House of memories Play do not convert the FH on Standard DVD video

Similar Questions

• ChnLinGenImp do not convert the value of units

  Hello

  I use the ChnLinGenImp command in a creation of such as channel below.

  --> Call ChnLinGenImp(SpecChannelName,length,SpecNumber*1,0,Unit)

  The question that I am running, I run the script for a conversion unit that converts the units if they are incorrect.  However the part convert does not convert the IMP channel, because it is a path of IMP.  Is in any way around that in addition to going to the ChnLinGen command?

  Hello J,

  Only two options I know in tiara 2012 are:

  (1) give and make a meaningful string instead of an implicit string and let conversions of unit of the tiara to manage all

  (2) manage your implicit channels separately and re-create them whenever there is a change of unit - but you have to manage the offset and the conversion factor

  For the linear unit conversions as degC to degF, I could imagine DIAdem running automatically on the offset values and factor of the implicit channel, BUT not all unit conversions are linear, and there must be able to operate on the values of the channels - you can not apply a non-linear conversion to a y = mx + b equation and get another y = I x + b' equation.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• I can not change the type of standard user to the admin account.

  I had a very difficult time, adding new accounts to the system.  Now that I have, I can not change the type of standard user to the admin account.

  As you don't declare that you tried, I am unable to say where you went wrong. Here is a method to promote the accounts without going through the various GUI screens:
  1 restart in SafeMode with network.
  2. log on as an administrator.
  3. click on start.
  4. type the three letters cmd in the search box.
  5. press on Ctrl + Shift + Enter
  6. click on "run as Administrator".
  7. type the following commands and press ENTER after each:
  NET user
  (This will show you all existing accounts)
  net localgroup administrators 'xxxx '.
  (This will encourage user xxxx to Administrator status. Replace xxxx with the correct name account).

• iMovie imported my clips but did not convert the

  Hi all.

  Recently, I imported a whole bunch of my GoPro clips in iMovie. They seemed imported ok, but when I drag them from the event in the project and then decide I want to make adjustments of speed in clip adjustments, it is said that the clip was not converted - see attached screenshot.

  In addition, displaying some of the clips, some of them do not see smooth, the video will be trolling heavily but audio will continue. This will be resolved once that I convert the clip but it's a bit frustrating when I have to drag the item from the window of the event in the project window and then convert it just to see if I want to use it or not.

  The clips can be converted singularly but takes a while. I was wondering if there was a way to conversion in bulk the clips so that I could just let it run all night and she'll do all clips at once. I have searched through the toolbars, but found nothing. It is mostly just then preview or watch clips or if I want to make adjustments of speed/run the clip towards reverse.

  I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

  Any help anyone could give me would be much appreciated.

  PS if possible, I don't want to reimport them since I already moved half the clips I want in my project.

  Additional information:

  Computer: MacBook Pro 13 ", about six years, running the Version OS X El Capitan 10.11.4

  version of iMovie: iMovie ' 09, version 8.0.6 (821)

  GoPro used: GoPro Hero4 Silver

  

  I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

  Were then automatically using El Capitan, or a previous operating system?

  There are many reports on these forums that suggest that worm iMovie 8 and 9 are not compatible with El Capitan.OK on previous operating systems

  Even if you convert the clips there may be other issues.

  The recommendation, if you have problems with the 8 CBS NVA, is to download iMovie ver 10 from the App Store.

  It is not free for users of version 8 it is for users of version 9.

  Version 10 is quite different from 8 and 9 so a bit of a learning curve.

  Do a search here for compatibility with El Capitan iMovie for more information and look for entries of GeeD is the current master

  for iMovie 10 and how to get your events and projects in iMovie 8/9 to iMovie 10.

• Sound sound record play will not activate the sound

  the icon of audio on the screen and on my computer are cut and every time I press on it is not turn the sound back on. What should I do?

  Hello

  I see that you are unable to reactivate sound.

  Do not worry! I'm here to help.

  You did changes to the computer before the show?

  Let's try the following and check if it works:

  Method 1:

  You can run the troubleshooter Audio playing & check if this solves problems.

  Open the troubleshooting of Audio playback

  Method 2:

  You can try to download & install the latest drivers for sound card on the manufacturing site & check if the problem persists.

  Reference: update a hardware driver that is not working properly

  Hope the helps of information. Please post back and we do know.

  If you need assistance regarding Windows please keep us informed.

• His editing plays is not in the new CS5/s

  Hi people,

  I use first Pro CS5

  For the first time what works on a new project all the clips during the preview in the source monitor's search and his works.

  When any clip/s are done sliding on a timeline, they do not play the sound even if the audio monitor shows his is crossing.

  The video clip both its sound appear on the timeline.

  I tried setting up of several new projects, and the same thing happens.

  Hardware audio settings see the default 'First Pro WDM Sound' and 'ASIO Setting. "

  If I import the music again the same problem occurs.

  All audio tracks are set for stereo, and there is no mono soundtracks.

  I checked the previous projects and the sound works on timelines and parameters of audio material is identical.

  Any suggestions on how to fix would be greatly appreciated.

  Barry

  1 waveform is in the timeline

  2. the sound is not muted in the timeline

  It is strange that the sound plays all the clips in the source Panel but not on the timeline in all new project.

  Also sound on any project previous plays on time lines so I was wondering if a reboot will sort problem.

  In any case, I rebooted the computer and erased the media cache as suggested. I also copied clips folder in a new folder and re-imported a few clips of test and they all work very well.

  I tried to use original excerpts in the new timeline (not those reimported) and they also work very well.  All the clips in the original timeline will play without sound still the timeline looks identical in all ways and settings.  As it is strange.

  Welcomes any other suggestions or thoughts on what is the problem with the timeline would be interesting.

  In any case very well thank you anyway for the quick response.

• Publication in Captivate v9 plays is not in the custom size

  Hello

  I have created and published a draft to 950 x 560. I have published swf and html5 and it reads in the correct size window. I then saved the project under a new name and edited and published again, but it's playing to 100% and not to the size of the window. I compared the two .htm files and we have the correct settings - "Captivate", '951', '591', '10', '#CCCCCC'). The other shows 'Captivate', '100% ', '100% ', '10', '#CCCCCC');

  I can't find something different in the publication settings. Can someone please?

  Thank you

  Are - what you happened to select scalable HTML perhaps?

• Videos inserted into the slide, but do not play is not in the browser. I use (1020 HD) MP4 videos from 1.5 MB to 3MB.

  I'm new to version 8 of Captivate reactive and has created a course which with little video files. These videos are in .mp4 (HD 1024 format) version. When I visited these video files in Design view - they play in preview mode. However, the video files are not rendered when I check on mobile devices. I'm doing something wrong?  The steps I am following to insert videos are:

  1. Select multimedia > video

  2. resize the video to adjust the sizes

  3 switching AutoPlay

  Copies of these videos are created in the folder of vr when SCORM' ed. Still, it is not visible when check it on Chrome or the native browser tab or ipad. Help, please.

  Agree with Anthony. you need to test not only the project, but the MP4 itself from a Web server if you experience these symptoms... Ideally the same Web server you deliver the content of.

  Some Web servers are not configured correctly for the delivery of media (i.e. ' MIME Types'). Otherwise, if properly Setup, the media will get on the desktop...

  To verify that the first

• Audio does not play is not on the timeline in CS4

  Hi everyone, Sub: Audio not playing is not in AE CS4.

  I am trying to create a video with audio in AE CS4. It must be synchronized average little by little, to say voices to be mapped with the video/animation sequence.

  But im getting a huge problem here, my video works but my audio does not work I can not hear audio at all... I tried to import the audio into mp3, mp4 and wav format but no solution I am facing the same problem. But outside the CS4 audio exhibit very fine, I even used many device to test audio everywhere as the audio works fine... and my hardware (Sound) system are up-to-date.

  I browsed google and tried all sorts of solution here but no use. I used numpad + 0 for voice, but whenever he starts from the beginning as a ram preview. It is difficult to adjust the voice between the two / sync make exactly. I changed the settings by going into preferences and exit but no use

  I seriously need a solution... or I want to know CS4 is better or not or cannot be used for creating object. I feel better for me change, author it and fast.

  Please guide me on this problem, thanks in advance.

  Concerning

  Sunder

  That AE can do for you, it's literally a RAM Preview. You can just use space because only you will get a preview of the video. A preview rather RAM to hear the audio. In the Preview Panel, there is a checkbox indicating "to present" check that so that when you do a RAM preview it would start the wherever is your current-time indicator. Just so place a second or two before are to be synchronized.

• Audio widget plays do not when the site is online.

  I use audio widgets with mp3. All play when published to the catalyst for business but do not play when published on the online site.

  Business Catalyst: tomandandy

  Online site: tomandandy

  All MP3s are present in the current folder to the host server.

  Permissions problem?

  Thank you.

  JB

  Thanks for the quick response!

  I just solved this problem. It turns out that Mp3 were not playing on uppercase due site in the names of files online.

  Changed the names of files to include only lower-case letters and it worked!

  Thank you!

  JB

• Premiere Pro cc plays do not in the timeline

  I just started on Premiere pro CC and that is what makes no sence I

  I have an iMac and my movies are on a USB hard drive

  I import some little clip and the film now is about 3 minutes.

  (1) when the helmet is pluged - I can hear sound... Sometimes, when I disconnect the headphones I can both see and hear the movie. Sometimes I can't see the film and hear it.

  (2) sometimes the film would not begin to play when I hit the SPACEBAR on the keyboard.

  Can someone help me out here? Is this a bug. This fact happened when I used Premiere Pro cs6.

  Apply the update that was released today. It includes improvements in the interaction of Premiere Pro with audio drivers on Mac, this might solve the kinds of questions that you are a statement.

• Effects don't play no not in the timeline? Captivate 5

  Hi all

  I'm relatively new to then sometimes Captivate and I forgot the unlikely to overlap nuances and prevent me from doing something that seems like it should be obvious, so here is my problem:

  I'm clicking on a picture I imported to a slide in Captivate 5. Then I right click and select 'apply the effect '. I chose the one I want, and it shows in the chronology of the effect. I press 'live preview' (I think it is interesting to note that the 'play' button is not an option, just "live preview") and it shows me what I applied very well. Ok.

  Then I'll return to the film display, press play on the timeline, and none of the effects play. Things just sits there (apart from the slide transitions that play).

  They play if click "Preview of the project", but not if I'm just playing a slide or attempt to read the timeline. I check to make sure that they are "turned on".

  Any tips?

  Thank you!

  Hello and welcome to the forum,

  The play button on the timeline is like scrubbing the playhead or slide Preview. Contrary with the preview of other options (like project, next 5 slides, from this slide) there is no compiling a SWF file in this case. This is the reason why you don't see game effects, even if you had an inserted Flash animation, he would play. The team created the live preview in the effect controls panel to allow you to see the effects on the object while editing. To view all the animations on a slide, you must use one of the other modes of preview.

  You may wonder why you should use the play button on the slide? It is mainly used to check and correct the timeline, as in sync with the audio.

  Lilybiri

• YouTube Video plays do not on the Mobile Site

  I built a small site in Muse to have people watch one of our short videos. It works fine on the desktop site. However, on the version of mobile, I get the following "please connect display this video", it is on a black snow video in YouTube. The site is www.huntllc.co Please Help!

  Can you try changing the privacy settings on your mobile phone?

  Edit the privacy settings for your video - YouTube help