Similar Questions

• I use FF (ESR) v24 to work. How can I sync with my new Android device?

  The only Firefox it seems able to get for my new Android device is v30, and the synchronization system has radically changed between v30 and v24 Extended Support Release that I use at work. How can I sync my new android and my work machine?

  Open Android OS settings under the section add accounts use the option of Firefox Sync (not recommended).

• had dsl fixed today, but my outlook express password does not work, how can I reset with a new password

  had dsl fixed today, but my outlook express password does not work. How can I reset or start over with a new password

  You must use the same password that you would use if you have access to your messages via the Webmail of your server site. You will need to reset it with them.

• I bought the creative cloud. However, when it is installed, the software by default back to my old account adobe id. How can I start with the new account in which the purchase was made?

  I bought the cloud creative on a new student account as I am currently a full-time student. However, when I download the creative cloud app and try to connect, it brings back me to my old adobe id. How can I get rid of this account id on my pc so I can start using my new account? Advice would be really appreciated that I need to use the software as soon as POSSIBLE! Rob

  Close the session and close your creative office of cloud.

  Restart it.

  Then sign in with your new Adobe ID and password.

  Nancy O.

• I use a MacBook Pro 11 elements. I can no longer import photos from iPhoto as this was changed to 'photos' how can I use with my recent photos?

  How can I import the photos in "photos"? My macbook program has no iPhotos only "photos."

  Hi Anne,.

  Currently, it is not possible to directly import Photos. You need to export media from the Photos app on hard drive and then import them into the Organizer.

  Thank you

  Catherine

• WLAN how can I use with Cisco WLC 2504

  I have two companies co-implantant and to decrease costs would like to implement a single Cisco WLC and separate traffic with the VLAN. I see that the controllers of the series Cisco WLC 2500 min supported number of WLAN: 5 and max: 75. That means actually? When I create more than 3 WLAN on a controller, the best practices page advises me against the use of more than 3 WLAN. Is it good to have more than 3 Wireless LANs, and what are the penalties to do?

  5 and 75 are the number of points WLC can support access light weight.

  By default, 2504 can manage up to 5 access points. You can increase this number up to 75 by adding the new license.

  Also, it can support up to 16 different WLANs (SSID)

  FC

• How can I associate with a certain scene in another project?

  Hello

  I would like to make an addition, emit a tip action to a button that links to a scene in another project.

  as an example:

  On the last stage of the project B, I want to put a link back to project a scene 3. This is where the initial selection to open the project B was performed.

  I would be very grateful for your help!

  Thanks in advance,

  Stephanie

  You're used to plot? This is because you use the word 'scene '.

  Take a look at Jim Leichliter article: http://captivatedev.com/2013/11/21/jump-specific-slide-course-using-captivate-7/

  lILYBIRI

• I have 2 credits of the film. How can I use them?

  I have 2 credits of the film. How can I use them?

  If you show a credit of movie rental, when you are signed into your iTunes account Store, just rent a movie. The credit must be used automatically.

  In my view, the rental must be for $4.99 or less when using a rental credit. If it is more you will be charged.

  Hope that helps!

• How can I use the sequence of the string "\u00e5" in myfile.txt converted unic

  How can I use the sequence of the string "\u00e5" in myfile.txt converted to unicode in my application?
  
  I have a text file, MyFile.txt, with some sequences represented unicode:
  \u00e5
  \u00e4
  \u00f6
  etc.
  
  This is the file contains unicode, not the character it represents: a, a and o.
  I get the sequence of the file and save it to a vector. When I tried to use it on a JButton, I see the "\u00e5" string and not the character that I assumed.
  
  

   
          read file codes ...
          ...
       Vector<String> glyphVector = readGlyphIndex.getUnicodeFiles();     // to retrieve the vector with unicode sequence and save it to glyphVector
       String unicode = glyphVector.get(0);     //get the first unicode sequence
          System.out.println(unicode);    //displays \u00e5 and not å in the console.
       jButton.setText(unicode);   //jButton is a JButton and it shows the string \00e5 and not the character å
          ...

  The question is how to convert the sequence of string to be a unicode escape in the code?
  
  In order to make it clear:

  //from
  jButton.setText("\\u00e5");
  //to
  jButton.setText("\u00e5");

  Thanks in advance!
  
  Dragonfly

  String s = Character.toString((char) unicodeInInt);
  

  Strictly speaking, if unicodeInInt is a Unicode code point (for example, it can be greater than 0xFFFF) then the correct code would be this:

  String s = new String(Character.toChars(unicodeInInt));
  

  However, since the "\u" notation allows only 4 hexadecimal digits (and need to 0xFFFF code points > Unicode represented by their UTF-16 encoding), the code above is not enough for this particular case.

• How can I do with the files of the EEA?

  Hello

  I find the images I have change in my iPad and then I put it in WINDOWS while they turn to become AAE.

  After that I copied it to my iMac format while remaining EEA (I thought that they will transform the images so that I can still see) but they are not.

  Now, I have a lot of files of the EEA in my HARD drive, how can I do with them?

  Your iPad stores the events in the film as a pair a. File of the EEA and the original image file.

  When I import pictures from my iPad on my Mac with Capture of Image and save it to a folder I see one. File of the EEA as a file for each image that has a filter applied.  When I import the image with the. The EEA Photos for mac file, it will use this file applies the filter to the photo. For example:

  

  After you import IMG_1583 to Photos, I can see in pictures the 'Process' filter to apply. If you open one. File of the EEA with a text editor, you can see that it contains the XML describing the effects.

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• How can I use variable presentation logic SQL

  Hi Experts,

  How can I use variable SQL logical presentation. I need the exact syntax. Kindly help me to achieve this goal.

  "Time". "" Date "between the Date of 2014 '-1-17 'and Date' ' 2014-2-16

  Thanks in advance

  Asim

  It's done... We can use it in the logical query with the same syntax where we use in converting this filter as SQL...

• How can I use VB Encoding.UTF8.GetBytes () and System.Text.Encoding.Default.GetBytes () in actionscript can someone help me?

  How can I use it in the action script. My VB code is more

  Encoding.UTF8.GetBytes ("String") and System.Text.Encoding.Default.GetBytes ("char table")

  Thank you. !

  Udit Bhardwaj

  I love the way to convert as a result

  Encoding.UTF8.GetBytes ("String") is in ActionScript:

  YourByteArray.writeMultiByte ("String", "iso-8859-1");

  And

  System.Text.Encoding.Default.GetBytes ("char table")

  YourByteArray.writeMultiByte ("String", "String");

  Thank you for your suggestions to moccamaximum

  Thank you!

  Udit Bhardwaj

• How can I use my photo albums as screensaver with Apple TV 4th gen

  How can I use a photo album that I created as a screensaver on the generation of Apple TV 4 because it is not an option in this sense?

  What follows is the Apple TV 4 user guide...

  Screensavers

  Apple TV displays a screen saver when it remains inactive for a predefined number of minutes.

  Air screensaver shows beautiful videos of slow motion of the places of the world, upload to an online server, making the screen saver more engaging and dynamic. For the antenna, you can control how many times Apple TV check and download new videos.

  Change the frequency of aerial screensaver download. In settings, go to general > screen saver and select Download New Videos, and then select an option.

  Return by using Apple TV. When the screen saver is active, press the contact surface to get to some app have been previously using.

  Choose a different screen saver. In settings, go to general > screen saver and select the Type. Then select the screen saver you want to use.

  Select the photos to display. Many of the screen saver options display a slide show of photos - it can include photos provided by Apple, or your own collection stored in iCloud. To choose which photos are used, in the settings, go to general > screen saver and select the Type. Then choose one of the types of screensaver-photographers.

  If you choose my Photos, the Photos app opens. Follow the instructions to put photos as screensaver.

  Set the screensaver time-out. In settings, go to general > screen saver and select the setting starts after, and then specify a number of minutes. This indicates to the Apple TV to start the screen saver automatically if the unit has been idle for the specified time.

  Activate the screen saver immediately. Press the Home button to go to the home screen (if it isn't already), and then press the button twice.

• How can I use Windows on the Mac desktop?

  How can I use Windows on MAC desktop products?  OS X El Capitan

  You can install it in BootCamp or virtual VMWare, Parallels or VirtualBox machine