How big boot esxi drive should be?

Similar Questions

• How big a HARD drive can put you in a 3110CT

  I have updated the BIOS to 7.70 and want to know how big a HD that I can use to replace the 6 GB it it came with. Does anyone know what size the suppport of new will BIOS?

  Hello

  Unfortunately, I n t found any documents on the HARD drive sizes supported.
  But in my opinion, you can use a 10 GB HARD drive with no problems.

  Good bye

• How do I boot ESXi from a Flash drive

  Hello, I have a LENOVO G570 and want to boot ESXi from a flash drive.

  Question-if I boot from a flash drive, ESXi install on my hard drive?  I don't want that it installed on my drive hard because I have Windows 7 installed on LENOVO G570.

  Without taking into account the fact that your hardware is not supported to run ESXi in native mode, you might be able to install ESXi on a USB key. However, the VMFS data store (where is stored the VM) must be on the hard drive (no USB device is taken in charge).

  If you want to try ESXi, you can be better egg to run as a virtual machine using VMware Workstation. That's how many of us do this to test and practice.

  André

• How to boot from a USB - Portege R500 flash drive

  Hello

  I have a Portege R500 running Windows XP, presented about 2 years ago and recently contracted a virus that has infected some of the startup files as the minute I connect it disconnects again, even in SafeMode! The quickest way I can think sorting is to reformat with the XP Recovery disk and reinstall windows.

  Problem! The CD/DVD drive on the computer laptop stopped working earlier, tried almost everything in the thread on this site, but had no luck.

  So my plan was to boot from a USB flash drive and do it this way. However in the boot parameters I only have the options of HARD drive / floppy drive / CD-ROM / LAN, none of them work. Does anyone know how to boot from USB flash drives?

  Any help would be really appreciated

  Hello

  As far as I know, it should be possible to boot from USB FDD

  I don't know if you would be able to boot from a USB flash drive, but it of certainly worth a try m

  Generally, you can try to press the F12 key when the laptop is turned on.
  A start menu should appear on the screen, then you should see all bootable devices.

  PS: as far as I know the USB startup was available in ToshibaHWSetup (tool of Toshiba which changes the settings of the BIOS under windows OS.) So I guess boot from USB must be possible.

  Welcome them

• Laptop HP 17 p100: how the usb flash drive big that I have to create a system of 10 Windows Recovery?

  How the big usb flash drive do I need to create a system of 10 Windows Recovery?

  Yes

  Hello;

  Let me welcome you on the HP forums!

  There is really no way accurately guess in advance, with one of the reasons being that the options are available when you do this.  An option creates a recovery drive minimum with what is needed to repair the operating system.  Another option creates an image that is able to completely restore the operating system and its partition.  Thus, the size can vary from 4 GB to the size of the partition to the OS.

  Myself, I found as build-in recovery to be unreliable, especially those of Ms.  So instead, I use a third-party imaging/restoration solution known as Macrium Reflect.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Anyone know how?

  Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Someone knows how, I could not find where it change?

  See http://kb.mozillazine.org/browser.cache.disk.parent_directory

  You can also install portable Firefox version, if you want to run Firefox on a disc of SS.

  • http://PortableApps.com/apps/Internet/firefox_portable

• What type of driver sound has extension wav. Which audio driver should I download Windows 8 and how?

  What type of driver sound has extension wav? Which audio driver should I download Windows 8 and how?

  Sannia Hello,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. do you try to play audio files. WAV extension?
  2. If so, what happens when you play the files? They do not play, or you receive an error message or a code?
  3. What is the brand and model of your tab Windows 8?

  Thank you for details on the issue.

  File (WAV) Audio Waveform format is a Microsoft and IBM audio file format standard for storing an audio bitstream on PCs. It is an application of the Resource Interchange File Format (RIFF) binary stream format method for storing data in "chunks", and thus is also close to the 8SVX and used the format AIFF on Amiga and Macintosh computers, respectively. It is the main format used on Windows for audio usually compressed gross systems and not compressed. The usual bitstream encoding is the format for linear pulse code modulation (LPCM).

  Audio driver is common for all types of audio files. However, in order to play an audio file with a specific extension, you may need a special codec that you can install. You can refer to this article:
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

  Additional information:
  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Error: "one of the drives should be checked for consistency" to start the computer

  The original title: disk space

  My laptop is an Acer Aspire 5000 running with XP Home Edition. At a hard 100G drive with 2 partitions fat. Recursively shows problem at startup. The message displayed is "one of the drives should be checked for consistency. So when he was checked always check disk space and get stored at 41%. I tried to restore several times, but it is once again no place for a long time.

  Could you help me with this?

  Hi RodrigoGodinez,
   
  Sometimes the disk check always starts check the file system on one or more drives for consistency. If no button is pressed, the disk check is aborted. In fact, it is because a data structure of the disc or file is corrupted which can not be recovered and check disk always runs at Windows startup.
   
  Restart the computer and run the command chkdsk from the recovery console.
   
  To boot into the recovery console, see the following article:
  Description of the Windows XP Recovery Console for advanced users
   
  Additional reference on:
  Recovery Console overview
   
  For more information about the disk check, see:
  How to perform disk error checking in Windows XP
   
  Note: While running chkdsk on the drive if bad sectors are found on the hard drive when chkdsk attempts to repair this area so all available data on this risk to be lost.
   
  If the disk check done in start the computer every time, here is an article that could be useful for:
  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

• "Your drive should be checked for consistency.

  Hello

  I was wondering if you could help us?  I am running Vista on a Dell laptop and recently have been receiveing "your drive should be checked for consistency" at the start - it, then crosses the chkdsk to BACK process.  It goes through the process very well, deleting some files and move others. However, once I have connected to Windows, my laptop does work for a few minutes before freezing completely upwards. I thought it was just streaming elements that aggravate freeze it, but it seems to freeze no matter what I do.  I continue to have force a switch to stop/off that I can't even restart.

  Its been my computer completely unusable - is there something I can do to solve this problem, apart from buying a new one?

  Thank you!

  Katie

  Thanks - how could I do?  Is this a hardware problem?

  Sounds like it... You said, "it goes through the process very well, deleting some files and moving others." which tells CHKDSK is to find questions and tries to compensate for them.  However, who can only go so far and if there are internal physical damage on the disc itself (disk drive I guess - not an SSD) then the damage could extend.  Sooner or later, you might get to a point where you don't even have the option to boot.

  What your backups?

  You can find the manufacturer of the hard drive itself and get their diagnostic utilities and test the drive entirely with those.  That will tell you if you have real bad sectors and like it or whether a zero and writing with their utility and the new installation of the operating system could help.  It is more likely that it is a pity however.

• Satellite M40-185 - how to boot from USB?

  I have a Toshiba Satellite M40-185

  I could not a off of usb because the two Mafany usb boot option

  Options for the device
  1. HARD DRIVE
  2 CD-DVD
  3 FDD
  4 LAN

  How to boot from usb?

  Hi esc.

  I think that you have answered the question yourself because you've posted all the startup options that are available and there is no option to boot USB on this laptop.

  All you can do is to install the latest BIOS, but as far as I know Satellite M40 can t boot from USB!

• How to exchange the drive (PSA15E-01PFQEN)?

  I have the laptop above and I would like to change the hard disk where is?

  This old model of laptop doesn't know me, but change the HARD drive should not be so complicated.
  At has first to check the underside of your laptop. Maybe you will find the HARD drive cover. Remove it and if the HARD drive is placed there, you will see how it is fixed.

  If the HARD drive is not placed in the lower corner that laptop must be dismantled for complete access to the HARD drive.

  Please let me know if you have found the HARD drive in the lower corner.

• How to reinstall the driver hotkey Qosmio F20-149?

  I had the problem of "THotkey. -0 x 00031402, 0 x 00000002 code. So, I did the respective driver download but now, if I want to launch the program Tfnf5
  nothing starts.
  Can someone give me it please tip how to get the driver reinstalled?

  Fraetzi

  First of all, you should try to refresh o (restore) the common modules!
  Then remove the Hotkey utilities for display add it & remove features in the control panel software. Reboot the laptop and install this app again.

• Qosmio G35-AV600: I don't know how to boot from a CD - R

  I'm having the problem of 'Bad Machine' and I downloaded the utility DMI.
  I don't know how to boot from a CD - R. I don't have a floppy drive. Help me Toshiba.

  In fact, I burned the .iso to a CD image file and kept pressed 'c', while starting my computer was. I did not work.

• How to boot from USB FD in HP Pavilion Sleekbook 14-b035tx

  How to boot from a flash drive? I pressed F10 and go into the BIOS menu > System Configuration > start, in the start options Options, I have not found my flash drive...

  Hello:

  See if you change the setting to enable the legacy mode/disable secure boot bios to start on a different device.

  See this link...

  http://support.HP.com/us-en/document/c03736054

• Pavillion L1M11PA How to Boot from DVD

  How do boot you from the DVD internal in this model. I need to boot from a DVD from Unix to run a program and it gives an error not a UEFI drive.

  The Bios is F36 and me tried to solve Secure Boot to disable and have enabled the legacy options, but bios does not take into account these settings and is the default values in the output. The result is that I can not bot from the DVD.

  How can I fix it

  I discovered it. Just disable Secire Boot and leave the legacy only choice. Restart the computer and use F9 to start from the DVD