How can I control the temperature of the internal components in my office?
I have a HP Pavillion Elite Windows 7 Ultimate 64-bit m9600t. I want to follow the temperature inside the Cabinet. What can I use? I understand there is a free software that will do it?
Hello
Download speedfan, GPU - Z and coretemp. These are all the freebies. Pick and choose what works best for you.
Tags: HP Desktops
Similar Questions
-
How can I control the list of the available in the message SSL Client Hello cipher suites?
I want to limit my browser to negotiate the cipher suites fort. I would like to prohibit, MD5 and RC4.Set the SSL3 preferences related to false on the subject: config page (filter: security.ssl3.).
-
How can I control the Tasbar? It is always in sight and blocks the screens of other programs. Using Windows 7 and Microsoft Security Essentials. "Lock the taskbar" is checked and "Auto-hide the taskbar" is checked. Help, please.
Taskbar will appear to take with you when you either come from anywhere near the bottom of your screen or a security alert is displayed.
The best I've found is to use the fullscreen with F11.
-
I want to get multiple clips horizontally through the frame, how can I control the speed at which the move?
-
How can I control the image preview of Facebook?
Help!
How can I control the preview image that is displayed when the link is shared on Facebook?
Tried to add the snippet under the <>head, in the html view of the page in Business Catalyst... with no luck.
Use the Opengraph tags, please refer to the following thread - http://forums.adobe.com/message/5137786#5137786.
Thank you
Vinayak
-
How can I cut the internal of my Satellite L670-1JP louspeakers?
How can I disable the internal of my Satellite L670-1JP louspeakers, without inhibition of output?
Hello
Try * Fn + ESC. *
Welcome them
-
How can I block the users access to microsoft office?
How can I block the users access to microsoft office?
You must set "" permission to run on each of the Microsoft Office programs (word.exe, excel.exe, powerpnt.exe, etc.) such that the group 'Administrators' and the SYSTEM is allowed to run. To do this, you do a right click on the .exe file, select 'Properties', then click on the 'Security' tab and change security as you wish.
If you do not have a 'Security' tab, then it is because you have XP Home Edition, or if you have XP Pro with active Simple file sharing. For XP Home, you must boot mode safe (repeatedly tap F8 at startup key) and login as an administrator to access this tab. For XP Pro, follow the instructions in the following article:
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874 >HTH,
JW -
I'm not having implemented the cd with me. How can I update the window components. by mistake I uninstalled the
Reinstall windows components, you've accidentally deleted when you have the game CD with you.
-
How can I change the internal links to https in muse?
I want to add a zertificate of ssl on my site. How can I change the internal links to the muse in https?
Look here:
-
Hi all
My job is: Loop While structure generates the signal for 4 seconds when you press the 'start build' button, after that data has been backed up. You press the button "generate the beginning' once again, and the loop runs one again.
My problem is: the first pressing, the loop, exactly 4 s (3, 999 s), but him second, third pressing on... The time elapsed is not 4 seconds, always smaller (even ~ s 0.003). The loop works correctly after press the "Exit" button and launch the program again.
How can I control exactly time loop work While Structure without the press "Exit".
Thank you any help!
P/S: I used the number of cycles (ms) just to look at a working time of the While loop.
NMCuong
This shows a quick solution
-
How can I control the concurrent programs?
Hello
When simultaneous GL & OPM ruinning programs, off-server peformance classes. How can I control it? I want to restrict the user not to submit or don't work not during office hours. How is it possible?
Concerning
ArizAriz,
Please mention the version of the application, the database version and the operating system.
The performance was accepted before? If so, what changes have been made recently?
Is the problem with concurrent programs standard or custom? In addition, please mention the names of simultaneous (if possible) program.
Do you run simultaneous program "Gathering statistics for schema" regularly?
To find out why these simultaneous program affects performance, enable trace as shown (Note: 296559,1 - FAQ: Techniques of common tracing in the Oracle Applications 11i/R12) and generate the file TKPROF.
You could schedule the program to run at certain times - see "Oracle Applications Documentation Set Guide system administrator" for more details.
Oracle Applications documentation
http://www.Oracle.com/technology/documentation/applications.htmlKind regards
Hussein -
How can I control the number of clients connecting to one or more access points?
Hi guys,.
I am using several access points LWAPP/CAPWAP (1010, 1131, 1142) connected to the 4400 series wlan controllers (OS Version 4.2 and 7.0).
Regarding the client connection to access points, I have several questions:
1. extent to which clients can connect to an access point (maximum possible vs recommended)?
2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.
3 How can I balance the number of customers between two adjacent ap, who use the same SSID?
Best regards
Thorsten
Hello
1. extent to which clients can connect to an access point (maximum possible vs recommended)?
YEARS-
Here is the link for possible Maximum...
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
c70ccfg.html#wp1085099Recommended , Not more than 20 clients per AP.
2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.
YEARS - here's the software bug that we had raised with the development team of thre...
Symptom:
There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
Conditions:
Workaround:
3 How can I balance the number of customers between two adjacent ap, who use the same SSID?
YEARS - you can configure the feature aggressive load balancing across the WLC, it can help...
Let me know if that answers your question...
Concerning
Surendra
====
Please do not forget to note positions that answered your question and mark as answer or was useful -
Satellite P100 - 400 PSPA6A: How can I control the fan speed manually
Good evening
I would like to know how can I manually control the speed of the fan?
I ask this question because my laptop rarely use the fan at a higher speed.Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)Kind regards.
Hello
I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.
If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.
If you are using Vista, then you should check the Vista Power Options:
Check this thread how to manage Windows Vista power management features
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.
-
How can I control the writing-data-to - spreadsheet.vi to save the data?
Hi all
I tried to draw a wave and save the data to excel. Now, I want to control the writing-data-to - spreadsheet.vi to save data when I want which means that the vi records nothing until I have send a command to it. How can I make this happen or do I need any other screws?
Nicky
Hello
Maybe this wat you are trying to do... Let me know if it helps...
Kind regards
amine31
(Kudos are always welcome)
-
How can I control the NOR-5663 downconvert
Hi, how are you doing.
I have a NOR-5663, I want to make it as a spectrum analyzer.
I need to deal with the problem of RF image. I work with Labview 2009.
so I need independently control the downconvert of NOR-5663. Can I use OR - Tuner for Drevier?
DAMA is maybe good enough for my work, like soft façade nor-DAMA, but I don't know how is it?
Thanks for your help
Charles
Hello!
You can not use NI Tuner tuner 5601 (no traditional DAQ support) but use the driver of the ACCA and use it with external digitizer option.
hope this can help you
see this example: http://decibel.ni.com/content/docs/DOC-1980
concerning
-
How can I control the speed of the piezo BPC203 with Nanomax-TS 311D/M
I use the BPC203 to control the movement of the nanomax 311D/M. Stadium I was able to change the position of the scene depending on the size of level by writing code in labview using the ActiveX control. I need the code to control the speed of the movement of the scene, for example, if the size of my step is 1 micron, I want to point to less possible speed Steplessly no (say 10 seconds to move this step size). I realized that the scanning speed could control the entrance to Piezo voltage it by speed and called "setslewrate" method to call node of the piezo and adjust the speed of scanning of loop closed as 0.75 (I assumed here units are: V/s not volt/milliseconds) and waited for the loop to go slowly with my scanning speed that I have not connected the hardware to the labview but the loop runs with processor speed not with the scanning speed. does it in fact possible to simulate the scan rates in Labview without hardware integration? Is there an another mentod for controlling the speed of Piezo? The answers are very welcomed. Please find a block diagram image FYI rasthaus...
Hi Sara,.
I have a few suggestions. The first is that you have a parallel loop that does the same thing as your initial loop, but change the channel so that it works with the direction of Z.
Alternatively, you could create a new VI dealing with your direction of Z. Then, you can create void VI on your 2 vi. Then call your sub VI a VI main run one after the other. Here is a labview help link that shows you how to create sub screw: http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/creating_subvis/
Maybe you are looking for
-
I was not able to get the Motion Leap starts when I turn on my laptop.
-
How to reallocate unused space on my hard drive?
How to reallocate unused space on my hard drive? Just delete it had ' partition to enlarge my 'C' drive Have a Sony VAIO - I know its old, but he has a lot of punch left.
-
Print button not available outlook express
Outlook express keeps freezing and suddenly, the "print" button is grayed out and I can't print emails. Any ideas?
-
Original title: trying to uninstalled McAfee Security Center provided by AOL. When you attempt to uninstall the program I get the message "you don't have sufficient access to remove this program. See your system administrator. I'm listed as the admin
-
I bought a DC Acrobat pro, because I need to change the format of PDF to WORD. So I bought and select: PDF export and turns me to settle on which is written: "buy acrobat pro DC" but I already bought!