How can I control my PC at home with my laptop when I'm at school
I have a PC that is running Windows 7 Pro, and a Surface Pro, and I'm trying to control and use the data from my PC with my laptop when I am at school. How can I do this?
What mean by configured entirely? I want to use remote desktop, because I don't want to use 3rd party programs. I'm not sure Microsoft lol... ^_^
I pointed out the main things: Remote Desktop enabled in Windows 7 password on your account (s) you want to use port forwarding on your router to distance, these same accounts or members of the Administrators group or the remote desktop users group, (which means that you will also need to know your external IP address - or use a DNS service dynamic through the configuration of your router) and Windows Firewall (or other software firewall) configured to allow port through remote desktop.
There are instructions from Microsoft:
http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network
And they are good - but some of the above steps depend on factors other than the knowledge of Windows 7. ;-)
Which is the reason why I still suggest TeamViewer. If you can download and install + don't forget a logon username and password - you can probably use TeamViewer for remote + more features Office. ;-)
Tags: Windows
Similar Questions
-
How can I get information off my office on my laptop when firewire connections are different?
I have an old desk (2007) that won't start, it turns on but then stops. I went to Apple and they advised me to connect my computer laptop (2013)
on my desktop with the firewire connection. My problem is the firewire ends are not the same on both computers.
Laptop has HDMI and the Office has a connector with many small holes? (not tech saavy)
I want to know how to connect the too to retrieve my information?
You use a FireWire 400 to 800 adapter and/or a FireWire 800 adapter Thunderbolt.
(141798)
-
How can I make the FN keys work with your laptop more old?
Hello
I have laptop Satellite 5200-902. Unfortunately there is no support for such portable one 'old' as this on Windows Vista. Vista runs very well on it but the only thing I didn t do is to operate buttons FN in Vista.
Can someone please give me an advice?
Thank you
Hello Danny
Unfortunately, I don't think that you'll have success with these buttons. The fact is that Toshiba use self designed utility for all FN keys features. As you know, old models of laptops are not supported in vista, and you will not be able to find and install any utility for it.
Sorry but there is nothing to do.
-
- Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello bakerdave,
Click the following article number:
KB Article ID: 823570 -how to get a new product key for a suite Microsoft OfficeIt should help with your problem.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How can I control the list of the available in the message SSL Client Hello cipher suites?
I want to limit my browser to negotiate the cipher suites fort. I would like to prohibit, MD5 and RC4.Set the SSL3 preferences related to false on the subject: config page (filter: security.ssl3.).
-
Hi all
My job is: Loop While structure generates the signal for 4 seconds when you press the 'start build' button, after that data has been backed up. You press the button "generate the beginning' once again, and the loop runs one again.
My problem is: the first pressing, the loop, exactly 4 s (3, 999 s), but him second, third pressing on... The time elapsed is not 4 seconds, always smaller (even ~ s 0.003). The loop works correctly after press the "Exit" button and launch the program again.
How can I control exactly time loop work While Structure without the press "Exit".
Thank you any help!
P/S: I used the number of cycles (ms) just to look at a working time of the While loop.
NMCuong
This shows a quick solution
-
How can I connect to windows vista Home premium withou admin password
How can I connect to windows vista Home premium withou admin password
Hello
If it is not applicaple, you need to reinstall the operating system.
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
-
How can I control the Tasbar? It is always in sight and blocks the screens of other programs. Using Windows 7 and Microsoft Security Essentials. "Lock the taskbar" is checked and "Auto-hide the taskbar" is checked. Help, please.
Taskbar will appear to take with you when you either come from anywhere near the bottom of your screen or a security alert is displayed.
The best I've found is to use the fullscreen with F11.
-
I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?
-
How can I control what FEED my CC from Adobe to?
How can I control what FEED my CC from Adobe to?
I did it!
The cloud control creative program location
CC App - file locations
> Open creative cloud App (Image below)
> Right click on it (gear, drop-down) (Image below)
> Select and click on 'Preferences' (Image below)
Applications TAB >-install Locatotion (F:\Programs)
The files tab >-location of the folder (F:\)
There you GO! (Image below)
Useful links of video
https://helpx.Adobe.com/creative-cloud/help/install-apps.html#download and install applications
Download, installation, setting up
How to properly set up the SSD as boot drive and the HARD disk as disk storage - YouTube
-
How can I control how the images sit in the copy?
How can I control how the images sit in the copy? I don't like how the copy runs around my images. The spacing is uneven.
http://www.longstafflongstaff.com/about.html
If you float a container, you should give a specific width (see red code below). I don't know why the top image works without a width applied - may he just happens to work because of the place, it falls into the code.
http://www.longstafflongstaff.com/images/aunties.jpg"alt ="aunts"width ="343"height ="241">
-
How can I control the image preview of Facebook?
Help!
How can I control the preview image that is displayed when the link is shared on Facebook?
Tried to add the snippet under the <>head, in the html view of the page in Business Catalyst... with no luck.
Use the Opengraph tags, please refer to the following thread - http://forums.adobe.com/message/5137786#5137786.
Thank you
Vinayak
-
At the opening of a bridge of fthrough Photoshop file, how can I check which version of Photoshop, the file will open in?
I store my PSD files that is adjacent to the original RAW file which it originates.
If I open the folder and double-click this PSD file, it opens to the CS6. But, if I use the bridge (CS6) for access to and open the same file, it starts by is Photoshop CS5 and then opens this file PSD in CS5.
How can I control which Photoshop will open a file then choose to open it through Bridge?
Interesting, but it does not give any idea what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location of Curt and Photoshop Document research. Beside him ideally should show Adobe Photoshop CS6 if you have Bridge open CS6. Click to provide the fly on the menu and choose the correct Photoshop from the list.
But probably something went wrong with your installation. By default, Bridge chooses the latest version of PS to open its plug in.
Maybe reset preferences may also help you. Can you provide more details about the version of the OS etc.
And you have a good reason to keep your Raw and finalized in the same place files. Personally I put them aside and use a convention of appropriate filename (YYYYMMDD and details) so I can easily search the DNG files in my archives if I needed, but I don't make mistake by opening a bad
-
How can I control a button from a swf file to another swf file?
Hello
I have a file main.swf . From this file I can access the file external.swf which is an external file.
Now, how can I write code on my file main.swf to the button that is on my external.swf file?
Activities.MainPanel.close_btn.addEventListener (MouseEvent.CLICK, btnClickClose);
Activities.MainPanel.close_btn (This button is actually the external.swf file, but I want to write code on main.swf file to run it on external.swf) How can I control a single swf in another swf file button?
Thank you.
Some examples of code that you should be able to adapt to your needs.
create a new instance of the loader object.
var loader: Loader = new Loader();
make the download request...
var request: URLRequest = new URLRequest ("external.swf");
Add a full event for the loader listener
loader.contentLoaderInfo.addEventListener (Event.COMPLETE, completeHandler);
start the actual loading process...
Loader.Load (request);
Create a new empty movieClip instance, you place the movie loaded into this movieClip after loading
var externalMovie:MovieClip;
This function is called when the download is complete and the file is ready for use.
function completeHandler(event:Event):void {}
set the contents of the film to the new empty movieClip...
externalMovie = MovieClip (event.target.content);
Add this new film to the display list.
addChild (externalMovie);
}
Now you can reference the film loaded with the name of the instance 'externalMovie '. So if, for example, you want to address a button in the film loaded, you can write something like that on the main timeline:
externalMovie.addEventListener (MouseEvent.CLICK, btnClickClose);
function btnClickClose(event:MouseEvent):void {}
}
-
How can I control the concurrent programs?
Hello
When simultaneous GL & OPM ruinning programs, off-server peformance classes. How can I control it? I want to restrict the user not to submit or don't work not during office hours. How is it possible?
Concerning
ArizAriz,
Please mention the version of the application, the database version and the operating system.
The performance was accepted before? If so, what changes have been made recently?
Is the problem with concurrent programs standard or custom? In addition, please mention the names of simultaneous (if possible) program.
Do you run simultaneous program "Gathering statistics for schema" regularly?
To find out why these simultaneous program affects performance, enable trace as shown (Note: 296559,1 - FAQ: Techniques of common tracing in the Oracle Applications 11i/R12) and generate the file TKPROF.
You could schedule the program to run at certain times - see "Oracle Applications Documentation Set Guide system administrator" for more details.
Oracle Applications documentation
http://www.Oracle.com/technology/documentation/applications.htmlKind regards
Hussein
Maybe you are looking for
-
Satellite M40X driver PCI Device and NetworkController problem.
Hello.. I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and
-
Re: Portege R500 unable to connect with Mobilink
I am unable to make a connection using the software of Novatel Mobilink on my new R500. I installed * XP * and installed the relevant downloads on the Toshiba site, i.e.Power RF 3 G v 1.0.1.8 control utilityMobiLink 2.0.2.1.8 vWireless Broadband Mobi
-
Is it possible to update the BIOS without Windows installed - Satellie L30
I have not installed WIndows on my Toshiba Satellite PSL33E. Is it possible to create a boot CD to upgrade the BIOS on my laptop?
-
Configuration updates. Step 3 of 3 0% complete__
My computer keeps restarting. Whenever I get "Configuring updates. Step 3 of 3 0% complete. Do not put the computer", then reboot again.
-
5520 art photos: 5520 black ink questions
I would like to know if it there did nothing for known issues with the 5520. I just got back from Best Buy with a new printer HP 5660 model but I will not even open it if it is a known issue for HP. I also have the fi 5520 and I tried all the "stuff"