Host of XP with 4 GB of Ram - how much memeory can I connect to all virtual machines?

Similar Questions

• No network connection between the virtual machines on different hosts ESXi

  I have several 5.0 ESXi hosts in a cluster managed by vCenter Server 5 and I have network problems:

  1. [Host A] running a virtual machine can ping any other computer virtual running on the [host A] great!
  2. A virtual machine running on host [B] can ping any other virtual machine running on [B] home - very well!
  3. [host A] (from the ESXi console) can ping any virtual machine running on [B] home - even better!
  4. [B] home (from the ESXi console) can ping any virtual machine running [host A] - beautiful set!
  5. A virtual machine running [host A] can not ping any virtual computer running on host [B] and vice versa - bad, very bad!

  So basically the problem is that the virtual machines can communicate on hosts. It is a major problem that I need to fix, for obvious reasons.

  Networking on all hosts is configured exactly the same way: a unique and standard vSwitch with a pair of gigabit network cards grouped, vmkernels configured for the vMotion, NFS and network management and a group of ports configured for the VIRTUAL local area network used by the VMs. (vMotion works fine on hosts, storage vMotion works very well too.) All virtual machines are servers Windows (2003 and 2008).

  Reason #3 and #4 above, my assumption is that #5 must be the result of an ESXi/vCenter configuration issue and not a problem with the switches of material upstream. Is this a reasonable assumption?

  Whatever it is, can anyone offer suggestions on how can I fix? It is quite annoying as I'm pretty sure that these hosts are configured in the same manner as those of our production cluster, which does not at all these problems!

  Thanks in advance for any help you guys can provide.

  To be honest, it looks like a problem with your physical network-

  How is the physical network configured - are NIC connects it to the same physical switches? Are the virtual machines on the same subnet? If this is not the case, they are able to ping the gateway sbnet? Can you piing host IP address from the virtual machines?

  I also moved it to a forum more approiate.

• All virtual machines on my ESX host off power at the same time

  Hi all

  Recently I attend the interview. a guy asked me this question

  < police = "Times New Roman, serif" >all virtual machines on my power off ESX at the same time host < / police >< / police >?

  What was the cause of the highest of the error, how to troubleshoot the error.please me.anybody guide to address this problem?

  Thanks

  Surya

  If all the virtual machines if lower at the same time, my bet would be VMware HA. Just for fun, build it inside your head:

  (1) 8 ESX nodes, all service consoles connected to a unique management switch.

  (2) now to create a cluster of these nodes, put all your virtual machines in there and activate HA, choose ' host isolation response: power off.

  (3) draw power from your management switch. HA on each host will deduct that the host is isolated-> turn off all the virtual machines.

  Each host will think the same thing, and hop find you with all virtual machines down to the time in the whole of the cluster. Have seen this one several times when people go and upgrade their management switches in the evening ("hey, it's only management").

  Visit my blog at http://www.vmdamentals.com

• How to find the IP address of the virtual machines from the host Linux

  Hello

  Y at - it a tool that can resolve the IP address of the linux host running VMS, when using NAT and DHCP networking?

  I can find by logging on virtual machines, but I need to retrieve automatically these addresses for the host scripts will not have to be changed manually when IPs change.

  Thank you

  Host: Ubuntu 8.10 64 bit, WS6.5

  Probably the easiest solution is to use static IP addresses... Having said that, what I meant was:

  Each machine (real and virtual) has a unique MAC address. If I create a file (database type) with the name and the MAC address of each virtual machine, then I could use nmap or arp commands to get the IP address. For example, I create a table and put it in a file like this:

  VMName1 00:14:BF:19:45:61

  VMName2 00:0E:5 C: 1 has: 44:1E

  Name of the machine 3. etc.

  Then I could run a combination of arp and/or nmap to find the MAC address of active machines and their respective IP addresses. For example, running:

  sudo nmap - sP 10.0.2.0/24

  This gives on my local network:

  Starting Nmap 4.76 ( http://nmap.org ) at 2009-08-14 18:09 EDT

  Host 10.0.2.1 seems to be upward.

  MAC address: 00:14:BF:19:45:61 (Cisco-Linksys)

  Host 10.0.2.99 appears to be upward.

  MAC address: 00:10:83:BB:08:99 (Hewlett-Packard Company)

  Host 10.0.2.130 appears to be upward.

  MAC address: 00:0E:5 C: 1 has: 44:1E (Motorola BCS)

  Host 10.0.2.134 appears to be upward.

  Nmap done: 256 IPS (4 hosts upward) scanned at 3.71 seconds

  So, now, I know that the machine VMName1 with MAC 00:14:BF:19:45:61 has IP 10.0.2.1 and is it my Linksys router.

  Just a thought.

• How many monitors can be connected with GTX750 Ti video card

  Original title: connection

  How many monitors can be connected with GTX750 Ti video card

  Request of NVIDIA or the manufacturer of the card.

  IF it is the card you need the info- http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-750-ti/specifications

  But it seems that some do support 3 - http://www.evga.com/Products/Specs/GPU.aspx?pn=70B14BA6-5853-4A65-AACF-CFF61F466D82

  So check with the real manufacturer of the card you are interested in.

• vCenter shows all virtual machines and the host is disconnected

  Hello

  I have a two nodes in the cluster ESXi6 U2 (recently updated to 5.5) running on hp dl380p gen8. For some reason all the virtual machines are running on host A (HA and DRS are enabled).  vCenter shows all virtual machines and host A is disconnected. Cannot connect to A host using vSphere client or web client. Cannot vMotion the VMs. Impossible to activate SSH. Connection DCUI works very well. Cannot perform any action VM

  All virtual machines are in place are running at this point. I don't want to restart the virtual machines. Can you help me please?

  Thank you

  AJ

  Frozen screen DCUI came back to life. The active SSH access, killed the running process. The host of running backs.

  See you soon,.

  AJ

• How many devices can I connect to Adobe drawing, sketch etc with my Adobe account?

  Hey,.

  Is there a limit to how many devices can I connect to Adobe drawing, sketch etc with my Adobe account. I have has some features (shared with the woman) and I was wondering is there a limit even if I am a paying user?

  Thank you very much

  Hi Nick,

  I don't think that there is a limit, in fact... I am connected on three. A few things to think about:

  Not everything either of you will be recorded in an account (depending on your output, it might do a little confused).

  Synchronization, you can occasionally happen that all work is actually based creative cloud backup by connecting to Adobe Creative Cloud (My Active - Mobile creations).

  Who help me?

  Sue.

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• I want to buy the first pro and Photoshop.  How does it interact with creative cloud?  How much will cost me to buy all 3?

  I want to buy the first pro and Photoshop.  How does it interact with creative cloud?  How much will cost me to buy all 3?

  Hello

  Please visit:-Creative Cloud price and membership plans | Adobe Creative Cloud

  First pro and Photoshop are a part of the creative cloud, but you can buy them separately as well.

  Photoshop and Lightroom for $9.99 / month

  Add any unique application just for $19.99 / month

  And all the creative cloud just for $49.99 / month.

  This includes applications such as:-officeAdobe Creative Cloud | Adobe Creative Cloud

• Database SQL query to get all virtual machines with comments enabled customization?

  Hello

  Does anyone know of a SQL query that can be executed against the vCloud Director DB for all virtual machines who invited enabled customization?

  I can't have PowerShell to pull these data on a global scale.

  Thank you

  jkasal

  Has taken a quick...

  Select top 10 v.id, v.name, v.vapp_name, v.vc_id, v.moref, ui_vapp_vm_list_view v.guest_customize_enabled v with (NOLOCK)

  seems to have if the setting is enabled or not.

• The list of all virtual machines with more than 2 virtual disks

  Hello.

  I want to list all virtual machines in a data center vCenter, who got more than 2 virtual disks. Here's the workflow, I am working on that:

  1 get the view of data center

  2. get the Cluster Data Center view like the 'begine_entity '.

  3. for each view cluster overview the VirtualMachine bit cluster seen as 'begin_entity '.

  4. for each VM view, this information: VirtualMachine-> config-> hardware-> device of

  Above information is a table.

  I need help in order to extract information from this table disk, then run an if condition where the VM who got more than 2 discs should print.

  Could help you. I wrote the script to the point 4. just need advice for the posterior.

  Thank you.

  You can try one of the following values-

  1 If ($vm-> {'summary.config.numVirtualDisks'} > 2) {...}

  2 $diskCnt = grep {$_-> isa ('VirtualDisk')} @{$vm-> {'config.hardware.device'}};

  The above assumes that you've got your $vm with a filter property as follows:

  $vms = Vim::find_entity_views (view_type-online 'VirtualMachine'), the properties-online ['summary.config.numVirtualDisks', 'name', 'config.hardware.device'];

  my $vm foreach (@{$vms}) {}

  ...

  }

• All virtual machines with VLAN

  I'm trying to get a list of all virtual machines in a given VCenter, with their VIRTUAL networks. Can anyone help?

  If your virtual machines are connected to dvSwitches instead of ordinary vSwitches?

• HELP PLEASE! I can't power off the virtual machine on host VWware ESXi

  I can not power off the virtual machine on host VWware ESXi is any other command. How can I restart?

  I need to power on the virtual machine, I did not back up!

  Thank you very much

  Hello

  in the ESXi console, run esxtop... you see the functioning of the virtual machine?

  If this isn't the case, you can restart management agents in the ESXi and you will be able to turn on the virtual machine again.

• I can't power on a virtual machine (with linked disks) after the addition of new hosts of Lab Manager

  ENVIRONMENT

  -Lab Manager 3 using VC 3.5

  -Initially the 2 hosts in a cluster and managed by LM

  -Added new cluster with 2 new hosts in VC

  -Two bunches pointing to the same NFS storage

  PROBLEM

  -When you try to turn on a computer in new cluster, I get a "requested file" "not found" error

  RESULTS

  -This seems to happen only when creating a virtual machine that has virtual disks of parent; most of our VMS is linked clones

  -When you look at the log file, please see attachment, we found the following:

  It is the location of the new virtual machine in the new host:

  /vmfs/volumes/fabdf38d-beff047d/LMW2K3/2909/002909-T_XP_SP3_32b.VMDK

  When you look at the hard, it points to the parent disk, but it seems that it does not:

  /vmfs/volumes/6586c772-53eee1bb/LMW2K3/2904/002904-T_XP_SP3_32b.VMDK

  Please note th volumen IDS are different and can not get the disc parent of the new machine.

  SOLUTIONS?

  Thank you

  Jose

  You should immediately stop using the new hosts otherwise creating new virtual machines can spoil the vmdk channels. Try http://kb.vmware.com/kb/1005930.

• RAM how much my MacBook Pro support?

  Hello fellow Mac users,.

  I want to upgrade my MacBook Pro, but I don't know how many RAM slots it has and how much and what kind of RAM it supports.

  Could someone get me noticed?

  Thanks in advance!

  MacBook Pro

  Model: MacBookPro 8.1

  Processor: Intel Core i5

  Processor speed: 2.4 GHz

  processor #: 1

  Total carrots #: 2

  (By heart) L2 cache: 256 KB

  L3 cache: 3 MB

  (Vivid RAM) memory: 4 GB

  Boot ROM version: MBP81.0047.B2C

  SMC-version (System): 1.68f99

  SerialNumber (System): C0 * V13

  Material-UUID: *.

  < personal information under the direction of the host >

  Here you can get detailed information about RAM on MacBook. MacBook Pro: how to remove or install memory - Apple Support