Family Vista premium reinstall problems

Similar Questions

• Family Vista premium must reinstall.

  My family vista premium OS needs to be charged and I don't know how to do this on the internet without having to pay for a new. How can I download and use my old key?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• my computer has a virus. I took it to get the virus removed and now I don't have my family vista premium there Home Basic

  my computer has a bad virus and I had cleaned it but now my family vista premium is not on that but Home Basic is. I tried to activate with the numbers on the side of my computer, but he says that's not good. His NY will not come on either. I went to the trouble and he told me to plug my speakers that have been connected

  Hello

  Take it back to the one who fixed it and demand that they fix it correctly by reinstalling correct Vista edition. namely Vista Home Premium;

  _____________________________________________________

  We cannot help you help to activate the version of vista evil with your home premium product key

  It will not work

  _______________________________________________________

  If you have no luck with the one who fixed it, you need to reinstall vista Home premium yourself or contact a computer technician known to do

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Original title: Edition Vista Home premium

  Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Hello

  Home editions of Vista have not included Fax software.

  Fax only comes with Vista business, full and firm.

  http://Windows.Microsoft.com/is-is/Windows-Vista/send-a-fax

  It is a salary for a Fax program.

  http://www.SnapFiles.com/get/snappyfax.html

  See you soon.

• cannot burn two readers do not recognize the blank cdr - family vista premium

  cannot burn the two deives do not recognize Virgin cdr - family vista premium

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• I lost my x 86 programs after reinstall family vista premium and windows 7 Upgrade on another, both are hp pavilloin, is it possible to recover them.

  I have 2 HP pavillion desktop that I lost the x 86 full programs files systems, 1 is a vista I had to reinstall using a set of discs purchased from HP, the other flag I did an upgrade from vista to windows 7. Both are 32-bit operating systems. It's very strange that the x 86 systems wet program files missing. Can someone tell me why this happened and how to get the x 86 systems back. I did the repair restoration and even did a complete reinstall with a new hard drive on windows 7. All programs go into 1 file and will work properly from there.

  Thank you, pop

  You are welcome.

  I'm happy to have helped.

• My WIN Vista Premium PC problems.

  Your help is very appreciated.

  I have a computer Windows Vista Home Premium (32 bit), with problems.

  I tried many ways, find proposals / solutions here on your web pages, but trying the they seem to not work for my pc. For example, Windows Update does not update/installation problems,

  Windows Help & Support does not work, my virus protection can't update, backup of my computer does not work and restore to a previous point does not, Mr.Fix - it installation and running Microsoft does not work on my pc. Installing a gadget/program to identify current problems of pc also does not work. So I can't find what causes these problems and errors.

  My question is now, if I install Windows 7, which is more recent, and which, during the installation removes any existing files or programs on the computer, Windows 7 run as a whole new functional Windows system, or will be, I still have these update problems and error messages? (because the programs and files are not removed during the installation).

  I am not, of course, when you go online and download the drivers updated, patches and fixes various can / will be installed on my pc. Can someone advise me on this?

  I understand that after I installed Windows 7, I can't go back to Vista.
  All the problems I have described here will be gone when the dvd of Windows 7 is uninstall Vista and install WIN 7?
  Best regards
  Karel.

  My opinion is that if you have a series of problems with your installation of Vista, you would be unwise to try to upgrade to Windows 7, you might get lucky, but I doubt it. The best course of action would be to copy all of your important files on an external drive and do a complete reinstall of Windows Vista.

  According to the description of the problems you have I suppose you have some infections, try a scan: -.

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  and may also download Malwarebytes Anti Malware (there is a free version) and run a scan with it, if your antivirus updates then you might want to install it in safe mode (press F8 at startup).

  If this clears the infections then try the fix than programs.

• Vista SP1 reinstall problems.

  After a reinstall of the operating system Windows Vista suite break two months ago and many update including Service Pack 1, I still invited to install/Update Service Pack 1 in regular updates. I have done this ten times over the past weeks, but still keeps asking me to add SP1. I can't add SP2 until SP1 is properly included. What can I do?   George.

  Hi George,.

  Thanks for posting your query in Microsoft Community.

  I understand from your description, that you have been repeatedly given Vista SP1 update.

  I'll be happy to help you. This problem may be caused because corrupted Windows Update components.

  Refer to the suggestions of these links and update us on the status of the issue.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also refer to this link: A software update is available for the Windows Vista installation software feature

  http://support.Microsoft.com/kb/937287

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Family Vista premium 32 - backup on DVD does not work

  I use Vista Home Premium 32. I can do a backup with my WD external drive but I can't do a backup with DVD + R. Disc 4.7 GB 2 h 16.  Describe step by step. Start, Control Panel, back towards the top and the center of restoration, backup files [backup], disk permissions to continue Virgin format location, DVD RW Drive (d), backup, a snapshot is created, analysis backup files, an error cannot find file (0 x 80070002). I tried troubleshooting microphone fix - it Center DVD and I got an erroe 80040154 code. Thank you, Herb

  Hello

  Please follow the steps mentioned in the article and check if you are able to run back to the top

  0x8100002F error code and or error code 0 x 80070002 when you back up files.

  http://support.Microsoft.com/kb/979281

  Also check this link for more information and troubleshooting.

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Please try to run the fix it once again by re download a new copy and check if al else fails.

  You can also use the below mentioned link to validate solutions in the Microsoft Fix it Center.

  http://social.Microsoft.com/forums/en-us/fixitcenter

  Hope this helps

• menu contextual Family Vista premium doesn't show 'open with '.

  I had to replace my hard drive and now the context menu in vista family premium doesn't show 'open with' how can I add it then I choose a program?

  I had to replace my hard drive and now the context menu in vista family premium doesn't show 'open with' how can I add it then I choose a program?

  This tutorial allows you to add open with in your context menu:

  http://www.SevenForums.com/tutorials/52833-open-context-menu-item-Add-Remove.html

  The tutorial applies to both Windows 7 and Vista.

• license for windows family vista premium 64-bit, but need to copy

  I have the license for windows vista Home premium 64-bit.  I had to replace the motherboard in my pc.
  so I had to reinstall windows, but only had a copy of windows xp from an old computer.
  what I have to buy a new copy of windows vista?

  Hello

  If vista is preinstalled, motherboards change should be done in conjunction with the manufcacturer of the computer

  preinstalled OEM licenses are tired to the original material on which they are installed

  the license dies when the computer dies

  If a retail license, you can change morherboards

  borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Family Vista premium will not allow access the USB on HP All in One Printer L7580.

  Other laptops using XPPro have no problem.

  I get the message when I try to access "HP Officejet Pro L7500 series ( \\HP0017a425d4e0\memory_card )

  Message

  "Z:\is not accessible.

  The handle is invalid. »

  Printer works as a printer. Printer is connected by Cat5 to the Linksys router.

  Laptop is wireless.

  In another physical location almost identical except that I have a new installed L7590 and access is allowed to the USB port. No portable Vista run Fine in both

  locations.

  Any ideas?

  Solution found

• Last screen family vista premium causes the update of death blue

  I am currently under the 64-bit version of vista Home premium, SP 1.  It has worked wonderfully for the sixth month, until yesterday.  The automatic update downloaded 3 updates, I installed before stopping.  After rebooting, my computer allowed me to open a session, but windows was loading blue screen of death out and forced a restart.  This continued in a cycle until the System Restore tool kicks and restore an earlier version which as far as I know just deleted updates and now everything works fine.  Unfortunately, I wasn't able to write the error code, but I wonder if there are known incompatibilities in software in the updates.  Also, should I continue to update?

  Thank you

  The solution is in this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9 If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Windows family vista premium 64-bit fails to install net framework 3.5 sp1 error code 1603

  I tried several times to install this update for net framework and have had no success at all. I searched for an answer and also failed with that as well. I thought that I have that would give a shot. It's probably something very simple, but you know how it goes with computers. I'll paste the log of the try to install net framework 3.5 sp1 below:

  [03/18/09, 02:06:23] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:06:26] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 02:21:03] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:21:06] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 16:30:20] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 16:30:23] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 13: 32:50] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 13: 32:56] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 14:32:11] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 14: 32:14] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.

  That's what the Setup log gives me after that windows is unable to install net framework 3.5 sp1. I sure would appreciate it if someone could help me solve this problem. I just bought this pc about 2 months ago and it's the first question that I lived with her. Thank you

  To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may need to work through more than one of the following methods.

  Method 1: Manually remove and reinstall .NET Framework

  To remove and reinstall .NET Framework manually, follow these steps:

  1. remove the .NET Framework.

  a. Click Start and then click Control Panel.

  b. double-click Add or remove programs.

  c. Note each version of the .NET Framework is already installed on the computer. Then, uninstall all versions of the .NET Framework.

  d. When you are prompted, restart the computer.

  2. use the Windows Installer CleanUp utility to clean up the State of MSI database for all versions of the .NET Framework.

  .      Download the Windows Installer CleanUp utility. The following file is available for download from the Microsoft Download Center: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  a. install the Windows Installer CleanUp utility as an administrator or a user account that is a member of the local Administrators group.

  b. Click Start, point to all programs and then click Windows Installer Cleanup.

  (c) in the Windows Installer CleanUp utility, remove all Windows Installer for the .NET Framework applications.

  3. restart the computer.

  4. download and reinstall all the versions of the .NET Framework that were previously installed on the computer.
  To download .NET Framework 3.5, visit the following Microsoft Web site:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en (5. When you are prompted, restart the computer.

  Note When you have reinstalled all the versions of the .NET Framework, you can use Windows Update to check for the updates of the .NET Framework.

  Method 2: Use the .NET Framework automatic cleanup tool

  This tool is not designed as a substitute for the standard uninstall procedure. You should try to perform an uninstall by following the steps in method 1, earlier in this article, before using this cleanup tool.

  The .NET Framework cleanup tool removes the .NET Framework for you. For more information about how to obtain and use this tool, visit the following MSDN Web site:

  http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx

  Note that this cleanup tool deletes shared files and the registry keys that are used by several versions of the .NET Framework. To ensure that all versions of the .NET Framework work correctly, if you run the cleanup tool to remove the .NET Framework, you must first remove all installed versions of the .NET Framework using this cleanup tool. Then, you must reinstall all previously installed versions, starting with the version number the lowest.

  Suppose you have the .NET Framework 1.1 and .NET Framework 2.0 installed on your computer, and you plan to use this cleanup tool. In this scenario, you use the cleanup tool to remove the .NET Framework 1.1 first and then use the cleanup tool to remove the .NET Framework 2.0. After you remove the two versions, you reinstall .NET Framework 1.1 and then install the .NET Framework 2.0, in that order.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• Family Vista premium HP dv6646us sleeps forever

  Hello

  When I put the dv6646us laptop computer in mode 'sleep' laptop power button flashes. After a while when I try to activate by pressing the builtin mouse pad or any key, the power button continues to blink, but the laptop does not like it should with all active programs. It seems I have to wait until the battery is discharged is about 8 hours. Now the laptop power button turns off completely. When I start the computer after you press the laptop power button the laptop starts as if I shut down the computer earlier and start again. Sometimes he gives the options 'Windows to start normally.

  Point to note: the battery is in poor condition according to HP diagnostics. I feel that we should not get this problem.
  PL
  Thank you
  Guru

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to update the chipset, graphics and other Windows update or HP device drivers and check if it helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  A Windows Vista computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode: http://support.Microsoft.com/kb/930091

  Method 3:

  Change the power plan and check if it helps.

  Change, create, or delete a power plan (scheme):

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope the information is useful.