Host of migration on 2 no and 2 network vMotion

Similar Questions

• migrate vm of DVS and standardswitch network cards

  Hello

  Does anyone know how to change the NIC a vm that is connected to a DVS at a standard portgroup. (POWERCLI)

  Standard switch exchanges have the same names as those of DVS.

  If possible, is it possible switch toe back switch standard dvs?

  We need for a migration online 55 ESX virtual machines between two different environments.

  Thank you

  O.Muntslag

  To save the portgroup in a variable for a standard switch, you can use a command similar to the following command PowerCLI:

  $PortGroup = get-VirtualPortGroup-NetworkName name - Virtualswitch vSwitch1 - VMHost ESXi1

  To save the portgroup in a variable for a distributed switch, you can use a command similar to the following command PowerCLI:

  $PortGroup = get-VDPortgroup-NetworkName name - VDSwitch dvSwitch0

  Using the variable $PortGroup, you can modify portgroup nic a vm with a command similar to:

  Get-VM-name VM1. Get-NetworkAdapter-name 'NIC 1' | Together-NetworkAdapter - Portgroup $PortGroup - confirm: $false

• How do you keep the guests on their hosts (no migration) by making the food stops.

  I apologize in advance for the length of this post.

  In general do not much poster, but a lot of reading.  First of all, let me tell you that I'm not a GURU PowerCLI, never written one in my life, but there is always a first time.

  Background:

  Under VMWare 4.1, that us did not run with HA, for whatever the reason why I don't know.  We had (our UPS manufacturer) Liebert software called MultiLink that when there was a power outage after 15 minutes would run a .bat file on the server vCenter for windows that would log on to the vmware host and run a file .sh that accumulate all the machines on the host and start making judgments on them.  Once completed the host itself would make a stop.

  Currently:

  Improved 5.5 VMWare vCenter, have HA and followed now host active in the configuration. We find that we can follow is no longer the practice that we have done less than 4.1.

  I got a new version 4.2.4 and that it contains, there is provision in interface with VMWare through the PowerCLI and it stops all guests on the host computer. The host then stops.

  I suspect STRONGLY that when the command is issued to stop the host itself, HA or monitoring kick and migrates customers and/or models out of the machine, before the machine shutsdown.  In the first tests, I had a host with 5 models, 1 windows machine and a Virtual Appliance on it.  Everything was arrested, as was that it was supposed to, but the host was brought back to the top he had nothing on it.  Models and machines had been moved (spread) for the two other machines.

  This has been confirmed in another test on 01/05/2015 through vCenter client connection, the guests have been stop, the by refreshing the screen you could see the machines leave the test machine, then the server itself, stop.  In a subsequent test, I commented on the "Shutdown the ESX hosts" part and the machine down and remained where they were.  So I'm guessing that it has something to do with HA, surveillance or other thing that needs to be defined differently for him to stop guests from the host, stop the host, BUT not to migrate comments to others running machines.  Do I need to enter the maintenance or standby mode before making the shutdown command?

  Any help would be greatly appreciated.

  You can avoid the confirmation prompt by adding the -confirm: $false pass.

  What follows will check all clusters and those where the priority of restarting is not disabled, is set to disabled.

  Get-Cluster |

  where {'ClusterRestartPriority', 'High', 'Medium', 'Low' - contains $_.} HARestartPriority} |

  HARestartPriority-set off Cluster - confirm: $false

  In this way, HA will continue to function (for ESXi other nodes in the cluster), but virtual machines will remain on the crux of ESXi, you stop.

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• User-mode Driver Framework Host Process has encountered a problem and needs to close...

  I have an e280 and have been using Napster to Go for a few years. Computer running XP. All of a sudden, we get this message when you plug the Sansa in MTP mode:

  Windows Driver Foundation - User-mode Driver Framework Host Process has encountered a problem and needs to close.  We are sorry for the inconvenience. 

  the error signature:

  szAppName: WudfHost.exe szAppVer: 6.0.5716.32 szModName: WudfHost.exeszModVer: 6.0.5716.32 offset: 000130f5

  technical information about the error report:

  C:\DOCUME~1\EARLDA~1\Locals~1\Temp\WERb6aa.dir00\WudfHost.exe.mdmp

  C:\DOCUME~1\EARLDA~1\Locals~1\Temp\WERb6aa.dir00\appcompat.txt

  Sansa works very well in MSC mode, but then I can't synchronize with Napster. WMP 11 has updates. I tried many tips from Device Manager that have been mentioned, but it will not be installed successfully.

  Any thoughts?

  Thank you!

  You can try to go back to WMP 10, remove the driver framework user-mode (on the Panel-> Add/Remove Programs) and then update back to WMP 11.  It might even work with WMP 10, so try before upgrade to WMP 11.

• load a sitwe muse in a host of maintenance charges with mobile and tablet version?

  Hello everyone,

  I want to make a website and I'm in doubt with one thing: when I insert a muse cc site in a hosting service, it loads with mobile and tablet of the site version or just the version of web browser?

  Help me please, thank you, leo

  Muse will post all data, which are needed for each design, which is encorporated within your site.

• need to get the time host was put in the annotation and maintenance mode

  Hi - it is possible to get the time that a host has been in maintenance mode and also seize any annotation is attached to the ESX host in VC?

  Thank you

  ~ Sai

  Also, by using "get-vmhost" twice is redundant since you have channeled from get-vmhost: "E = { get-vmhost $_ |}". Get-vievent ".

  However, your order will be to return the entire event object and look like:

  Name                                    Event

  ----                                    -----

  host {VMware.Vim.EnteredMaintenanceModeEv...

  You can try below instead:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. FullFormattedMessage-like"* entered maintenance mode *"} (). " Createduserid}}

  But it can still recover multiple events, so a way to get only the last event and time is below:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. {"FullFormattedMessage-like" * entered maintenance mode * "} | toplayer-last 1). Createduserid}}

• Migrate Repository designer SDDM and fusion in VisualSubversion

  I'm filing our great Oracle Designer migration to Oracle SQL Devleoper Data Modeler. A few months back I imported Designer SDDM and changed some diagrams to resemble those in the designer in a sandbox on my workstation. In the meantime I've set up a repository subversion on a server and made changes in the designer. At this point, I want a smooth migration of the designer and to merge with the sandbox. It's only a couple of patterns that have been modified in SDDM.
  
  It is interesting to try to merge, only two patterns? If it's worth what is the process? I watched several videos and know how to import Designer SDDM and check it into Subversion. But how do I merge what is already on my workstation in Subversion.
  
  I'm on SDDM V3.1.1.703 and VisualSubversion V 2.5.6.
  
  Thank you
  
  Marcus Bacon

  Hi Marcus,

  It is not possible to merge the only patterns if you do not merge used objects. I logged a bug for this.

  Philippe

• Hyper-V and iSCSI network

  Hello

  We evaluate a migration of vmware for hyperv.

  I try to understand best practices for networks iSCSI comments.

  I have physical 4ports 1GBit dedicated, on the host for iSCSI traffic.

  I like to use all 4 for iSCSI host (vhdx volumes) traffic.

  Now I thought to do 2 of them shared by creating 2 logical switches in VMM, adding 2 virtual network cards for the host to use.

  The new virtual network cards are 10 Gbit. I don't see an option to change them to 1GBit. To me it seems now that the system prefers the 10 GB adapters. My other two physical cards are no more used.

  I tried to do all 4 ports as virtual, but somehow the 4.7EPA ASM does not see virtual cards. He said only: "no network adapters don't find" at the opening of the MPIO settings.

  Should I just ignore this idea to share and use 2 for host and 2 for iSCSI hosts, or is it a medium work?

  It is recommended to devote at least 2 interfaces on the host iSCSI network.  In addition, you must install the Dell EqualLogic for Microsoft host integration tools and install the MPIO feature.  To enable the MPIO in the guest operating system, you must create at least two virtual switches that are related to the physical SAN on the Hyper-V host adatpers.  Virtual machines must be configured with at least two of these virtual switches.  Then, since the guest operating system, configure interfaces with IP iSCSI network, Subnet, etc...  You must also install the Dell EqualLogic for Microsoft host integration tools and functionality MPIO DSM in the guest operating system, if it is not running Windows.  If you use Jumbo frames, ensure that all NETWORK adapters used for iSCSI (NETWORK physical cards, NETWORK cards, Guest OS NICs) are enabled for frames.

  In regards to ASM v4.7 EPA you don't see not cards network for MPIO - there is a known ASM / ME v4.7 bug in Windows Server R2 2012 linked to the EPA.  It is likely that the configuration of MPIO is fine (you can check it out through the initiator Microsoft iSCSI MPIO EqualLogic tab - it's just that ASM / me has a problem of information display.)  This bug has been fixed in version recommended to v4.7 GA HIT/Microsoft - which is intended to be published very soon.

• The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode.

  Hello everyone

  Here's the situation...

  I have:

  vSphere 5.1 Cluster with two 5.1 ESXi hosts and configuration VSA.

  vCenter Server running on a virtual Windows Server 2012 machine.

  Task: Transfer virtual vCenter to a physical machine.

  I have install the physical machine with Windows server 2012.

  Installed vCenter 5.5 (hosts Newer then the ESXi 5.1)

  VSA installed Manager (VSA Cluster 5.5)

  When go to VSA Manager I am introduced to the following screen...

  

  Recover DOES NOT work!

  Full move operation DOES NOT work!

  It recognizes the Cluster AUV-> check availability (is online and OK)-> begins to create the Cluster VSA and it fails with the following error...

  Move the cluster host

  VSA HA Cluster

  The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode. Under voltage or suspension of the virtual machines on the host can use the CPU features hidden by this mode.

  Could someone please help?

  Thanks to you all! This problem has been SOLVED as follows...

  • VCenter Server go to--> "C:\Program Files\VMware\Infrastructure\tomcat\webapps\VSAManager\WEB-INF\classes".
  • Open the file "dev.properties" with Notepad
  • Change the line that says "evc.config.baseline = lowest" to 'highest = evc.config.baseline' and save the file.
  • Perform the SERVICES. MSC and reboot 'VMware VirtualCenter Management Webservices'

  After that it of back in the VSA Manager and run it again 'Cluster of VSA recover'!

  Now, the wizard should be able to add hosts to the inventory, create the HA Cluster and add hosts to the HA cluster and configure Cluster HA.

  Done everything! :-)

• Networking VMotion and fault tolerance

  We will configure separate vSwitches for management, vMotion and FT. Each will have a pair of physical interfaces. I wanted to know if it is advisable to have separate IP space for management of ESX, vMotion and FT of if they are all on the same VLAN? If the load is a determining factor, assume heavy vMotion and load FT. 192GO by potential server for 40-50 virtual machines per host.

  I'm a newbie to networking Yes, if separate IP space is a recommendation, which is the basis behind this reasoning?

  I recommend you set up 3 different IP subnets. The subnet IP public/business for the network management and two separate for vMotion private IP subnets and FT. All three go in the VMkernel and from what I've read so far, put them on the same subnet may cause problems with routes traffic through the appropriate interfaces. In addition to this, it makes sense for safety, as amvmware already mentioned.

  André

• Cards VMnet1 and VMnet8 and private network of the type of work

  Hello

  I installed VMware Workstation 7.1.4 on Windows 7 Home Premium 64-bit, and I created a virtual machine so that it goes on internet in bridge mode.

  I noticed that, in the 'network and sharing Center' on the host (192.168.1.2), VMnet1 and VMnet8 adapters are associated with an unidentified public network.

  Using the virtual network Editor, as do change the parameters of VMnet1 and VMnet8 to ensure that the network, associated with those adapters adapters, is considered to be a private network work type (category = private, location = work)?

  Thank you

  Good bye

  The best way to proceed is to exclude the two cards VMWare Windows NLA (Network Location Awareness), which is what controls your network location. Other suggestions (Windows Firewall disabled, among other things) is not acceptable.

  Follow this link for more details on how to perform the operation:

  http://www.Petri.co.il/forums/showthread.php?t=45181

• HP Pavilion 15 laptop-p051us: bottle-necking and Brighthouse Networking...

  Greetings programs,

  I signed up for 35 G internet with Brighthouse lightning in August of last year. Worked great for two months, then started getting more slow slow and capped speed DL 12 G.

  BrightHouse over the last two weeks came out and replaced all the cables on the House, the street and poles near home. Replaced twice modem (Motorola, only an Arris, now a huge Ubee modem. Thinking it was my four year old and put DLink upgraded router to a Linksys AC1600 model +. I even spent two days and six hours on the phone with supervisiors to Brighthouse trying different things. Nobody seems to know what to do. When I bought this laptop that is Windows 8... and has been finally updated to 8.1.

  BUT...

  I'm still a bottle neck to 12g on the laptop... but devices ALL wireless, three tablets, three phones, PS3 (connected, but capped by Sony at 20G) etc. are the actual speed. ONLY my laptop is capped at 12 the wire or wireless... BUT when I got the service in August of 2014 all worked for two months. Laughing out loud.

  I have rand scans using malicious software Bytesand Microsoft Security Essentials to see NOTHING infect my laptop. I am at a loss now what to do.

  Need help...

  Hello @NeuroMan42,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop's Wi - Fi connection keeps dropping, and I'd be happy to help you in this case!

  To re - establish a coherent link between your laptop and the network, I recommend later in this document on troubleshooting wireless network and Internet (Windows 8). This should help to run a diagnostic on your system using the network and Internet troubleshooting, as well as measures to maintain your system over the wireless network.

  In addition, I suggest also follows the steps below to ensure that your power management settings do not interfere with

  the connection to the network:

  1. open DEVICE MANAGER
  2. open the NETWORK CARDS
  3. right click on the WiFi adapter for the pc and left click on PROPERTIES
  4. click on POWER up.
  5. remove the check mark beside : ALLOW the COMPUTER TO TURN THIS DEVICE SAVE START STOP
  6. click on OK
  7. close DEVICE MANAGER and test.

• I mistakenly remove updates from facebook and other networks, please how to restore it back

  Original title: error.

  I mistakenly remove updates from facebook and other networks, please how to restore it back

  I mistakenly remove updates from facebook and other networks, please how to restore it back

  Hello

  Use the following website links to Facebook help.

  Facebook Help Center | Facebook: http://www.facebook.com/help/

  Facebook Support Forums: http://www.thefacebookforum.net/forum

  Concerning

• At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  original title: server and virus problem

  Hi SurajMendon,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.

  Networking platform

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads