WPS option not visible - Windows 7

I have the same problem with the OP of this thread:

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-tried-using-WPS-to-connect-my-router-to-my/3c36d6b1-bb5c-4aa6-a19e-156385545e56?DB=5&page=2&auth=1

But it seemed that the Defender did not understand the situation, so I'm going to get any easier this time.

It is encouraged to post new question instead of digging the old ones, right?

Here are the * normal * connect to wireless network option, I found this picture on the internet.

Here is * my laptop * connect to wireless network option:

My laptop is Acer E1 - 571G

My router is TP Link WR941ND, my router supports WPS, and I've already activated it.

I can connect other devices to the network using WPS, like my Android phones, Ps Vita, after pressing the WPS button behind the router.

If I use an adapter removable wireless with WPS button on it, I can connect the laptop using WPS very well.

So, here is my question, how can my laptop to connect to the wireless network using WPS, normally without the use of accessory?

Thank you in advance.

' The Windows connect now, the service has been disabled' - I think that it is perhaps part of the problem. According to "Black Viper" and on my W7 PC must be on "manual". This service is part of the services used by W7 to run WPS.

That sounds to start OK, it's a good thing. Try the configuration to "Manual" and then try to use your router WPS button to connect. It works then?

If it isn't, try to start the service and re - try to connect by using WPS, it connects then?

There may be other things on foot, but I believe that the service should be manual, unless there is another 'off' setting elsewhere I'm not aware of.

end edit

NOTE: Another place to check is in 'MSCONFIG' (start search for "msconfig", click on "msconfig.exe" in results and should open the msconfig window).  Browse the [services] tab and look for this service - "Windows Connect Now - Config Registrar. On my sound system checked. If it is unchecked, it check and click [ok], and then restart your PC. WPS works now?

Tags: Windows

Similar Questions

  • Manage the datasource Option not visible in the Configurator

    Hello

    I'm trying to set up a new data source to create a planning application. VERSION0 11.1.1.3

    But the optin manage datasource is not visible when I open the configurator.

    Please let me know how I can do this

    You can travel into space and work planning.
    If you want to go direct to http://: 8300/HyperionPlanning/AppWizard.jsp

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Hot add RAM Option not visible

    I upgraded the VMs tools and equipment (v7), but do not see the option to add hot RAM.

    The attached doc shows a Windows 2003 Server operating system with the options of the virtual machine.

    I don't see the line that allows me to turn on the option.

    I have to do something else to enable the option Add Hot for RAM?

    Thank you

    You must add pwer down virtual machine initially to turn hot.

    On your second photo screen you can see hot add is disabled and you cannot change this setting only when the virtual machine is turned off.

    1. turn off your virtual computer, then change the settings.

    2. go to Options > advanced > memory/CPU hotplug

    3 activate hot-memory add to this virtual machine.

    4. turn on the virtual machine and the test.

  • The program window is not visible

    Hello. I use Windows XP Professional. Two days, I am facing a problem that when I open the files of a particular extension, it appears on the taskbar, but the current window on the desktop is not visible. I tried to maximize, minimize, and restore options by clicking on the task bar, but nothing happens. When I use the move option, the cursor changes to move the cursor and is placed on the upper left corner.

    Files opened properly until recently. Someone has an idea - please help. Thank you.

    Great! It worked. Thank you, Bruce! I really appreciate your help.

  • New folder in Windows Explorer is not visible until I press refresh

    Hello!

    If I create a new folder in Windows Explorer to a network drive (which is a DFS share) under Windows 7 Professional 32 bit, the new folder is not visible until I have press F5 (refresh). Is there a fix or a solution to this problem?

    Thank you

    Kampi

    Hi kampi,.

    You can wait for a while and do not try to rush by pressing f5, because it can take a while to showup on network drive.

    To work around the problem, you can try to disable the Client of Microsoft Networks in the LAN connection properties

    a. open management of network and sharing Center.

    b. go to the Local network connection and click Properties.

    c. clear the Client for Microsoft Networks option and check.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Vignette to locate some ppsx files are not visible in windows Explorer

    I have windows 7. Thumbnails for some of my .ppsx files are not visible in Windows Explorer, while the other .ppsx files are visible as thumbnails. I have attached a screenshot to show that 8 .ppsx files, 6 display their thumbnails while the 2 only.

    Try this option.  Open your file in PowerPoint.  Then go to the file menu.  To the right, choose Properties, and then view the advanced properties:

    Make sure that the image 'Save Preview' is turned on:

  • New folder is not visible inside my project, but displays in Windows Explorer.

    I created a new folder in another folder.  The new folder is not visible inside my project, but displays in Windows Explorer.  Also, if I try to add another folder of the same name, it rejects the action from the folder (although invisible) already exists.  My colleague can access the same file (on a drive to share) and see the new folder very well.  This error occurs if I was the only one to create the new folder or it is the creation of the new folder.  I'm new to RoboHelp and she has used it for years.  I suspect that something is not yet set towards the top right of my side.  Ideas? (I thought I posted this yesterday, but I can't find it anywhere)

    Thanks to you two.  I created the folder inside RoboHelp (9).  I didn't know about the show empty folders option, but thanks to you, I do now!  I ended up contact the Adobe Support and they had me finally get into the registry and rename the folder RoboHelp to make things.  It worked, but update the registers is not my favorite way of managing problems.

  • Windows internal scroll of the Web site is not visible

    Address restaurant offers a menu that is not visible in FireFox, but is visible and fully functional in Internet Explorer. The menu is a drop-down window contained in the web page.

    http://fifersseafood.com/menu.html

    You can transfer files to the new profile, make sure that you do not move corrupted files, however.

  • G5210it: hp dvd - ram gh60l not visible in windows 10

    Hello

    problem: dvd unit does not; It is not visible in computing resources

    This happens after the update from windows 7 to windows 10

    -the dvd is in the BIOS: described as hp dvd - ram gh60l

    -It is provided: it opens and closes correctly using its button

    -It is not visible in the resources of the computer

    -It is not visible in the list of devices, even if I show hidden devices (devmgr_show_nonpresent_devices = 1)

    -J' downloaded and installed the HP driver, even if it's for windows 7

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_100477_2&swEnvOid=4054

    -J' checked the 4D36E965-E325-11CE-BFC1-08002BE10318 low register - and upperfilter: never show

    so my questions are:

    can it work with windows 10?

    any clue?

    Thank you

    Hello!

    I had exactly the same problem. For me it worked with "Resolution 5" in support of Microsofts bullentine https://support.microsoft.com/en-us/kb/314060.

  • Not visible platform in windows update update! __Msn Messenger forces me to install it! How?

    Hello

    I'm trying to install msn live messenger 2011 and was informed to install vista SP2 first, and then update the platform.

    SP2 is finished.

    Now, the update of platform for vista I can not find anywhere.

    Need update Windows don't offer not do me?

    The link displayed in msn live messenger installation does not work, I would like to know where it points so I go manually instead.

    Help :(

    I found the update!

    He was placed in the optional folder of windows update - where other material updates/driver updates were also listed.

    Strange.

    I thought it would be listed under updates important "title". This is why I haven't found before probably...

    Thanks anyway,

    Johan

  • Folder not visible on Windows Server 2008

    shared new folder on the file server is not visible until I have update and also not disappear after deleting until I update

    I use Server2008re Windows server and Windows XP as a client Machine.
    Pls help

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Folders not visible or accessible in Windows

    I got a laptop that died and I'm trying to recover the data on the hard drive.  I used xcopy to copy the data folders from the portable hard drive which has been placed in a casing adapter external and connected via a USB adapter.  The drive of the laptop computer was Windows XP and Vista is the drive where the files were copied.  Folders are not visible through windows, but can be found using the directory command-line command.  How can I make these accessible through Windows Vista on my destination drive?

    Thank you

    Chris

    Hi Chris,

    Unlike the command prompt you order a dir on the drive? Then CD to these directories and dir to see what directories exist?

    Follow suggestion below and check with the question.

    Open the command prompt window by clicking the Start button, tap all programs, accessories and then click command prompt.

    Type the following commands:

    1 dir / ah (list all hidden file/dir)
    2. h s - r - one attrib *. * (will make all of your visible file/dir)

    Open Windows Explorer and search for if you are able to find all your files/directories.

    I hope this helps!

  • My phone fell, and I can not get Windows to start. The repair option will not work.

    Windows Vista restore

    My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

    Have you had your laptop, checked by a technician?

    If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

  • Cursor not visible in Windows Media Center

    I can move the mouse around the use of Windows Media Center and selections light up when the pointer crosses them and I can go until the pointer is over the selection. Then I can click and the selection comes up. But, as I said, the cursor is located in the backgraoud, but is not visible. I use Vista. This is also made to the Panel controol and WMC does not like a program available? Also tried to change the pointer without success.

    repair media center http://blogs.msdn.com/b/astebner/archive/2007/03/16/how-to-repair-media-center-files-and-registry-entries-on-windows-vista.aspx

  • 10 blackBerry phone not visible in Windows Explorer - post 10.3 upgrade

    I installed 10.3 on my Q10 without problem, given the mix icon and decided to install (after using the work of passports), so a number of things...

    1 mix downloaded now--but it wants to install on a f - that would be the Q10.

    2. when connected via USB (or wifi) Q10 is not visible in Windows Explorer (it was fine to the point 10.2)

    3. can we see the riders started to install, but then he restores and a 'installation failed, cannot find f' appears.

    4 is intended to flow in Q10.

    Anyone got any ideas I can try?

    Found, go to settings > networks and connections > Services connection > USB and drag it to the position USB mass storage Mode on. It will then display as an Ext. hdd in Windows Explorer.

Maybe you are looking for