Host is not responding

Similar Questions

• Manually migrate virtual machines from the host is not responding.

  I have a 3 host cluster.  One of the guests became unresponsive.  Continue to run all the virtual machines connected to the host is not responding and I can't RDP for them.  I am able to SSH to the host does not respond, but not connect via vCenter.

  Restart the services will cancel the virtual machines running?  If this isn't the case, then what is the command to restart the services?

  What is the best plan to manually migrate those virtual machines for the other two hosts?

  SSH, cd to \usr\sbin, then run "services.sh restart" (without the quotes). Which will restart management services, with no impact to your VM. Then you should be able to re - connect with Vcenter.

• ESX host is not responding

  Hello

  now, I have a problem.

  a customer has 3 blade IBM HS23.

  because in the course of the last 7 months I had 4 times the host esx became offline / insensitive

  all the vm continue to operate therefore continues to operate production

  ESX host do not react on SSH connection or telnet

  I can connect after pressing F2 and F12, but then the host everything crashes

  I can't connect to the vi to the ESX host client either.

  all hosts are installed on the IBM's USB drive

  the only thing to solve it is to off the blades and start again

  also random sound. I had 3 months running good, good running 1 day and 3 weeks running good

  the vpxd.log file displays only the waiting times to communicate with the esx host and then the error offline

  already updated all my firmware (chasis, blades, storage, fiber brocade and IBM switches)

  I started with vsphere 5.5 u1 U1 and ESXI 5.5 IBM. already updates on vsphere 5.5 U2 and 5.5 ESXi vmware u2 (since ibm doesn't have an ESXi custom 5.5 u2)

  im stuck... lil last event is on 16/01/2015 (and ibm will not support since there only subscription for 3 years and no software support contract)

  one last point, I'm under bacup veeam and 7.x replication but don't see a problem there.

  Thanks in advance.

  I found the problem

  I've restarted only iSCSI data store and all ESXi hosts becomes sensitive

  so, after searching for the qnap forum I noticed that they have released an update on 29/01/2015

  test of the firmware now and see what happens

  If this fails, I guess the qnap ts - 469L is not taken in charge more for vsphere 5.5

  Thank you all for the suggestions

• 5.0 ESXi hosts all say "not responding" after a while

  Hi all

  First of all, yes I know this is a repetition of something that is posed before but I tried all the resolutions that I can find - nothing has worked so far.  In the vSphere client, all hosts currently have a status of "not responding". For reference, however, here is what I have tried/checked so far:

  -vCenter and ESXi are all in evaluation mode.

  -I do not use the brand HP ESXi ISO (as referenced by http://communities.vmware.com/message/1852500 more numerous other positions of the community).  Material * is * HP hardware, though.

  -Change of the security policy of vCenter Server (as referenced by http://communities.vmware.com/thread/271809).

  -Go through all checks VMware published listed in http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003409.

  -Network connectivity verified using PING, nslookup and telnet on port 902.  All ESXi hosts respond on port 902.

  -AD DNS monitoring verifies that all say "Pass".

  -There is no firewall on the network (it has physically isolated from everything, including the internet... obviously I am writing this post on another network).

  -Direct connection to the ESXi hosts works very well - this only happens when connecting through vCenter (so running virtual machines are available and usable without any problem... There is no HA).

  -/etc/VMware/VMware.LIC has a license of '0' key (confirms the status of the evaluation, I think).

  -/etc/vmware/vmware.lic mode is the following... - rw - T.

  -All hosts are on the same version of ESXi.

  -There is only 1 Server vCenter.

  A strange thing is that some items, including VMware ones, say to run 'rpm' and 'service' in a variety of different ways.  'Rpm' or 'service' are valid commands on my ESXi servers.  This seems odd, unless ESXi 5.0 withdrew these commands to the shell.

  Can anyone suggest anything else that might be the cause?

  Thank you!

  If VC is virtual and the problem that happens on the same ESXi what they are and all on the same subnet, I am almost sure that something on your windows it blocks. Check the steps in KB http://kb.vmware.com/kb/1029919 to try to discover what is happening.

• vCenter Server 5 added hosts after short time of State "not responding".

  Hello

  I did a test of the configuration with ESX5 a vCenter Server 5 device.

  I could add a host, but after a short period of time (a few minutes) host all become the status "not responding".

  restarting the management agents fix for a short period only.

  directly linking hosts vSphere Client works very well.

  any suggestion?

  Kind regards

  Ivo

  There is a bug in HP ESXi5 ISO, see here: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&tmp_geoLoc=true&docname=c03007056

  You must uninstall license preloaded from HP.

• Windows Shell common Dll does not respond and the Windows Rundll32 host process has stopped working

  I got two errors above and try to solve them without my success. My computer is slow, and several programs say "not responding" for a while until what they caught finally upward.  It seems that I have a driver problem. Any advice?

  Hello riondet,.

  Thank you for using the Microsoft Windows Vista Forums.

  How long did you receive these error messages?   Did you change your operating system before thses errors?  All new software/hardware installed or new Windows updates?

  It seems that a dll is missing. You can fix it easily if you have a vista bootable disk.  Just boot from the disk and click on repair your computer and then click on start option repair and it will do the rest.

  or, if the problem is not resolved, then insert the vista dvd and then open the command prompt as administrator, and then run the following command...

  C:\sfc scannow

  and then press ENTER.

  Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.

  my kids are always downloading music and other things on the internet and some without reason, I lost my sound that I get an error that there is no audio device found... or being used?  This was the last message according to test of microspft race driver and then tried to play something of my documents... Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.  Can you help?  Bill

  (1) try reinstalling the audio drivers from the drivers disk that should
  came with your PC.
  (2) try to do a restore to the point where the problem wasn't there:
  Start > programs > Accessories > system tools > system restore
  (3) download and install the latest driver from the manufacturer's website.
   

  Best regards
  Singapore Web hosting

• Unable to connect to the internet, the dns server is not responding

  Hello

  It is the second system I've seen in the last two weeks with this question, I reloaded the OS on the first.  The system is Windows Vista Ultimate x 64.

  That is the problem.  Open Internet Explorer 9 on a Windows 7 PC, you get the message:

  Internet Explorer cannot display this webpage

  Click on diagnose connection problems, you get the following:

  The DNS server is not responding

  Look at a detailed information your told to contact your network administrator (this is me - no other XP or Windows 7 PC on the network has a connection problem).

  Below that is the message:

  Your computer is trying to use a DNS server that is incorrect or does not exist.

  Note that this is a laptop that has started on another network with the same problem.  I took it to my office to solve problems.  My DNS server is a WIndows SBS 2003 server.

  Below that is a log file of etl you cannot open (Notepad considers undesirable, much of the use that is).

  The steps I did to try to resolve the problem.

  Virus system scan

  There is no hosts file, I've recreated which.

  The static value IP and DNS.

  I can ping the DNS server by its IP address, but not by name.

  I put the DNS address to 208.67.222.222

  Restored network drivers

  Reininstalled all network drivers

  Disable Microsoft Virtual WiFi adapter

  Any suggestions would be helpful.

  the

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to reset the DNS cache by using the following steps and check it, if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER: ipconfig/flushdns

  c. you will see the following confirmation:

  Windows IP configuration

  With success, emptied the Cache of DNS resolution.

  Method 2:

  Try the following steps to release and renew the IP address and check if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER:
  - enough ipconfig at the command prompt and of the press ENTER
  - ipconfig / renew in the command prompt and press ENTER

  c. check if the problem is resolved.

  Hope the information is useful.

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• ESXi host goes to the State and the virtual machine does not restart on other host does not

  Hi all

  I'm looking for a solution, in which case the host goes to the State and the virtual machine on it does not restart on a different host (they'll just gray) does not not what could be the problem here and how to fix it

  later when the failed host returns upward machines either go to motor off the coast of the State, or they show that under tension

  While the host is down or not responding do not I am able to ping the host ESXi (5.5) and able to ping the default gateway and the DNS servers of the host itself

  Yes AF, the answer to all these questions is Yes, it is a HA and DRS cluster active, I tried restarting mgmt service, we use a shared storage (storage iSCSI HP 3PAR and left hand)

• Create array of IP addresses that do not respond to ping

  I am an intermediate Powershell user, but having a little trouble wrapping my head around how to do it.

  I have a powerCLI script that creates a number of virtual machines based on a variable, and I need to take it to the next level of intelligence:

  # Global Variables

  $vCenterServer = "vCenter.domain.com".

  $serverCluster = "cluster 02."

  $primaryDNS = "10.11.10.11".

  $secondaryDNS = "10.11.10.12".

  # Environment variables

  $jumpstartPool = get-resourcePool-name common - location $serverCluster

  $jumpstartCustomization = "newAutoSpec".

  $jumpstartCurrentTemplate = "template".

  $jumpstartDatastore = "data store".

  $jumpstartFolder = 'test '.

  $jumpstartPrefix = 'server '.

  $jumpstartSubnetMask = "255.255.255.0".

  $jumpstartGateway = "10.11.150.1".

  $jumpstartRange = "10.11.150".

  # The Variables de Configuration automation

  $vmCount = '2 '.

  $ipArray = "need some help here.

  # Startup script

  # Connect to the server vCenter Server with local credentials

  to connect-viServer-Server $vCenterServer

  # Define technical mapping of NIC customization

  Get-OSCustomizationSpec-name $jumsptartCustomization | Get-OSCustomizationNicMapping | Game-OSCustomizationNicMapping - IpMode UseStaticIP - IpAddress [$a] $IParray - $jumpstartSubnetMask - passerelle_par_defaut $jumpstartGateway - $primaryDNS, $secondaryDNS Dns subnet mask

  # Create virtual machines

  1.. $vmCount | {foreach}

  $y = "{020:D3}" f $_

  $vmName = $jumpstartPrefix + $y

  $esxServer = get-Cluster $serverCluster | Get-VMHost-State connected. Get-Random

  write-host "Creation of Machine virtual $vmName initiated"-green foreground

  New-VM-name $vmName - model $jumpstartCurrentTemplate - ResourcePool $jumpstartPool - $jumpstartDatastore - $jumpstartFolder location data store - OSCustomizationSpec $jumpstartCustomization - RunAsync

  Start-VM - $vmName VM - confirm: $false - RunAsync

  }

  but the last piece I am trying to understand is the IP address table.  Here's what I want to do with it, see if anyone can help with thoughts on that.

  • Ping (or connect remotely) a range of IP addresses, in this case 10.11.150.10 - 10.11.150.250 and released those who fail a connection to a range of IP.  The goal is to use this to fill in the information of IP address for servers that are being created.

  As a little more description here, maybe this contributes to possible scripting, I'm creating servers with the 3 last even as long as the last octet of the IP address.  Thus, the script will run, find IPS that are open (not ping response) and deploy servers model based on IP addresses.  For example, if 10.11.150.55 is crazy, does not, the script will deploy the server of server055 with the IP address of 10.11.150.55.

  Thanks in advance for the help

  Something like this will provide a table with IP addresses that do not respond.

  $array = 1.20 | % {'$192.168.1 _"}

  $freeIP = $array | %{

  If (!) () Test-Connection - ComputerName $_-count 1 - quiet - ErrorAction SilentlyContinue)) {}

  $_

  }

  }

  $freeIP

• ESX host does not not in vcenter

  Nice day

  I have two ESX 4 hosts in a cluster configuration, each running several virtual machines.  Yesterday afternoon, something happened to one of the hosts and now he is in a State of "not responding" in vcenter, and I can not ping to the host or the ping from the console of the host.  Fortunately the other host took over the failed host VMs for now.  The physical box that the failed host runs on seems to be fine, in addition to the switch between the two hosts.  From the ESX console on the failed host, the network configuration is correct, all network cards are up, so I don't know what I should check then.  Any ideas as to where the problem may be?

  Thank you very much!

  -Matt

  If there is no virtual machines running on this host, you should try a reboot.  pass may have crashed.

• VMware workstation 7 is not responding

  Hello, I have vmware workstation 7 and every time that I open it, it says not responding do not? No idea how to fix this?

  Thank you.

  XP, 2000 and 2003 hosts:

  C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation

  Vista and Windows 7

  C:\programdata\vmware\vmware workstation

  Linux

  / etc/vmware

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• "The update server is not responding"

  I am a member of creative cloud and I'm trying to update Photoshop to 13.1 but whenever I go to help > updates, Adobe Application Manager keeps giving me "the update server is not responding...". »

  I solved the problem. After countless times of updating of Windows 8, uninstalling and reinstalling, I found that my laptop Samsung came with software that would allow me to put a "Mobile Access Point" or in other words a hotspot.

  I followed the instructions on how to disable the "Microsoft Virtual WiFi Miniport Adapter", but my computer does not display a Miniport Microsoft Virtual Mifi card.

  I knew that this adapter set a hotspot so what I did activate the 'Mobile Access Point"via the samsung software that came with my computer, and then as I expected, he showed the"Microsoft Virtual Wifi Miniport Adapter"and was able to turn it OFF.

  After you turn off, I could see updates without the server update Responing no error.

  Also, after having diabling the "Microsoft Virtual Wifi Miniport Adapter", I went to the Device Manager and the title of the network card, I found that "Microsoft Hosted network virtual card" has been disabled. So for those who don't see not the "Microsoft Virtual WiFi Miniport card" you must activate a hotspot first if it will appear or try to disable through Device Manager by disabling "Microsoft Hosted network virtual card"

  If this proves to be a problem with Adobe Application Manager and Microsoft Virtual Wifi adapter. I hope that Adobe will have a fix for this soon because the users of Windows 8 is not the "Microsoft Virtual Wifi Miniport Adapter" visible by default.

  I hope this helps someone!

• Message "Not responding" when recording in CS5

  Today, it is the first time that I had the chance to get out my new illustrator CS5 for a drive and have found that the more often than otherwise, when I save the file, I'm working on I get the error message "Not responding" appear. My system is a brand new Dell quad core, Q955-@ 2.83GHz with 8 GB RAM running Win7 64 bit.

  The files that I use are located on a network drive, and I wonder if this may be the problem. If I let it go for a minute or two that he corrected himself, but I find it a bit odd, given the software and materials, that I am running.

  No idea where to start?

  Given that disconnect him persistent mapped network drive, my problem went away. So far so good.

  To clarify my question, I saw intermittently a message "Not responding" in the title bar of Adobe Illustrator CS5 when you try to save a drawing. By clicking on file/save would immediately show a wait cursor (blue circle in Windows 7) and the Save dialog box does not appear.

  Although the error "not responding" appears, my PC does not seem to be busy doing anything (no use of the CPU for the executable to HAVE it in the Task Manager).

  After some searching on Google for hung in Windows 7 when recording applications, I came across the following Microsoft link:

  http://support.Microsoft.com/kb/313937

  According to Microsoft, Windows 7, when you save, first checks the availability of network resources (persistent mapped drives liked). Applications like MS Office may crash when you try to save if these network resources are not available. Windows 7 seems to also not 'hear' well with older versions of Windows (such as Windows 2000 for example). The guillotine registration number can also be caused by a slow network connection to network resources.

  In my case, I had:

  1 - a slow link between the guillotine Windows 7 PC and a persistent (ie - reconnects when connecting) mapped network drive.

  2 - the network drive is also hosted on a Windows 2000 Server (Windows 7 is not always play nice with Win2K)

  After disabling the group policy that this drive mapped to the login time, my question GOT hooked disappeared. I can still reach the reader via a shortcut on the desktop of the PC Win7, and which seems to work very well. It is only when this resource has been "localized" as a shared drive that this become a problem for Windows 7.

  Anyone having this problem should also verify the possibility of losing your network connection to a shared resource (as the network adapter passes in mode "sleep" because energy saving options and thus break the connection to the network).

  Hope this helps others.