How a listener function can broadcast that she has completed the

Similar Questions

• The program I use is called Defraggler is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation

  The program that I use is called Defraggler, it was created by piriform LTD and it is a simplified version of windows Disk Defragmenter. It is not defragment my disk correctly. It is said that it has completed the defrag but it's still 23% defragmented files defragmentation. I pressed defrag again and again but he still took no action and said always full defragmentation when clearly there is no. I myself had a look at the options and settings and it should properly according to them. Any help will be kind of you. Thank you.

  http://Forum.Piriform.com/index.php?s=6f56df458b93b49ff84c76f6fcd13a05&ShowForum=19

  Kindly repost of Piriform Defraggler forums for help with their programs.

  http://docs.Piriform.com/Defraggler

  And read the Defraggler troubleshooting, info etc. at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  You might try the Disk Defrag at the link above instead of Defraggler.

  See you soon.

  Mick Murphy - Microsoft partner

• IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

  IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

  Hi, Slkdogg1.

  Please visit Apple support communities.

  I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

  If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

  Solve the iOS update and restore error in iTunes

  Resolve alerts related to USB in iTunes

  See you soon

• How to display a hidden shortcut that is pinned to the Start Menu?

  HIDDEN PIN TO THE MENU SHORTCUT START

  How to display a hidden shortcut that is pinned to the Start Menu? This problem occurs very simply but does not quite simply. I've pinned a shortcut to the Start Menu before you uncheck the hidden attribute (knew I had) causing the shortcut to be recorded without being visible. When I tried to pin it again I was alerted to his presence by the fact that the second pinning made an extension of title (2). When I tried to change the title, I received the message that a link of this title was already present. I don't want to stay as a situation lasting this is why I need instructions on how to change it. I could just change the title of the second pinning something close but different but then I would have two shortcuts to the same program pinned on my Start Menu, without being able to be removed. I just * because if I can tell. I could uninstall the program and then run another program looking for broken shortcuts to 'fix' and then (I guess that means deletion when they can't be 'fixed') but I would like to avoid the extra steps for pedestrians to the advantage of learning a new technique of Windows if such jurisdiction exists. Could use this help as soon as POSSIBLE. Thank you.

  C:\Users\\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\User Pinned\StartMenu

  Just tested myself and my shortcut is there.

• How to listen to changes in components of child in the parent MXAdvancedDataGridItemRenderer

  How to listen to changes in components of child in the parent? I won't listen to the < s:change > to events triggered in each of the three components

  < s:MXAdvancedDataGridItemRenderer >

  list change ot here events->

  
  < s:DropDownList x = "0" width = "120" dataProvider = "{DataUn}" id = "ddl" labelField = "name" >
  < s:change > /pas in there
  < / s:DropDownList >

  "{< mx:DateField id ="midYearReviewDate"ToolTip = 'Mid year review date' selectedDate="@{data.midYearReviewDate} ' = '125' XY '0' = >
  
  < / mx:DateField >
  "{< mx:DateField id ="endYearReviewDate"toolTip = selectedDate="@{data.endYearReviewDate ' year review end date "}" x = "222" >
  
  < / mx:DateField >
  
  < / s:MXAdvancedDataGridItemRenderer >

  Take a look at the documentation here: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/events/FlexEvent.htm l #DATA_CHANGE . By default, bubbles is set to false for DATA_CHANGE.

  In any case, add listeners for events within an element make as is generally a bad idea. Flex will allow to recycle a renderer instance only element to display several rows in your datagrid control. What you want to do is rather to add an event listener in the parent who answers to a custom event, that leave you the room from your rendering engine inside.

  So in your parent, you should have:

  public void init (): void {addEventListener ("myEvent", myHandlerFunction, true)};

  and then inside the rendering engine:

  change = "{dispatchEvent (new Event ('myEvent', true, false))}" / >

  change = "{dispatchEvent (new Event ('myEvent', true, false))}" / >

• I received a call from a woman said that she was with the ICC with Windows service provider and that they were getting the error messages from my computer

  * Original title: scam or not

  I received a call from a woman saying that she was with the ICC with Windows service provider and they received my computer error messages and I wouldn't be able to help me solve it.  I asked for a number of 800-373-4609 because he came unknown on my phone.

  I wanted to open my computer.  I told her I would call her back.

  Is it a scam?

  (Moved from P & M)

  Yes, it's a scam. When someone calls and says they need to talk to you about 'mistakes' in your computer, simply hang up.  I just had one of these calls myself about 15 minutes ago.

• I have Mozilla Firefox on my computer and I am trying to go to a Web site, it tells me that Windows has blocked the Web site.

  Original title: Windows has blocked a website!

  I have Mozilla Firefox on my computer and I try to go on a site that I need to go to desperately for school work and it tells me that Windows has blocked the Web site.  How do the Web site and how to unlock the problem?

  Hello
   
  1. what happens when you visit the same Web site using Internet Explorer?
  2. what operating system is installed on your computer?
   
  Given that it is a problem with Mozilla Firefox, you can contact Mozilla for better assistance.
   
  Here is the link: http://support.mozilla.org/en-US/questions/new
   
   

• I have photos on a CD burning problems. I jumped in the CD to try to burn a cd, but it keeps telling me that it cannot complete the format.

  I just down 144 loaded on a picture of a CD. I saved them in my photo files. I popped in a cd to try to burn a cd, but it keeps telling me that it cannot complete the format. If anyone can help. I've never burned a cd in my life. I use Windows Vista Home Premium.

  original title: need help to burn photos to a cd.

  Perhaps the following links will help you get started:

  Windows Vista - Burn pictures or videos to a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

  Windows Vista - burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Windows Vista - which CD or DVD format should I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Windows Vista burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• With rendering problems. Rendering started taking 10 times longer. I have pleanty of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  With rendering problems. Rendering started taking 10 times longer. I have a lot of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  I determined the cause. Damaged media. Copy old sequence in new chronology cross me if I return after any change in the timeline. I am able to export own media. No change to hardware and software recently. I'm running Windows 10. (Hatred, dating back to 7)

• I had A RUNDLL error in the middle of working on my moms computer the other day, this is: C:\Program files\common files\paretolic|uus2\uus.dll specified file not found someone can help? She has a dell computer that runs on XP

  I'm willing to try to fix it with help.

  The file belongs to the ParetoLogic data recovery software. If you have uninstalled this program, a reference has been left in the start. You can remove it as follows:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  If your mother uses this software, uninstall/reinstall. MS - MVP - Elephant Boy computers - don't panic!

• I think that she has damaged its registry to the Windows Activation. Error 0xC004E003

  Recently, I changed the hard drive in my Dell bosses. I know that Windows is trying to re - validate after a few hardware changes, but he never asked for this info so I guess he didn't need to.

  Other day windows has been updated and kept 3 restarts back to back. She is eager to work and held down the power button to stop the updates. When it restarted, it says Windows is not genuine.

  I thought it was related to the chance of hardware, but for some reason that I can't activate by phone that I usually do for this. Instead, it looks like:

  

  I tried "Type a different product key" and I get:

  

  When I go to http://www.microsoft.com/genuine/validate/ and run the downloadable program (it says that my browser cannot do and gives download) it says "Welcome to windows. Because you are real Security Essentials Free trial... "but when I go back to slui.exe he always wants me to enter a correct validation key.

  I tried many commands via cmd slmgr and somewhere I think it did activate windows. There is no warning lower right of my screen or when I connect. However slui still say that I need to activate.

  I think when she forced stoppage that she screwed up a register which is not settled by removing the key and product reactivation. Is there a way to reset these registers then reactivate?

  Microsoft Genuine Advanced Diagnostic Tool gives me this info:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-*-*-*-733WD
  Windows Product Key hash: J8bZA6mhcZqo/1ndlXzMli4JtGo =
  Windows product ID: 00371-OEM-8992671-00524
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {715EB4C8-F388-4E1A-91E8-AEB5435BCB0E} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150202 - 1526
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {715EB4C8-F388-4E1A-91E8-AEB5435BCB0E}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BATH00371-OEM-8992671-005242S-1-5-21-1249742011-2398018497-2747636529Dell Inc.. PRECISION M6800 Dell Inc.. A11 20141120000000.000000 + 0003BEE3207018400F404090409Time(GMT-08:00) Standard Pacific13DELL CBX3 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700524-02-1033-7601.0000-0782015
  Installation ID: 010655226753445496285115400592491291668534339223019566
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 733WD
  License status: initial grace period
  Time remaining: 43200 minute (30 day (s))
  Remaining Windows rearm count: 2
  Trust time: 19/03/2015-12:09:45

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:19:2015 12:09
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: NAAAAAEAAAABAAIAAgACAAAAAwABAAEAln3cG836Nm9YAsTZNN6KJZ7Uwv1CqxDwjCjI9g ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL CBX3
  FACP DELL CBX3
  HPET DELL CBX3
  MCFG DELL CBX3
  DELL CBX3 FPDT
  CBX3 DELL SLIC
  LPIT DELL CBX3
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  ASF! INTEL HCG
  MSDM DELL CBX3
  LAURENCE INTEL HSW
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  then try to enter the product key by using the following command:

  Click Start, type: CMD

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Leave the command prompt

  Restart your computer

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to remove a domain controller that was removed from the Internet works but not demoted

  How to remove a domain controller that has been remove from the Internet works but not demoted

  got two domain controllers and been deleted but not retrograde

  can help pls

  Hello

  Your Windows is better suited for the directory on TechNet Services. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-us/winserverDS/threads

  I hope this helps.

• How to add ActiveX controls so that they appear in the list insert ActiveX

  HR 2015, how can I add that activex dll to the list of available ActiveX controls so that the custom DLL or OCX is listed on Insert... HTML... JavaScript... ActiveX controls dialog box?   Where does get this list HR?

  In my view, that it is a list ActiveX controls that are installed on your system. Add on, install the corresponding application and it should appear in the list.

  Please note that ActiveX is outdated and not supported by modern browsers. What you are trying to add? It is probably a better way to achieve the same goal, which is supported by browsers.

• How VM Windows 2003 can I make it work with the following equipment

  Hi guys,.

  Suppose that I buy the server below. How VM Windows 2003 I can ru without performance issues. With resource allocation obv.

  PowerEdge R610 Rack chassis for up to 6 x 2.5 "hard drives

  |

  Catalogusnummer:	SV4R610REL 282823
  Module	Tricky	ProductCode (verbergen).	SKU (verbergen).	ID (verbergen).
  Base	PowerEdge R610 Rack chassis for up to 6 x 2.5 "hard drives	205064		1
  Additional processor	No additional processor	205078		2
  Geheugen	32 GB memory for 2 CPUs, DDR3 1066 MHz (8X4Go RDIMMS)	205192		3
  Economic stations	16 X DVD +/-RW SATA Drive ROM	205109		16
  Shipping documents	R610 shipping Documents EMEA1 (English/French/German/Spanish/Russian/Hebrew)	205065		21
  Basic warranty	1 jaar basisgarantie - next business day	206049		29
  Ondersteuningsdiensten	Basic 3 year - next business day warranty	206123		30
  Installation services	You have chosen not to take the Dell PowerEdge installation service	76588		32
  Systeembeheer	DVD of the System Documentation and Dell OpenManage electronic for PowerEdge R610	205116

  49

  Rackmontage voor rails

  Not included the racks

  11433

  88

  Order information

  PowerEdge order - Belgium

  32377

  111

  Processor

  Intel® Xeon® E5540, 2.53 Ghz Cache 8 MB, 5.86 GT/s QPI, Turbo, HT, 1066 MHz Max Memory

  205495

  146

  Power cable

  Power cord, PDU (Rack)

  5605

  207

  2nd hard drive

  (4) 300 GB, SAS, 2. 5 - inch, 10 K rpm additional hard drive (Hot Plug)

  205590

  217

  1 RAID - SCSI-controllerkaart

  6iR SAS internal RAID controller card

  212046

  278

  In of fabriek voorgeïnstalleerd besturingssysteem

  Not included

  8007

  285

  OMLIJSTING vooraan

  R610 Rack bezel

  205115

  669

  RAID-connectiviteit

  CFI: RAID 5 + spare. Min 4 HDD

  274642

  1009

  As

  Power output high, not redundant (1 power supply), 717W, BIOS Performance parameter

  205113

  1015

  1 hard drive

  300 GB, SAS, 2. 5 inch, 10 K RPM Hard Drive (Hot Plug)

  205569

  1209

  TCP/IP Offload Engine Enablement

  Ethernet embedded Broadcom Gigabit LOM with TOE 4 p

  77384

  1310

  Serverbeheerkaarten

  iDRAC6 Express Server Management Card

  205619

  1314

  > Why should I the extra CPU?

  UH... because you ask how much Windows 2003 virtual machine, you can run... I GUESS that means more out... That more CPU more the better overall performance of ESX, VM and ESX operating system are designed to work on ALL hearts, so the more hearts of better performance.

  In your config version right now, I wouldn't go above 20 VM.  as you plan to use only 1 hard drive?

  If you use 1 disc, you realize that you have only 1 disc do all the work... right?