Hot add RAM Option not visible

Similar Questions

• Hot add RAM through workflow

  I'm working on a workflow to change the RAM/vCPU for a VM given, ideally using hot add, and it seems to be running into a problem with the memory part. My plan is to just get something working for now, and then add the logic to treat various conditions (hot don't add not activated/VM under tension, etc.).

  So far, I have a relatively simple workflow (see below). The virtual machine in question has 2 GB of RAM and is turned on.

  

  I looked also directly using the workflow change in RAM, but it gives me the same error. I use vSphere 5.5, vCO 5.5.2 - of ideas?

  EDIT: I should mention that my test VM THAT hot add activated, it is supported by the OS, I have the license appropriate, and that VMware tools are up-to-date.

  I found the problem... it turns out that Linux 64 bit guests with less than 3 GB of RAM can only warm - add up to a total maximum of 3072MB. If you're at 3071 MB, you can add only hot 1 MB. If you're 3073, you can add warm all the way up to 20 GB if you wish.

  There is a KB for this: KB2008405.

• G5210it: hp dvd - ram gh60l not visible in windows 10

  Hello

  problem: dvd unit does not; It is not visible in computing resources

  This happens after the update from windows 7 to windows 10

  -the dvd is in the BIOS: described as hp dvd - ram gh60l

  -It is provided: it opens and closes correctly using its button

  -It is not visible in the resources of the computer

  -It is not visible in the list of devices, even if I show hidden devices (devmgr_show_nonpresent_devices = 1)

  -J' downloaded and installed the HP driver, even if it's for windows 7

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_100477_2&swEnvOid=4054

  -J' checked the 4D36E965-E325-11CE-BFC1-08002BE10318 low register - and upperfilter: never show

  so my questions are:

  can it work with windows 10?

  any clue?

  Thank you

  Hello!

  I had exactly the same problem. For me it worked with "Resolution 5" in support of Microsofts bullentine https://support.microsoft.com/en-us/kb/314060.

• If the CPU hot add/remove is not enabled

  I heard that it is possible to change the number of CPUS and memory without CPU hot add/remove the active through CLI. Is it possible to change the CPU and memory count without turning off the virtual computer to activate the CPU and memory hot add? I work in a hospital and shut down a virtual computer is not possible to activate these functions.

  Hi Eric,.

  You can enable the feature add hot power-CLI, but you will need a restart in order to reload the new configuration.

  Here you can get the detailed information in the present.

  http://ICT-freak.nl/2009/10/05/PowerCLI-EnableDisable-the-VM-hot-add-features/

  hope this helps you.

  Thank you and best regards,

  Shrikant Germain

• Manage the datasource Option not visible in the Configurator

  Hello
  
  I'm trying to set up a new data source to create a planning application. VERSION0 11.1.1.3
  
  But the optin manage datasource is not visible when I open the configurator.
  
  Please let me know how I can do this

  You can travel into space and work planning.
  If you want to go direct to http://: 8300/HyperionPlanning/AppWizard.jsp

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• WPS option not visible - Windows 7

  I have the same problem with the OP of this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-tried-using-WPS-to-connect-my-router-to-my/3c36d6b1-bb5c-4aa6-a19e-156385545e56?DB=5&page=2&auth=1

  But it seemed that the Defender did not understand the situation, so I'm going to get any easier this time.

  It is encouraged to post new question instead of digging the old ones, right?

  Here are the * normal * connect to wireless network option, I found this picture on the internet.

  

  Here is * my laptop * connect to wireless network option:

  

  My laptop is Acer E1 - 571G

  My router is TP Link WR941ND, my router supports WPS, and I've already activated it.

  I can connect other devices to the network using WPS, like my Android phones, Ps Vita, after pressing the WPS button behind the router.

  If I use an adapter removable wireless with WPS button on it, I can connect the laptop using WPS very well.

  So, here is my question, how can my laptop to connect to the wireless network using WPS, normally without the use of accessory?

  Thank you in advance.

  ' The Windows connect now, the service has been disabled' - I think that it is perhaps part of the problem. According to "Black Viper" and on my W7 PC must be on "manual". This service is part of the services used by W7 to run WPS.

  That sounds to start OK, it's a good thing. Try the configuration to "Manual" and then try to use your router WPS button to connect. It works then?

  If it isn't, try to start the service and re - try to connect by using WPS, it connects then?

  There may be other things on foot, but I believe that the service should be manual, unless there is another 'off' setting elsewhere I'm not aware of.

  end edit

  NOTE: Another place to check is in 'MSCONFIG' (start search for "msconfig", click on "msconfig.exe" in results and should open the msconfig window).  Browse the [services] tab and look for this service - "Windows Connect Now - Config Registrar. On my sound system checked. If it is unchecked, it check and click [ok], and then restart your PC. WPS works now?

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• E of CPU RAM hot add con Ubuntu

  Ciao, ho it following "problem": Add the Su macchine ubuntu (12 x 64) seems not the hot cpu delle funzionare e delle ram, nel senso che he operating system non vede nuove risorse not if production.

  googlando ho trovato di couple UN link

  http://adaptivethinking.WordPress.com/2009/07/27/vSphere-ESX4-hot-add-memory-for-Linux-guests/

  http://communities.VMware.com/docs/doc-10493

  Dove sono degli script che comes manualmente, Google way try it risultato sperato, my Reed is girano senza cold if fanno non nulla.

  I had to link sound a po' datati, a dir la Verità (sia come sia hypervisor come s.o.).

  Qualcuno ha affrontato con successo he problema? Come?

  Nelle stessa terms (esxi 5.1, virtual hardware 9 e vmtools date) Centos 6 funziona come UN orologio per i tipi di both adding. In realtà gia mi pareva che Centos/HR TR sposi meglio con vmware, don't ho una as confirmation.

  Ho dato a 'occhiata sull' HCL di vmware, the hot add della non supportata su Ubuntu 12.04 (anche altre release) e RAM... ricordavo invece che Spannplatte, AI tempi avevo ancora della 8.04 tested knew ESX 4. E changed qualcosa sex O male o ricordo (o forse avevo testato hotadd delle vCPU): Pei

  The addition has vCPU supportata e invece di caldo, comunque ti will not?

  Ciao

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• Hot add option missing from all virtual machines.

  I'm under esx4.0, with all kinds of guest virtual machines (2003, 2008, 2008r2, std, ent, x 64). I don't have the option add hot for one of these clients.  It is simply absent on options & gt; Advanced tab.  What am I misssing here?

  Thank you.

  It will show only if it is an option for the operating system for some versions it won't be there.  Also, what version of material are your virtual machines?  Must be version 7 I think.

  See this link for more information.  http://www.Boche.net/blog/index.php/2009/05/10/vSphere-memory-hot-add-CPU-hot-plug

• When you customize the bar of the add-on, separators ("" | "") are not visible. How can I remove them?

  Not only are they not visible, they are no longer selectable. They /do/ normally appear (that is, when not customize toolbars). Under Firefox Linux Mint 15 22.0 (Olivia: x 86-64).

  Your toolbar customizations are stored in the localstore.rdf file in your Firefox profile folder currently active. This XML file is difficult reading and I don't remember seeing a good documentation on how to modify. If you want to give it a try, please make a backup first.

  If the file is corrupted (or most corrupt, according to the case), you can rename or move it Firefox will generate a new one with default settings and you can start customizing from scratch.

  With the road, it actually seems that you should be able to find and remove the separators.

    <RDF:Description RDF:about="chrome://browser/content/browser.xul#addon-bar"
      mode="icons"
      collapsed="false"
      currentset="addonbar-closebutton,stylish-toolbar-button,spring,downloads-button,separator,fireshot-Capture-Button,greasemonkey-tbb,noscript-tbb,fiddlerhook-toolbar-button,status-bar" />
  

  Why give a try:

  Open your current Firefox settings (AKA Firefox profile) folder using

  Help > troubleshooting information > button "Open Directory".

  Switch back to Firefox and output

  Break, while Firefox ends his cleaning, so make a backup copy of localstore.rdf (e.g., localstore.0808) and open the rdf file in a text editor to find and change the separators of the addon ramp.

  When you restart Firefox, your changes should be obvious.

  A little luck?

• Cannot hot add memory spent 32GB

  VM 2012 data center, hardware version 8, cpu and memory hot add activated, 8 CPUs (kernel), 32 GB of RAM.

  I can add processors, but cannot add memory in desktop client or web client. If there is a limit I'm missing it. Ideas?

  

  Just a follow-up for everyone who was watching this.

  I opened a case with VMWare and they were not helpful at all. They told me to delete and recreate the virtual machine.

  I ended up having a maintenance window and was able to turn off the virtual machine and add memory. After starting up the option is back.

• Fluidity in the mode of the image is not visible in the magnification of 100% and above.

  Fluidity in the mode of the image is not visible in the magnification of 100% and above.
  It is perfect between 25% and 66%. If I disable hardware acceleration, it works but slow. Does not work with the PSD, jpeg, 8 or 16-bit. I have reset the PS. He had worked in the morning and stopped work hours despite nothing happened: I have no install or remove any software. My PS is clean, I do not use any add-on or 3rd party filter.

  
  All tips are appreciated.

  Thank you
  Gabor

  2009 end iMac i7 16 GB of ram, ATI Radeon HD 4850, OSX 10.8.3

  https://www.dropbox.com/sh/zy5gqaj0nrpr2yz/ZxgT4DBKQx

  A Mac video card with 512 MB of vram is marginal. A 256 MB card enable GPU mode to liquefy to work at all, even on the small images. The smaller image work about only works in CPU mode, make a smaller selection just the part of the image you want to distort and then start fluidity in CPU mode using the down option. It will be slow but should work. Get a stronger video card (more vram) would be the best solution.

• If the Photos are not Visible after their exportation from Photos for Mac

  Export of Photos may write JPGs invisible on the disc, if the photos are exported with the option ' file name: use the title.

  If the first affected user a title to the picture, the deleted the title text, photography will have an empty title and the exported photos will be simply named ".jpg" and treated as invisible system files.  This bug can fill the disk with lots of image files, which are not visible in the Finder, unless the hidden files are made visible.

  User bikedaveca reported this bug today:

  See discussion: exported photos do not appear in the Finder

  More in this tip of the user:

  Bug: export of Images with "file name: U title" exports the files as Invisible, if the title has been deleted

  As a precaution, keep at least one printable character in the title field, when when you remove a title from a photo, so you can see, she had a given title.

  As a test, import three new pictures, for example:

  

  The first has a title, the other had a title, but removed, the third one never had a title and watch "Untitled."

  When I select and export them with ' file name: use Title ", only two photos will be displayed in the Finder.

  The problem is, that deleting a title does not remove the title, but adds an empty title. If the photos are exported with the filename ".jpg".

  

• Adobe Acrobat 2015.016.20041 after updating toolbutton 'replace text' are not visible

  Hello

  After updating Acrobat dc 2015.016.20041 in the commentmenu the toolbutton is not visible.

  Please yiou can tell where is the button.

  for my work is important button, because I m making the text for a magazine.

  Please contact me: [email protected]

  Hi stefanf65894335,

  There are a few changes to the annotation tool. You can select the text and then right-click on it, you will get "Add a note to replace the text" option in the drop-down list.

  Refer to this thread for more information:

  'Enable shortcuts for text correction.

  Commenting tools disappeared in the update

  See also this KB doc: Annotations: Text Correction commenting Tools Update

  Kind regards

  Meenakshi