hour system of a gps receiver

Similar Questions

• Re: AT200 - gps receiver stopped working

  For some reason gps receiver stopped working on my camera (ics at200)...
  All using the internet connection of positioning works fine however.

  Is there a cure?

  Have you used a gps Utility (like 'GPS Test' or 'latest coordinates GPS') to look at how many satellites were in sight? (or opportunity)

  Have you tested the GPS feature outside under the open sky or inside a building.

  How long wait it for the vacancy?

  "Positioning while using internet ' often used completely different techniques. Google/Android to calculate the position of HotSpots WiFi known (which would have been unconsciously picked up by other android with gps & wifi active devices or streetview cars) or the cell-ID (which is much less accurate).

  The AGPS (Web support) function usually reduced ownly time until GPS is ready to provide the contact information (time to first fix). Usually these data AGPS is also valid for a week or two after you download once. (The "Test GPS" app has an option to manually request the AGPS data that makes sense only if the internet is available.)

  Get a first fix for GPS, especially if the last successful use of GPS was some time there can take a long time. So outside, which allows GPS, maintain a stable and up to 15-30 min wait may be required. 'GPS Test' or 'GPS coordinates' applications can be used to observe the status of the fact receiver. Usually satellites should appear almost immediately, but the GPS takes a few additional minutes until. This is the time required to download Almanac data and satellite ephemeris. (If not already obtained by an AGPS function).

• Toshiba supports the of NAV4ALL GPS receiver?

  My brother's toshiba fan and he would like to buy a gps receiver to make a project with his friends.

  He thinks that a brand name is Nav4all is nice, because it costs too much, only 70 euro. compared to other brand, it's really nice price.

  But he wondered if this GPS receiver can take over his computer toshiba laptop or not.

  Any idea?

  Hello

  receiver GPS of Nav4All seems to be a normal Bluetooth device, so it should work.

  Good bye

• Cannot pair Bluetooth with wireless GPS receiver

  Hello

  I just bought the software Garmin Mobile PC with a wireless GPS receiver. My computer which is the another OS XP manufacturer, who has the Toshiba Bluetooth Stack in it.

  The Bluetooth Manager is the Garmin GPS receiver, but not pair the two together. When I open the software so that it can find the GPS receiver, happening in Bluetooth Scan mode and just glue here until it times out with error message: "TOSBtMng.exe has encountered a problem and needs to close. We are sorry for the inconvience. Garmin technology and I was on my laptop and downloaded manufacturer site the patch/update, is always the same.

  Can someone help with this problem?
  I hope I gave enough information!

  I guess you have the original available your PC bluetooth stack. So I would try the following:
  -Install the last battery Bluetooth bluetooth Toshiba website:
  http://APS2.toshiba-tro.de/Bluetooth/
  -Configure your GPS device by using the "Custom" of the "Bluetooth settings" Mode
  -Remove the battery Bluetooth, but answering the question if the configurations of the device must be removed as well with 'no '.
  -Now install the battery Bluetooth that came with your PC again.

• my computer crashes when I try to connect the usb gps receiver

  My usb gps receiver works well on vista, but blocks the computer under windows 7. I'm hoping to use it with Navigator 10.

  Minidump showed a DRIVER_OVERRAN_STACK_BUFFER (f7) caused by the ser2pl.sys file.

  The ser2pl.sys which seems to be dated February 1, 2007, should be updated a driver compatible with Windows 7 if possible.

  Ser2pl.sys seems to be a driver for a USB-serial converter.

  You can find an updated driver for this device?

  There is an updated driver in the following (PL2303) link that can work according to the device:

  http://www.prolific.com.tw/Eng/downloads.asp?ID=31

• Palm TReo 700 w/GPS receiver

  I was told that I need a GPS receiver to use my palm Treo 700 p with Sprint by Navteq navigation. What does exactly. I am told that the 700 does not have an internal receiver so I need an external. Help.

  Hello PSandlin162 and welcome to the forums of Palm.

  I don't remember ever having the ability to use Navteq on my Sprint Treo 700 p.  (I bought it the day of its launch and Navteq may not available at this time).

  That said, you are right, there is no internal GPS receiver in the Treo 700 p or Treo 755 p.  To work around this problem, I bought a kit GPS Bluetooth Palm.  You can find the current model in the "Accessories" section of the Palm online store.  If you want to use this option, I highly recommend that you update your Treo 700 p to the latest version of softare available, which should be Treo700p - 1.10 - SPNT.

  You can learn more about this update here.

  Alan G

• Wrong time current GPS receiver while generating signal GPS with GNSS Toolkit

  Hi all!

  I have a problem with the generation of GPS signal. As he has shown in the current schedule to the receiver time differs from time current GPS week on niGPS Live Streaming Generation.vi

  Time initial GPS set to 0, so I expect the current, while production should start at 0:00 December 6, 2015. But the receiver poster 23:59:40 12.06.2015 start

  Could someone explain to me what can be wrong?

  That's what I was talking about yesterday.

  Time of receiver watch hour UTC

  Is time on GPS Live Streaming VI GPS.

  GPS Time - time UTC = 16 seconds (Leap).

• force the use of an external gps receiver

  I can force my rx5940 to use an external gps for tomtom navi and/or any other program installed navi

  The built-in receiver is too slow

  Brian

  exactly what I needed thank you will try

  Brian

• Hour system P100-102 is always changing

  Hello

  I bought my P100-102 new several days ago, when I started first time system was not correct, so I don't correct them in Windows and after that, I took a look in the bios and changed the time there also. But everytime I restart and sometimes even without having to restart, it changes the time system in windows. I'm pretty nervous on this subject. The CMOS can not be empte this laptop is absolutely new.

  Someone had the same problem? Well I did a bios update now and hope this will fix it.

  Hello

  If the CMOS battery is empty, the data and the time will be deleted.
  To charge the battery to connect the AC adapter to the laptop.
  After the common battery was fully charged then the laptop began to load the CMOS battery.
  In this case, it would be a good idea to leave the AC adapter plugged in for several hours

• Hour system Tablet back about three hours every morning in Sony charging station at night

  Issue started after the recent update of the system.

  After the last update system for Xperia Tablet, time system returns approximately three hours every morning (left in Sony charging during the night). I have the internet connection and automatic time value selected.

  Have turn off the shelf and have it display the correct time.

  
  

• Hour system malfunctioning after VPN - Windows XP Pro 2002 Service Pack 2

  According to group policy, my system time is synchronized to the server of my company's time.
  I can't change the time server.  Not really sure where to look; It does not appear under properties of the time, in any case.

  When I'm at work on our local network, my time is set correctly.  I can reboot, and everything is good.

  When I'm at home or on the road and I have VPN into work, my time is correct until I restart.
  After that I reload after a VPN session, my time is apparently on GMT + 0 (+ 4 hours where it should be).

  My zone control reveals that he is always set correctly (GMT - 5 w/DST + 1).
  If I run "net time" in both cases, I get the name of our time server.

  Any help would be appreciated.

  Hi Nailhead33,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to domains and virtual private networks, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://TechNet.Microsoft.com/en-us/default.aspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have the same problem as the guy from the system restore, however, I received a notice that a prgram wrote a file in the box use windows for virtual memory

  one of such custom of norton of the tip allow the system restore work. tried to uninstall norton online and it locksup after, uninstall the type selection screen. neither work. also it locksup in normal mode, please wait screen after logo & carillon.

  Hi Terror64,

  1. what you trying to accomplish?

  2. Why do you want to do a system restore on the computer?

  3. What is the exact error that you receive when you perform the system restore?

  If you want to uninstall Norton from the computer then use the removal tool using the link below.

  Download and run the Norton removal tool to uninstall your Norton product

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• hour system in Event Viewer

  All looking for errors in my event viewer I noticed that the system time reported is of 8 (eight) hours offshore and after additional research before October 31 the time differential was seven (7) hours. You will notice the time of the error displayed below report appeared during the validation of this query. So how my time of report can create time that has not yet happened?

  William

  Log name: Application
  Source: Application Hang
  Date: 15/11/2015-20:43:27
  Event ID: 1002
  Task category: (101)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: William-PC
  Description:
  The program of IEXPLORE. Version 11.0.9600.17937 EXE stopped interacting with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.
  Process ID: d54
  Start time: 01d1202936398fc6
  Time of termination: 22
  Application path: C:\Program Files (x 86) \Internet Explorer\IEXPLORE. EXE
  Report ID:

  The event XML:
  
   
     
      1002
      2
      101
      0 x 80000000000000
      TimeCreated SystemTime = "" 2015-11 - 16 T 04: 43:27.000000000Z "/ >"
      53293
      Application
      William-PC
     
   
   
      IEXPLORE. EXE
      11.0.9600.17937
      D54
      01d1202936398fc6
      22
      C:\Program Files (x 86) \Internet Explorer\IEXPLORE. EXE
     
     
      55006E006B006E006F0077006E0000000000
   
  

  You are welcome

• BlackBerry Smartphones help: how to use BB Bold with external Bluetooth GPS receiver

  Hello, I need help after 3 weeks of research.

  I use a "BOLD" BB on Proximus (provider in Belgium) but without BIS or BES.

  I need to use the GPS function, so I buyed a Bluetooth receiver. This function works after matching "BOLD", but I'm looking a sweet or maps to use my BB as a GPS (TOMTOM, GARMIN or other).

  Do you know if it is possible without the data (BIS or BES) service and if so with what software or maps can I use GPS.

  On the other think, can I have the BlackberryMaps on my "BOLD". I had a curve and worked this function to display maps.

  Thanks for your help.

  Llila

  Hello

  I'm sorry but I tried to install the Google maps software, but it does not work.

  I installed give hoe GPSed me the position and the time from one point to another, but there is no mapping.

  My problem is a problem of mapping because that on Blackberry, they give only the possibility if you are connected to the internet when your gps works.

  I'm looking for a program that use maps embedded on the card micro SD for my "BOLD".

  Thanks in advence for your help.

  Xavier

• Since the early hours of Saturday, I have received no email, when I try to send to my address from another source, I get the error message

  Ive suddenly stopped to receive emails. Strange, so I sent my phone myself, got an error message and no email received.
  Im not sure this forum will be useful because I can't receive emails

  And, if you don't find yourself able to read this, what was the error message?