hot sync error message: incompatible card file

Similar Questions

• Hot sync error message

  I get an error message I have a repetitive event that my Treo 755 p can not handle.  I deleted all refrerences to this event, but I still receive the message.  The error message is below. I even deleted the event from my file to archive.

  The appointment to repeat several day titled V from 2008-07-06 19:30 cannot be converted for use on the handheld. Please divide the appointment in single-day and re - sync.

  Hello

  If all your data is on the phone, you can change the sync to Pocket action replaces desktop
  How to:
  Open Palm Desktop software
  on top click left on 'hotsync' and then 'custom '.

  on the calendar management
  Select it and click 'change '.
  then choose "Pocket replaces desktop.

  hope this will help you

  Message relates to: Palm TX

• Centro Hot Sync error message

  Hot synchronizations go very well with a USB cable and Windows XP Home Edition, but I always get an error message for a single file. I never found any problem, just the error as follows.

  Database Trace of PM

  Protocol error: handheld file could not be opened. (4004)

  • SYNCERR_FILE_NOT_OPEN

  Anyone who is familiar with that?

  Thank you

  Glenn

  Answered my own question with a previous post and response. Get solves the problem, works fine now

  Message relates to: Centro (AT & T)

• error message - your backup file is not valid. It may have been deleted.

  When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

  Hello

  1. what operating system is installed on your computer?

  2. what file the error refers?

  Method 1: Start in safe mode and check if it helps.

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

  Method2: Start the computer in a clean boot and check if it helps.

  Windows XP: http://support.microsoft.com/kb/310353

  Windows Vista and 7: http://support.microsoft.com/kb/929135

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

• Try to copy the corrupted user profile profile settings and I am met with the error message "too long file name!

  I tried to connect to my laptop today and instead of recording in the usual way a message that windows creates new office settings. When he finally connects me I get a message of bubble speech saying I was connected to a temporary profile, I reboot several times and the problem persists. After a little google research, I realize my old profile is probably corrupted... I have not downloaded a new software/hardware.

  I followed the steps of miscrosoft to copy the files from my old profile to a new user, everything in the file transfer went well until the last few files to copy. Then, I get this error message saying "the file names would be too long for the destination folder", only two options are cancel and skip available. Which are useful.

  I do not recognize these folders that are too long (the names are the random letters and numbers), I tried to look for them, nothing is done. And to be honest, I don't understand what that means.

  UPDATE: I decided to copy folder a bit at a time and it solved my problem, that all the files were copied successfully. However, now I was struck with a new problem. Whenever I try to access my files, I get a message that says windows cannot access the specified device, path or file. You may not be authorized appropriate. How can I fix it?

  
  

  It comes to my laptop and I administer it / have access to passwords, etc.
  

  It simply means that your old account was the owner of that file or folder.  You can change the security to access your new account.  Here are the instructions: http://windows.microsoft.com/en-PK/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

  (It says Vista, but the steps are the same for 7).

• installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  This means what he says.  You do not have the minimum required VRAM.
  The minimum specs for the game is listed as 128 MB of VRAM, but is supposed to work
  on the graphics card integrated Intel 2000/3000.
  The amount of VIDEO memory dedicated on laptops is apparently determined by the FAB of the laptop.

  Without knowing which laptop, or if it is one that has a dedicated graphics card, I guess that your laptop uses integrated graphics that devotes too little of VRAM (64 MB?),
  If it does not the minimum requirement of 128 MB of VRAM.

• Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no p

  Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no problem. Can someone help me? Thank you.

  Is there a file .idlk remaining on the server which is not removed properly?

• Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

  Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

  You can use Windows or Macintosh to search all PDF files and start to bring together them.

• Lightroom 6 error message when moving files

  Here's my problem of Lightroom. I installed LR 6 on a new iMac OS X El capitan 10.11.3 firstly I copied my photo of LR on my hard drive internal files. I loaded a copied LR Lr catalog.ircat ir.data to the correct file, launched LR then used law imported and data files to restart LR and import all the photo files. All files photo 18010 entered single file, no subfolders showing. I deleted all the files on my hd plugged my external hard drive internal relinked all the pictures, then tempted to move files in LR, but I get on this error message.

  I can't get the screen grab to show here, but says. There was an error files to deal with the destination you selected. The following files could not be copied: (then list the files)

  Any help would be welcome and enjoy.

  I'm tempted to lr to uninstall then reinstall derivation to the hd pictures hoping that I can then move files in LR.

  I tried the above method and it works (part of work). A single folder synchronized 47 pictures, but there's another 598 photos in the folder does not display LR. On a resynce photos the 598 to sync but nothing is added to the folder.

  In the method that I advised there is no synchronization.

• Can someone help me with the error message "Creative Cloud Files folder missing"?

  Hello

  I'm on a Mac (OS X 10.10.1) and recently changed the folder name 'users' of my system to something else. I think that I followed all the steps correctly Apple to make sure that my user account name and the directory of the user are in alignment after the change. However, the creative cloud do not update the extension / address of the location to sync files. I went into the preferences of creative Cloud and saw the location of the file ' ' was still announcing the former name for the folder my Mac user. I used the dropdown to select 'Other' and then selected the folder of the newly appointed user. Creative application Cloud then began loading (presumably to restore the sync connection), but then gave me the same error again. When I return in Cloud creative preferences, the location of the file ' ' now shows the newly named good, user folder, but I still get the same error message every time I try to turn on sync. Even with the correct file shown as the 'file location', the error message always refers to the old extension / address of the location of the file.

  How can I get Creative cloud to update the address of the file? He seems to have accepted my change the 'location', but the address of the file itself has not been updated.

  FYI: clicking 'Restore' option does not at all help. It produces just the same pop-up over and over again until I got disabling sync.

  UPDATE: I restarted my computer and went through the same exact process above and now looks be it resolved itself. the error message no longer appears after that I have turn on sync. In my opinion, everything works fine now. Basically, it seems that the solution is to completely reboot your computer.

• Firefox Sync error message

  Hi today with Firefox 33.0.2 I was see an error at the bottom of the screen whenever FF is open. The message reads - "Sync has encountered an error during synchronization: unknown error." Synchronize automatically retrying this action. »

  This happens both of my laptops running the latest stable version of FF is 33.0.2.

  I am also using the latest version of sync using just a password and e-mail address to connect computers on behalf of synchronization, who has had no problems until about 3 hours ago.

  If I get the above error message, and then try to perform a manual synchronization using the sync tool the message will pass to-"Sync has encountered an error during synchronization: the Firefox Sync server maintenance is underway, synchronization will automatically resume." Sync automatically retrying this action. "

  Why I posted here because I tried the Mozilla @mozservices Twitter account to see if there is any failure or maintenance in progress, but have had no luck.

  Any help would be appreciated, thanks.

  See you soon.

  Edit-
  Hi again just thought I would add what I use FF Sync for is simply the bookmarks between 2 laptops and have never had this problem before now.

  See you soon.

  Hello Mr. News, I think that your problem was the same that the blacksmith had. There has been some work done on the affected server in the meantime. can try to restart the browser, Resync & report if the problem is still happening? Thank you very much...

• error message "missing resource file imaqdx.rc.

  With the help of LV2010, returned to a PC that has been used for a while access to some old programs of vision. On the block diagram, the property IMAQDX node is disconnected and when loading the file, I get a message that says: "lack of resource file imaqdx.rc.

  Suggestions?

  For anyone following this discussion, I have solved the error message, but only by removing all related AND then put it back. A major PITA!

• Error message: cannot open file. Eventually the file is in use, or yo have no right of access to the computer on which the file is stored, or your proxy settings are incorrect.

  I have windows 7 ultimate with media player 12. When I want to download the video (avi file) continuously, the mediaplayer opens well but as soon as the data starts streaming I get the above error message. I checked all my settings for the mediaplayer, but nothing seems to fix. Has anyone had the same experience and has managed to make operational mediaplayer? If so, please enlighten me.
  plentygas

  Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7music/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

  Original title: how to fix browseui.dll without original windows disc?

  Hello

  Well, kids, here's the deal.

  I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

  There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

  NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

  Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

  I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

  We are this:

  1. is there a way to correct this file without the disc?

  2. can I get another copy of the disk without having to buy it?

  3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

  If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

  If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

  Explorer.exe - bad Image
  The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

  From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

  Explorer.exe

  Click OK to launch the Explorer and your office must return.

  Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

  If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

  Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

  If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

  You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

  Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.