be appreciated

  Shouldn't be a problem.

  On the Juniper SSL, you must check if the roads has been added to the remote IPSec LAN point to the ip address DMZ ASA instead of pointing to the internet through the Juniper SSL box.

  You need to configure NAT exemption on the ASA box between the pool SSL subnet to the Remote LAN of IPSec. As a result, you must also include the SSL subnet to Remote LAN subnets in the crypto ACL and mirror image ACL on the remote site ACL Cryptography.

  Hope that helps.