How can I correct a problem of "Serial Cable using IrDA Protocol"?
I have added a second hard drive of my computer. According to Windows Vista it works, however; After I did I received a ' infrared devices message both in my control panel, that has never been there before and in the devices Manager pane.» Also, in the Device Manager, I got a "serial cable using IrDA #2. Protocol. I don't know what is "IrDA". the best I can get out of windows, is that it is a code 43. When I use the check for button solutions I am told that the drivers for the infrared problem is that the driver software is not installed. If I click on the button get the updated drivers, which is to say that the latest drivers are already installed. I do not know what device does not work, and I don't know what is infrared device, and what is a "IrDA Protocol". I can't find a definition of these terms or anything like that ales thereon in respect of aid. So I was not able to find anything about them in the windows of the library of the line. I don't know where to get more information about this problem. Please help me. Thank you.
Install the hotfix from the link below, should resolve your problem
http://support.Microsoft.com/kb/941997
Tags: Windows
Similar Questions
-
How to fix it. Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP
How to fix it. Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP I have no idea what the point is that the origin of the problem. Is there a link I can go to-to solve this problem? Thank you in advance.
Yes, just right click on the device in Device Manager and select uninstall. When you restart, Windows can detect the device and try to reinstall. If the error is returned, post back - if this error is related to a laptop that has an infra-red (IR) integrated connector, you can disable this device in the BIOS.
-
The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.
Appreciate any suggestions on how to solve this problem.
Steve Stephens, * address email is removed from the privacy *.
Hi, Steve Stephens.
Did you run the fixit available in the link below?
Hardware devices do not work or are not detected in WindowsMethod 1: Check for any error message in Device Manager
When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:
(a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
(b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) in the Device Manager, find your device, and then double-click the device name.
(d) If an error code has been generated, the code appears in the status area of the device under the general tab
Method 2: download and install all available Windows UpdateInstall Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updatesMethod 3: Download and install SP2
Learn how to install Windows Vista Service Pack 2 (SP2)
http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2 -
Windows has prevented my device Infarred "Serial Cable using IrDa Protocol" to 43 of the Labour Code
Windows has prevented my device Infarred "Serial Cable using IrDa Protocol" to 43 of the Labour Code
Can someone help me with this please. Can I change the value and it Peel attention but in a few moments it will return on attention. I have no idea how yo what is causung this also...
Hello
· You have installed the latest Service Pack for Vista?
Uninstall and reinstall the device.
a. Click Start.
b. in the type of search box of start of "devmgmt.msc" and press ENTER.
(c) in Device Manager, look for the device that has an error and expand the device with the error.
d. right-click on the device with the error and uninstall.
e. restart the computer and check if it installs the drivers and it works great.
-
How can I correct the problem on the computer fan noise laptop vaio sony SA
How can I correct the problem on the computer fan noise laptop vaio sony SA
Hi Davidra,
Download and install if no update is available about the issue using exactly the model of your computer, here: http://esupport.sony.com/US/p/select-system.pl?DIRECTOR=DRIVER
Try the steps here:
https://us.en.KB.Sony.com/app/answers/detail/A_ID/34181
If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/p/service.pl
Note: If my post answered your question, please mark it as an "accepted Solution".
-
Asian languages appear as boxes; How can I fix this problem or if you use an online translator
Asian languages appear as boxes; How can I fix this problem? or if you use an online translator
You will need to download a language pack to correctly display the text.
-
When I try to add music to my slide show of Adobe Photoshop Elements 9, for some of my latest songs, I get the message "the selected file cannot be read because your system does not need to Compress / decompress (codec) installed. How can I fix the song? It is not a zip file, it's an mp3 player. For the songs, I had some time, I have no problem adding them to my slide show. I have a 10 Windows PC and I use Adobe Photoshop Elements 9 and Prime Elements 9.
This is often because of the DRM (digital rights management) or other copyright issues. You can try to convert the MP3 file to a different format such as wav or wma. Otherwise, choose a track without integrated protection device.
Error when you import an audio file protected against copying in Adobe products
-
Cannot open JPEG files. Computer to the word when attempted and gives the unreadable code strings. Corrective action?
The file association seems to be incorrect. To rememdy this...
Right-click on any jpeg and select 'Open with' in the menu.
From there, you should have several options, select Windows Picture Veiwer or anything that makes sense on your pc.
If it opens correctly, close it, and then right-click again.
Rather than choose the same program, at the bottom you should see "Choose program" click on it and select the application that worked, then check the box that says "always use the program selected to reopen this file type."
OK out of there and you should be good to go.
-
I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you
Hi Sheldon,
Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.You might try to tell scientists on TechNet on your question to see if they have a better answer for you: -
How can I correct I tunes problem = error code 42404?
How can I correct I tunes problem = error code 42404?
How can I correct I tunes problem = error code 42404?
Post in the forums of Apple iTunes?
Otherwise - use something like Revo Uninstaller (trial version) to make a more aggressive removal of ALL Apple software. Reset. Install the latest version of the web page.
-
Installation of Lightroom problem: do not recognize the serial number of Adobe lightroom? How can I solve this problem?
What version... where did you buy... What is your operating system
Read the error: "serial number is not valid for this product". Adobe Creative Suite
-
Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right. How can I solve this problem?
CS6 and below: How to access the features of Arabic and Hebrew in Photoshop CS6 - YouTube
Creative cloud. CC to CC 2015:
First install the value in the parameter of English/Arabic language: change the language setting of your Cloud Creative applications
Then enable Middle Eastern features in Photoshop: How to write in Arabic in Photoshop CC (and other adobe programs)
I would like to know if it works.
Gene
-
How can I download software I added serial number to my account. Lost the disk.
How can I download software I added serial number to my account. I don't have the disk.
When I go to my apps, it lists just them with their serial numbers, but no download link.
I have gleened from the download instructions imply that I can only download apps that I bought online.
What is the point of assosiating the series with my account if I can't do anything wth it? A glorified Notepad?
do not hit notebooks glorified. at least you have your serial number.
If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
and activate it with your serial number.
If you have a problem dl'g, you don't follow all 7 steps. the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
-
I am unable to redeem or to connect to my apple account. I constantly get a message saying "cannot connect to iTunes Store. My internet is not the problem because I'm connected to other things on my phone. How can I solve this problem?
According to Apple, http://www.apple.com/support/systemstatus/ it seems to be a problem and they are studying. Check this site to see when it gets corrected.
-
When you type, the cursor jumps around. How can I correct this situation?
When you type, the cursor jumps around. How can I correct this situation?
It is a very common problem when users become familiar with a new laptop. Either your palm/wrist/cuff/bracelet is touching the touchpad as you type or the touch pad sensitivity is set too high and reacts to strong strikes.- Someone to watch you while you type to see if you accidentally touch touchpad of the notebook.
- Go to the control panel mouse configuration and reduce the sensitivity of the touchpad.
- Make sure you use the latest version of the driver from the manufacturer of the laptop for the touchpad and update if a new becomes available.
- Disable the touchpad entirely in favor of a wireless laptop mouse.
As noted previously, this is a very common problem and users are usually completely unaware they do even when it is pointed out to them.
Maybe you are looking for
-
Sign emoticons in chat window, what is yours?
I noticed that the button "emoticon" in the chat window may be different, I saw him with 'mouth smile' and 'upside down' mouth. I noticed that in different Skype clients on different machines and also the images published elsewhere like in the magazi
-
Trackpad in a 240 X 250 X?
Is Lenovo, possible to put the X 250 Trackpad in X 240, by replacing the Clickpad with one that has real buttons? The Clickpad absolutely sucks and I can't believe that I now possess the one generation of ThinkPads with this abomination. I would like
-
Hi, I know there is a lot of info on valves and solenoid valves on the forums, but I'm looking to establish myself a starting point. I need a solenoid (or any faucet that can be controlled, really) that will allow me to open and close the tap fairly
-
Sony NEX - 3 does someone knows how to change the language of the menu?
Hello. bought an invisible viewfinder of the NEX-3... it turns out that the case was too good to be true, because it is a Japanese model (takes great photos!) Downloaded the NEX - 3V5_Update1112a.exe, but do not want the camera in brick. Am I able to
-
A DIALOG BOX IS DISPLAYS IF I DOUBLE CLICK ON ANY OF THE FOLDER
all the files on the office opened in the same program as in windows media Center in mozilla or google chrome. I want to jump, so I uninstall mozilla. now what has happened, all the files are been white, icon is not visible and if I double click on