Hot (HE) XP Reinstall problem

Similar Questions

• Early 2009 iMac running hot. Hard drive problem?

  Hello world

  I have an early 2009 24 "iMac. (iMac9, 1, 2.93 GHz Intel Core 2 Duo). I am currently using OS X 10.11.4.

  This problem started, summer 2014. My iMac has been in storage a year since March 2015. Here's the problem, when it started it was summer and very hot. I didn't have air conditioning. I got this iMac from April 2011. Bought from Mac of all trades. Obviously, they heat up on top, or at least this one does. The hard drive is a Western Digital WDC WD1001FALS-40K1B0, 1 TB drive.

  At the point where I was running DiskWarrior, who reported that my hard drive was running too hot. The reader otherwise verified fine and so I downloaded Fans of Mac control, looked up what the operating temperature should be for this hard drive and set it to increase the fan speed, if necessary. Now 5182 rpm, it turns the hard drive cooling fan, and he reports 127,4 ° F. The room temperature is 82.4 °.

  Now, let's move forward to this last week. I've had my Mac for storage, he had been in the garage of a friend of year-round, is his box. From the beginning it upward, it froze soon after establishing the office. I started on the recovery partition, and DiskUtility found that it could not solve problems. So I started from the eDrive TechTool Pro partition and run DiskWarrior. That was fine until the computer froze again. To reboot the partition e could not climb. The recovery partition would enter to Midway through the boot process and then hang. It's the same problem I was trying to start normally.

  So after a long day of trying everything (I don't have a disc of starting of any kind, that I still have stuff in storage), the Mac finally started in the recovery partition. I ended up having to reformat the hard drive, make a new installation of 10.11 and restoration of my Time Machine backup.

  After another day of tweaking, everything worked fine. Except the drive is always hot.

  Today, it's back to freezing on me. I started the eDrive and TechTool Pro check sensors and generate a SMART report. The SMART report verified the reader, but watch it turns slightly on the warm side. And that was with the fans to run fast.

  Then, after all that, I'll try to get an opinion on the health of the hard drive. If I put the fans for normal speed, now it is 2638 rpm and increase, and the reader is 138.2 ° F. This seems too hot for me. You can't touch the top of the computer for a long time. It is too hot.

  Run the Apple Hardware Test disk two of your original grey install set.

• P series too hot and sound card problem

  Hello

  in recent weeks, I have a problem with the temperature. The P series of satellites is much too hot, even if only the essential progs are running, the processor runs with 100% very often. Without the Task Manager (to close the CPRS) of "windows" the machine crashes several times down!

  And since I've updated the driver sound in August this year, the sound may not be performed correctly. The sound card is not identified by diff. progs. MP3 direct cut and sound blaster, during the race.
  I can't save anything! So bad!

  Hello!

  Clean the laptop? You can use spry compressed air could blow the dust from the cooling fans. So do not disassemble anything.

  Which audio driver use? Toshiba or manufacturing as Realtek? Maybe there already is a new or try again with the old driver.

  Moreover, what Satellite phone do you have?

  Good bye

• Vista SP1 reinstall problems.

  After a reinstall of the operating system Windows Vista suite break two months ago and many update including Service Pack 1, I still invited to install/Update Service Pack 1 in regular updates. I have done this ten times over the past weeks, but still keeps asking me to add SP1. I can't add SP2 until SP1 is properly included. What can I do?   George.

  Hi George,.

  Thanks for posting your query in Microsoft Community.

  I understand from your description, that you have been repeatedly given Vista SP1 update.

  I'll be happy to help you. This problem may be caused because corrupted Windows Update components.

  Refer to the suggestions of these links and update us on the status of the issue.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also refer to this link: A software update is available for the Windows Vista installation software feature

  http://support.Microsoft.com/kb/937287

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Vista reinstall problems

  my computer got a virus, I'm tring to wipe the drive and reinstall vista from disk, but seem to have a problem getting the computer to boot from the cdrom. anyone has any ideas that will help me?

  Hello

  You can try to remove the malicious software to save time, programmes of resettlement and recording of data, etc.

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _______________________________________________________________

  If that fails, follow these steps to reinstall

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would normally be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install Vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Reinstall problems

  Well, I bought my aw 17 a few years ago. Had a lot of problems with it, so I went to reinstall windows 7 on a drive I had laying around. I don't have a cd factory

  When I went to install windows, at the end of installation, I got a message saying that this version of windows cannot be installed with the existing equipment. I have restart computer and now it goes to a screen where it says windows configures for use, then the error again.i cannot go beyond this.i tried repairing windows from the windows cd, no luck.i know the recovery partition is there because I saw when I went to install windows.

  I don't have a cd to respawn, I did f8 and there is no option for repair/launch looked respawn.i also through the f12 option, no luck.i cannot enter any security mode, I get a command prompt.i have a couple house built of workstations if there is something that I can download but I have no idea what.i am totally lost. »

  can someone please help

  I did not remove all partitions, because I didn't want to lose the factory restore. My ultimate goal was to make 10. Windows, that the initial problem was that I couldn't get anything to load without making mistakes, so I tried to get a new installation and start up with windows 7 as 10 would not install.

  At the end of the day, I had burn 10 on a Flash DRIVE and do a clean install.10 loaded just fine, but I couldn't activate due to the new installation. So with 10 up and running, I could download respawn and restore the factory settings which took back me to 7 then I could upgrade to 10. so now I'm all set, just a bunch of hoops to jump through to get here.

  Thanks for the help

• Family Vista premium reinstall problems

  OK, 5 days of problems here... too many too list at this point, but... went to the pc bed was thin got up sat down and started with vista does not and computer constantly stopping finally got it to load and run all the scans without problems or viruses detected, next day vista don't would not charge to new pc still closing left and right check connections unplugged all unnecessary elements reinstalled all cards, etc.

  support and follow-up all boards of technicians using full recovery plant which kept computer stops trying to get its operation I was able to do work it does not solve the problem and then F8 not working so could not try again.

  I used the installation of vista comes with the computer cd and tried hundreds of times to do the Startup Repair and clean install... on the new facility, he keeps close to the section lines in expansion. I thought at that time I had nothing to lose so I tried the format on the c partition hoping the installation would then work, always shut down... kept trying

  Unfortunately I'm persistent and want to get the pc running again, and then on an attempt to format and install I accidentally did the wrong partition and lost the recovery partition.

  I still can't get vista install... any ideas would help at this point because I am on disability and can't afford to buy a cd of vista or a new pc and using my pc's all what I can do to occupy my time.  Thanks in advance for any help on this disaster

  "support and followed all the advice of technicians using a full factory recovery".

  "I used the cd of installation of vista came with the computer.

  For ANY questions/problems regarding the software/recovery process, contact the manufacturer of your computer.

  It is their software/recovery process, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• BlackBerry Smartphones MP3 Ringtone Creator reinstall problem

  Installed MP3 ringtone creator, then warned of the update. Tried to install the update, received the error of App World, was not available for download. I uninstalled the app to reinstall the latest version, still cannot install and now have lost fun ringtones.  What can I do? I hope not to go to the Javatek! Thank you.

  Data sheet: Sprint Curve 8330, OS 4.5.0.175, v1.1.0.2.0 App World, personal use.

  The situation is resolved. The unit had to be hard rebooted at least twice since I posted the problem.  Relocation of several apps apparently solved the problem. Thank you.

• Equium A100 - 147 Virtual Sound reinstall problem

  I read a few posts about the same problem I have, but with no definitive answer. I have the satellite A100-147 with Windows XP Media Center. I downloaded a few files updated on the Toshiba site (all for my model), including:

  acsil-xpmce-100008-en
  Assist-xpmce-10300-en
  confree-xpmce-59007ab-en
  csutil-xpmce-7211006
  Tonalite-xpmce-3221506-en
  display-xpmce-142004543
  fever disease-xpmce-2004
  Pcdt-xpmce-321u-en
  pwrsav-xpmce-70307i-en
  sdform-xpmce-2200-en
  SD-secure-xpmce-104-en
  Sound-xpmce-51005253
  Toupad-xpmce - 10001st - en

  and then: tvs-xpmce-10312-en (latest driver Virtual Sound for the A100-147)

  I uninstalled the old version of the virtual sound driver before attempting to install a new one. But as I've seen elsewhere, I get the message:

  "Toshiba Virtual Sound can't stand your computer."

  I spent all afternoon looking up and trying to find ways to solve this problem. I've since updated my BIOS (bios-550win). Not a thing I try it will work. I even deleted the references to his virtual in the registry where there was no ongoing conflict. It made no difference if.

  Could someone Toshiba please explain to me why I am told that I can not install which worked perfectly until this morning, before these updates, which are all intended for my laptop model? This is ridiculous. My apologies for my tone, but have lost hours on it, I'm extremely frustrated and you want just like it was back in my laptop (and before you ask, Yes, I tried a system restore, but that does not work either).

  Thank you

  Mac

  Hello
  I have the same problem. Please check the post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21761
  I have received no concrete response.
  :(

• Activation after a reinstall problems

  Hello, I live in the Mexico now, I bought my laptop in Los Angeles for many years. I didn't format my computer, ever. now that I've done and I entered the CD key it give me this error eventhough it's the original one. PLEASE HELP ME. I contacted Miscrosoft and they want me to pay almost $ 200 million for something I don't think I should pay.

  Division of :

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Vista-Home-Premium-activation-error-code/88d0a6fb-69a8-4C01-A566-3721d99c51d6#LastReply

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Audition CS5.5 reinstall problem

  Hi, I have audition cs5.5, which was an upgrade to version 1.5. When I bought what I needed to call adobe to get a response from code challenge to activate because there seems to be a problem with the sn for version 1.5. Adobe then issued me with the code and all was good for a few years.

  I now have a new system that I want to install this software on and once again had the same problem. I contacted the online support from adobe who were able to guide me here because they take in charge the newer versions (I also have a subscription of clouds, but as I paid for these permanent licenses I want to use them on additional systems).

  I need help here from Adobe please that you are the only ones who can legally give me a code.

  I recorded all of the software and everything is legal and paid,

  Thanks in advance

  Trevor

  Hi Trevor,

  While I don't have access to the confidential information of the user, we will see if there is anything we can do here to help.  First of all, I'm not clear why the installation asks for a challenge code any.  CS5.5 update serial numbers should not be if I remember correctly, ask a serial number legacy to validate ownership of a previous version - I think that this was done on the Web site when buying, as serial number authentication algorithms were not compatible.  Version CS5.5 should 'phone home' during the installation to authenticate valid serial number.  Only if this were not possible, usually the computer being completely disconnected, exist an alternative activation method where you would need to give a challenge code to a customer service representative and respond with the code they provide.

  If you are not able to activate the default method and must use code challenge, it is entirely the responsibility of our customer service representatives, but I suspect that they do not see those who ask more often.  If you try again and get the same answer after explaining, you can not activate using the default method, please let me know and I'll investigate more on our end.

  Thank you

  Durin

• Adobe Application Manager reinstall problem

  I removed the LR of my series of programs (from my Macbook Pro). Now, I would like to reinstall but the App Manager simply tells me that the LR 4.4 is updated. Any ideas how can I re-download LR back to my laptop?

  Thank you

  Photoshop Lightroom to hold an appropriate license so that it must be installed from Adobe Application Manager.  Proveiiit please try running the uninstaller for Photoshop Lightroom program located in Applications/Utilities/Adobe Installers.  This should then fix the current difficulties that you are having with Photoshop Lightroom poster as being up to date.

• hot backup managed user problem

  Jin
  
  A few days ago, I took the managed user my database hot backup. And then, to check if the data file are in correct mode, I ran the query:
  
  SQL > select * sauvegardΘ v$.
  
  FOLDER # STATUS CHANGES # TIMES
  ---------- ------------------ ---------- ---------
  1. NO ASSETS 6302304272 23 JANUARY 10
  2. NO ASSETS 6302305573 23 JANUARY 10
  3. NO ASSETS 6302304259 23 JANUARY 10
  4. NO ASSETS 6302305573 23 JANUARY 10
  5. NO ASSETS 6302305573 23 JANUARY 10
  6 0 NO ASSETS
  7 0 NO ASSETS
  
  
  
  And, I didn't know that all data files have completed end backup mode. But today, when I query v$ datafile_header to check the column fuzzy then I was shocked to see the result below:
  
  SQL > select fuzzy from v$ datafile_header;
  
  FUZ
  ---
  YES
  YES
  YES
  YES
  YES
  YES
  YES
  
  7 selected lines.
  
  I use oracle 9.2.0.8 on windows server 2003.
  
  
  Although the view of backup $ v shows the same 'NOT ACTIVE' because all data files.this make me very confused.
  
  
  Please give me some feedback...
  
  Kind regards

  V$ BACKUP and V$ DATAFILE_HEADER are two different views. Why confuse yourself? They are there to meet different requirements.

  V$ BACKUP is used to check if a data file is in backup mode.

  V$ DATAFILE_HEADER is used to check the header of a data file. Of course a datafile is BLURRED when the database is OPENED - independently of the question whether an online backup is running or has run earlier.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Problems to install yahoo messanger

  I downloaded a virus protection yesterday. now, I am unable to use yahoo Messenger and told to uninstall and then reinstall.
  problem, I now it is whenever I try to reinstall or install yahoo messanger, I get a long box appears telling me that I don't have permission to do so. I always go directly to microsoft so I need some advice because I have confidence in them.
  can you help me please

  Hi elaineshan,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3. the problem occurs only when you install yahoo messenger?

  Method 1
  I suggest you to download yahoo messenger and install it in the boot.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: make sure you put the computer in normal mode.

  Method 2
  Try to disable the complete antivirus, then check if you can install.
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  If the steps above fail, then I suggest you to ask your question to the forums yahoo.
  http://answers.Yahoo.com/

• I need to reinstall XP but do not have the installation disc.

  XP Home edition has been loaded on my computer at Circuit City, when it was purchased. I have a disc did not have and am now need to reinstall problems d/t computer.  How I do that? I have the product key sticker... thks!

  Chances are very good that if you borrow a disc from someone, it will be an OEM disc, which means that it will contain the pilots incorrect and all the garbage that comes pre-installed on this brand of computer.

  Do yourself a favor and save the headaches. Add the max RAM to your device and install Windows 7 Pro.