Hosts accidentally saved as a txt file

Similar Questions

• I open a .bat file in wordpad by mistake and saved as a .txt file and on all bat files the icon became a txt icon

  I opened a .bat file in wordpad by mistake and saved as a txt file and icon on all files bat transformed into an icon of txt. So I can't run bat files either. Simply open wordpad all the time. How can I activate this return?

  I also received a reply from a friend before subsequently I tried method 2. He found this site: http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html

  Its almost the same thing but U don't need to go into the many catalogs.

  Just download the Default_BAT.reg and run it. And restart the computer, and it works again. http://www.SevenForums.com/attachments/tutorials/168956d1312706042-default-file-type-associations-restore-default_bat.reg

  Thanks to everyone who answered my question.

  Concerning the SwedenDanny Pentecost

  I also received a reply from a friend before subsequently I tried method 2. He found this site: http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html

  Its almost the same thing but U don't need to go into the many catalogs.

  Just download the Default_BAT.reg and run it. And restart the computer, and it works again. http://www.SevenForums.com/attachments/tutorials/168956d1312706042-default-file-type-associations-restore-default_bat.reg

  Thanks to everyone who answered my question.

  Concerning the SwedenDanny Pentecost

• I accidentally saved over an important file in excel. How to retrieve the previous version?

  I need to retrieve an earlier copy of a file I've accidentally saved above.

  Hello

  Please check with the experts of the Office and Excel here: (just repost your questions)

  Answers - Excel Forums
  http://answers.Microsoft.com/en-us/Office/default.aspx?tab=4#tab=4

  Answers - Office Forums
  http://answers.Microsoft.com/en-us/Office/default.aspx

  Or

  Discussions in Excel worksheet functions
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.worksheet.functions&lang=en&CR=us

  Discussions in Excel General questions
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Discussions in microsoft.public.excel.worksheet.functions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Excel.worksheet.functions&cat=en_us_b5bae73e-d79d-4720-8866-0da784ce979c&lang=en&CR=us

  Discussions at the Microsoft.public.Excel
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Excel&cat=en_us_a09d72a4-715e-4c37-bcd5-75e0fc616b1f&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Query output to a txt file

  Hi all
  
  I have a query which output must be saved in a .txt file. Each line contains a field with concatanated data. Now, it runs in a procedure on the database that uses utl_file functions to save the file on the server. In the calendar on the server runs a tast that verifies the file every 15 minutes one moves the files in this folder in a network directory that users can access. We are migrating to a new environment, and this solution is no longer an option.
  
  I have the opportunity to create a BI with CSV report as output or create an interactive report and let the user to download output to a CSV file. But then the data are surrounded by double quotes. If it's not ideal.
  
  The solution I am looking for is: the user gets a dialog box and choose the location where he wants to put the txt file. Then the output of the query is saved to this place as a .txt file. Is this possible in the APEX (APEX 4.0.2)? And if so, how does it work?

  But then the data are surrounded by double quotes. If it's not ideal.

  The reason why most system (not only apex) join the CSV fields using quotes is because it allows the data to have a comma which otherwise, to wrongly analyse data. The file would be completely unnecessary in this case.

  You can generate files of apex anyway you want
  See this post
  Choose any file name and extension, the appropriate mime type and write data using htp.p in according to your desire format it in your file. It is very different than utl_file in the way you generate data (except the mime headers)

• FTP .txt file copied correctly the cRio

  I use the 'FTP Get File.vi"to retrieve a .txt file of my CRio, which is then copied on my host.  The file is a delimited data tab.  The file copied all the data a except that the copy has a blank line between each set of data.  These additional lines take me to read the incorrect lines when the file is read in my program later with the "reading a spreadsheet file.  These additional lines come  I checked the original on the cRio file transfer via MAX and these lines do not exist.  Can someone tell me how to solve this problem?  Thank you

  If you look at the entries for the File.vi FTP Get, you will notice that there is one that says binary:

  

  By default, this is false, which means that it copies the data in an ASCII format.  Try a real constant of wiring to this entry.  It's the need for VxWorks and Windows use different end of windowing.  This difference is probably the reason that it is adding lines to it.

• I need to restore a previously saved version of a file system windows movie maker

  I accidentally saved an empty file on a Movie Maker project that I worked on for many hours of many many.   How to restore the earlier version of the file?

  I have Windows Vista Home Premium and have therefore no shadow copies.

  I tried to click with the right button on the file and the file to restore, but he came upward in option.

  Help! (Thank you)

  Hi DCKeyser,

  Since then, family vista premium does not shadow copies, you might not be able to restore the previous version of the file.

  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  You can use your favorite search engine to search for third-party programs retrieve older files.

  Bindu R - Microsoft Support

• How to import a TXT file in my list of firewall rules?

  Good then I exported a list of firewall rules in a txt file. I then copied on some firewall rules. Then I saved the file txt and I wonder how I can re - import the txt file. Please note that I don't know of import policy...

  UH I thank you for responding, but apparently you misunderstood what I meant... When I go into windows firewall, there is an option to export the list of rules I want to know is how to re - import this list of rules in because there is no other choice... If so how do I do?

  Since I couldn't find a solution that I found something different that also works. I found a .bat file that you can put in the folder in which you want to block the program and it crashes all the exe files in this folder and all subfolders. You can even choose a fix before custom firewall rule... If any other person having this problem follow the instructions, I provide below:
  
  Instructions (found online modified by me)

  Create a .bat file, named "addfwrs.bat" without the quotes using italic text, then follow the additional instructions:

  off @echo
  REM FILE OF ORDERS CREATED BY CHARLES DE HAVILLAND 20/02/2012
  CLS
  If '%1 'is' ' GOTO: norulename
  RULENAME SET = %1
  ECHO creating/starting of firewall rules for all files with the rulename of 'RULENAME '? % *.exe
  ECHO.
  ECHO.

  pause
  Echo.
  FOR /r %% in ("*.exe") Do (@echo %%d KB
  ("NETSH advfirewall firewall add rule name =" "% RULENAME-% ~ nxG" dir = program = "% G" action = 'block' enable = 'yes')
  FOR /r %% in ("*.exe") Do (@echo %%d KB
  ("NETSH advfirewall firewall add rule name =" "% RULENAME-% ~ nxG" dir = program = "% G" action = 'block' enable = 'yes')
  Echo.
  ECHO done.
  Echo.
  GOTO: finish
  : norulename
  Echo error! -You have not specified a type Rulename - Addfwrs 'Rulename '.
  Echo.
  : Finishing
  ECHO batch finished...

  Additional instructions:

  Firewall Windows 7 works fine, but it's not easy to set up with several (very long) programs.
   
  I watched for centuries, trying to find a way to block several files .exe to Windows 7 only once; It seems that the only method was to create my own batch (windows script) file.
  I've added below for anyone to use / modify for their own purposes.
   
   
  Run the commands below (addfwrs.bat) file, will create inbound AND outbound firewall rules that block all .exe files in your chosen folder and subfolders to access internet.
  Very useful.
   
  To use:

  (1) place addfwrs.bat in the folder in which you want to block .exe programs (it crashes all the programs exe in no matter what subfolders if you can place it in a folder without any exe it blocks)
  exe in several subfolders both programs)

  (2) now run CMD as administrator.

  (3) copy the new directory (eg. c:\Programs Files (x 86) \YourProg\) where you put the addfwrs.bat file

  (4) paste it into the directory with "cd" CMD and a space before the directory (example: cd c:\Programs Files (x 86) \YourProg\) and press ENTER.

  (5) now run the batch file by typing: addfwrs.bat "rulename" example: addfwrs "BLOCK_PROGRAM_NAME_HERE".
  (Make sure there is no space in the rulename of the firewall rule, so use underscores as spaces.)

  N.B: It is important that you add a rulename firewall, so that you can identify the rules when adding to the firewall at a later date.

  (6) follow the information on the screen, he will advise you what rules he is creating.

  (7) check the Windows Firewall for new rules listed and you can then delete the addfwrs.bat file where you put it (it is necessary even if you can keep it somewhere for later).

  Quite.  Hope you find it useful, I certainly have!
  Enjoy!

  N.B: The new rules contained in the bosom of your firewall (In/Out rules), change as and when you need.

• How can I stop Windows 7 open several instances of a .txt file in Notepad?

  If accidentally, I try to open a second instance of a .txt file in Notepad, I want Windows 7 to remember that another instance is already open.

  It was, in Windows XP, whenever you tried to accidentally open a second instance of a .txt file in Notepad, you would get a message that will tell you that another instance was already open. However, it seems that in Windows 7, you can have multiple instances of the same .txt file open in Notepad (without getting any notification). It is confusing because I tend to make changes to one of these instances given, and when I save one of these cases, I eventually overwrite the changes on other instances.

   
  How can I stop this from happening? I can't turn on a pop-up message in Windows 7 that reminds me that another instance is open? Can I change a setting in my Notepad file to prohibit the opening of multiple instances?
   

  Hello

  
  Opening of multiple instances of the same file in Notepad is by design.
   
   
  Give us your comments for Windows 7
  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195
   
   
  Thank you

• Can BlackBerry 10 I create new simple text (TXT) file on 10 BB?

  Hello - I am using simple *. TXT files in the DropBox folder to create notes and sync with the computer in Linux (via DropBox).

  I can't find any method to create a new file to plain text (on sd card, dropbox,... file system folder). I can create document in the Docs To Go, but the document is saved as.doc (document ms).

  Edit and resave existing plain text (*.txt) files are pretty simple 'Docs To Go"(no problem).

  A tip?

  I don't see a way to do it. But I searched the text editor in BlackBerry World and got a lot of possibilities. Some look pretty good.

• JavaFX2.2 - read txt file as a resource.

  I should read a .txt file saved as a resource but JavaFX 2.2 doesn't find the resource 'myfile.txt' with the following statement:

  new BufferedReader (new FileReader (ReadTextFile.class.getResource("prova.css").toExternalForm ()));

  How can I solve it?

  Thank you, I solved it:

  InputStream is = getClass () .getResourceAsStream ("prova.txt");

  InputStreamReader isr = new InputStreamReader (is);

  BufferedReader br = new BufferedReader (isr);

  Follow the read file

  .

  .

  .

• Certification of material-can not find the storage50info.txt file to...

  Hello

  I had a problem when running test. He said cannot find storage50info.txt, then failed.

  2014-02-20 09:52:56 UTC... [32 m

  2014-02-20 09:52:57 UTC [February 20, 2014 09:52:56: TRANSPORT] [0] INFO: 192.168.8.150 host is running version 3.4.1 STAF [0 m...] [32 m

  2014-02-20 09:52:57 UTC [February 20, 2014 09:52:57: TRANSPORT] [0] INFO: 192.168.8.152 host is running version 3.4.1 STAF [0 m...] [32 m

  2014-02-20 09:52:57 UTC [February 20, 2014 09:52:57: HAND] [0] INFO: file is already deleted

  2014-02-20 09:52:57 UTC [0mCannot find storage50info.txt file at the location workspace/TestSessions/FC_DAS.d/Collect_Storage_Information/20140220095255.

  2014-02-20 09:52:57 UTC please make sure you Verify test runs, and had a status.

  2014-02-20 09:52:57 UTC

  2014-02-20 09:52:57 UTC FAIL

  2014-02-20 09:52:57 UTC Hash ValulesZero_Status = >

  2014-02-20 09:52:58 UTC Clone_Status = >

  2014-02-20 09:52:58 UTC vaai_plugin_version = >

  2014-02-20 09:52:58 UTC ATS_Status = >

  2014-02-20 09:52:58 UTC storage_array_mode = >

  2014-02-20 09:52:58 UTC storage_boot_device_esx1 = >

  2014-02-20 09:52:58 UTC storage_array_type = >

  2014-02-20 09:52:58 UTC storage_path_policy_2 = >

  2014-02-20 09:52:58 UTC vaai_plugin_name = >

  2014-02-20 09:52:58 UTC storage_boot_device_esx2 = >

  2014-02-20 09:52:58 UTC storage_path_policy_1 = >

  2014-02-20 09:52:58 UTC lun_found = >

  2014-02-20 09:52:58 UTC alua_followover = >

  2014-02-20 09:52:58 UTC [32 m

  2014-02-20 09:52:58 UTC [February 20, 2014 09:52:57: LOGGER] [0] INFO: log file preparation: tmp/logs/Feb_20_2014_09.52.57_9357.log... [0 m

  2014-02-20 09:52:58 UTC 1

  2014-02-20 09:52:58 UTC Test FAILED

  Thank you very much for waruwaru suggest

  I have sloved this problem...

  When I add Datacenter esxi hosts, I use IPs. So he can't find the hosts esxi by host name.

  [February 20, 2014 13:53:53: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:GetAllVMs (HostName = "esxia" password = "infocore" username = "root") returned UNDEF

  [February 20, 2014 13:53:53: VIRTUALMAC] [0] FRAMEWORK: creating new VM ESXiA-VM1-victory-lsi from scratch...

  [February 20, 2014 13:53:53: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  [February 20, 2014 13:53:53: TESTHASH] WARN [0]: found objects that need to be cleaned

• I am looking for a SIMPLE way to add my robots.txt file

  I read up on this subject. But I wasn't able to do it again.

  I found this:

  1. re: file robots.txt for sites of the Muse

  

  Vinayak_Gupta , April 19, 2014 01:54 (in response to chuckstefen)

  You can follow the guidelines of Google to create a robots.txt file and place it in the root of your remote site.

  https://support.Google.com/webmasters/answer/156449?hl=en

  Thank you

  Vinayak

  ----------------

  Once you create a robots.txt like this:

  user-agent: ia_archive

  Disallow: /.

  (1) where do you put 'head labels? Do you need them?

  I would insert it in muse that looks like this

  < head >

  user-agent: ia_archive

  Disallow: /.

  < / head >

  or just put it anywhere inside the 'head' tag

  (2) put the robots.txt file in a folder?

  I've heard this, but it just doesn't seem right.

  (3) OK you have the

  -Properties Page

  -Metadata

  -HTML < head >

  Can I copy and paste my right robot.txt info in there? I don't think I can and make it work. According to the info I found (that I posted above), the robots.txt 'file' you 'place at the root of your remote site.

  (4) where is the 'root of my remote sit?

  How can I find that?

  I read other people having problems with this.

  I thank very you much for any help.

  Tim

  I need Terry White to make a video on it LOL

  Maybe I'll ask.

  I thought about it.

  However, with the help of Godaddy, the file was not placed between theand, so I'm still a little nervous.

  It is recommended to:

  ///////////////////////////////////

  1.  re: file robots.txt for sites of the Muse

    

     Vinayak_Gupta   , April 19, 2014 01:54 (in response to chuckstefen)

  You can follow the guidelines of Google to create a robots.txt file and place it in the root of your remote site.

  https://support.Google.com/webmasters/answer/156449?hl=en

  Thank you

  Vinayak

  /////////////////////////////////////

  Place the robots.txt file to the root "of your remote site.

  and that (Godaddy) is not between the

  I checked the robot file that I created here

  New syntax Robots.txt Checker: a validator for robots.txt files

  and other than me not to capitalize

  the 'u' in the user-agent, it seems to work. When my site is analyzed, she does not miss a robots.txt file

  user-agent: ia_archive

  Disallow: /.

  Problem solved, unless I find an easy way to place the robots.txt file placed between the head tags (and better).

  I'll keep my ears open, but don't worry too much on this subject.

  Step 1) write the code of robots that you want to

  Step 2) save the file as a txt

  Step 3) contact your Web hosting provider / upload in the root of the Web site in a single file

  Step 4) check with a robot's checker that I listed above

  What was shake me:

  -where to put

  -the difference between files and folders, it seemed I would be to load a file for some reason any.

  -I was expecting something like the list of the news LOL

• I need assistance with VMware Player Manifest.txt file

  I make a program of federal work with ITT Technical Institute study. Well, we have VMware Player installed on lab computers, and on a weekly basis, I have to empty the student accounts.  Well some student accounts I can't delete, I am logged in as the administrator of the Local Machine and when I try to remove most of the accounts I get the message saying that the manifest.txt file is "cannot delete manifest.txt.2: access denied."  Make sure that the disk is not full or write protected and that the file is not currently in use. »

  and see that I have clear accounts because space is limited on these machines.  I was just wondering if any 1 can help me on how to remove this file, it would be greatly appreciated and if I have this post in the wrong section will be some 1 let me know?

  Thank you

  If the boot without failure for the administrator account and not be able to delete a file under the other user account or the account itself, there is something else wrong.

  First, I make sure that no VMware not associated with the process are running which must be in Mode safe and then I would take a look at the permissions on the file and, if necessary and or possible I would take possession in order to delete the file.  Otherwise issues that may could be corruption of the file system, in which case I would run chkdsk with the argument/f or if it's just that a file could / can be an area damaged the disk hard physics so you can test the physical hard drive with a diagnostic tool specific HARD drive manufacturing.

  Other options would be to try to remove the file from the Recovery Console by booting from the installation disc or Windows using a Linux Live OS like Slax.

  BTW is this topic on the host or guest?  If in a guest I just delete the virtual machine and replace it from a backup and if it is on the host computer, then this is not really a matter of VMware itself and it is more a problem of Windows Administration and must be treated accordingly from the point of view of the user account and or file system management regardless of the application that created the file and act accordingly.

• txt file list component

  import flash.events.MouseEvent;
  import flash.net.FileReference;
  import flash.display.MovieClip;
   var arr:Array = new Array(square_mc,circle_mc,rect_mc);
  var file:FileReference = new FileReference();
  
  square_mc.visible = false;
  circle_mc.visible = false;
  rect_mc.visible = false;
  
  function ex():void
  {
   for (var i:uint = 0; i < arr.length; i++)
   {
    // Here We are creating four eventlisteners with a function  dispNm
    square_btn.addEventListener(MouseEvent.CLICK,dispNm);
    circle_btn.addEventListener(MouseEvent.CLICK,dispNm1);
    rect_btn.addEventListener(MouseEvent.CLICK, dispNm2);  
   }
  }
  ex();
  function dispNm(e:MouseEvent):void
  {
      trace(e.target.name);
   list.addItem({label:"Square"});
   square_mc.visible = true;
   circle_mc.visible = false;
   rect_mc.visible = false;
  }
  function dispNm1(e:MouseEvent):void
  {
      trace(e.target.name);
   list.addItem({label:"Circle"});
   square_mc.visible = false;
   circle_mc.visible = true;
   rect_mc.visible = false;
  }
  function dispNm2(e:MouseEvent):void
  {
      trace(e.target.name);
   list.addItem({label:"Rectangle"});
   square_mc.visible = false;
   circle_mc.visible = false;
   rect_mc.visible = true;
   
  }
  save.addEventListener(MouseEvent.CLICK, saved)
  function saved(event:MouseEvent):void
  {
   var file:FileReference = new FileReference();
      file.save(list.label.name, "example.txt");
  }
  

  I have this code.

  I want the visible movieclips on stage to add in the .txt file when save button is clicked.

  not all moviclips only vsisble ones. Too, I want that this should be automatically saved to the server.

  What should do? No idea please.

  Help, please.

  Thanks in advance.

  URLVariables (or another object) is bound to affect your urlrequest data property and is used in the code that I showed to send data to your ASP If your asp search file POST variable/value pairs ' ed and writes the values to a text file, then everything should work.

  in the code that I have proposed, I sent you the variables, the visible_mc0, the visible_mc1... etc with values = visible movieclips names listed in the arr.  you copied the code I posted.  I subsequently modified this code a few minutes later to use your table arr.

  Here's the code without the superfluous lines:

  submit.addEventListener(MouseEvent.CLICK, sendData);
function sendData(event:MouseEvent):void
{
//use a local path
   var urlreq:URLRequest = new URLRequest ("/file.asp");
  urlreq.method = URLRequestMethod.POST;
  var urlvars:URLVariables = new URLVariables();
var visableNum:int=0;
for(var i:int=0;i if(arr[i].visible){
urlvars["visible_mc"+visableNum++]=arr[i].name;  // <- this is where i use your urlvariables to assign variables/values
}
}
  urlreq.data = urlvars;   //<- data property assign to your urlrequest
  var loader:URLLoader = new URLLoader (urlreq);
  loader.addEventListener(Event.COMPLETE, completed);
  loader.dataFormat = URLLoaderDataFormat.VARIABLES;
  loader.load(urlreq);
}
function completed (event:Event):void
{
  resptxt.text = event.target.data;
}

• Export form data to txt file

  I have created a form in LiveCycle. I need to have the data exported to a txt file. Previously, I've created a form in Word and it imported in LC. If this form has been filled out in Adobe and saved, I was able to export the data in a txt file. The form I'm working on now that I created in LC (instead of Word). When I fill the form in Adobe, save and then choose export to txt file, no data export. I have attached two forms: one that works (Unit_5_Preparate) and one that does not (assessment_template_test).

  Thank you!

  Hello

  It was a learning experience (no pun intended).

  If the LC Designer form is saved as 'static' then you will be able to export the data to a text file. If the form is saved as 'dynamic' then you won't be able to export to text file.

  See the file saved as static.

  Good luck

  Niall