How can I create it?

Similar Questions

• How can I create a group through Outlook without the application Outlook email?

  How can I create a group by using Outlook without an application Outlook email?

  Sigmalambda wrote:

  How can I create a group by using Outlook without an application Outlook email?

  It is difficult to understand what you're trying to do. You can create a group and send an email to the group in any mail client. The recipients can use any e-mail provider or an e-mail client to receive e-mail. Please explain in more detail what you are trying to accomplish.

• How can I create a new folder in Thunderbird

  How can I create a new folder in Thunderbird

  Right-click on the parent folder, a new folder option appears in the menu

• How can I create a group in my address book?

  I am looking at the help page, and he has "contacts" in the list, but no link to something useful.

  How can I create a group? I want to send something to a group of people, but I don't want them to see all the other people who are part of the group.

  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

• How can I create a trigger e-mail messages sets a phone when Gets an email from particulry?

  Hi team, support
  Customer email thunderbird whit, how can I create a trigger e-mail messages rule a phone dial when comes a word of the body particularly E-mail?

  Kind regards
  Alessandro.

  I don't think you can do this with ordinary Thunderbird. But this add-on

  https://addons.Mozilla.org/en-us/Thunderbird/addon/FiltaQuilla/

  allows you to run javascript or IIRC, launch an external program when a given filter condition is met. So this does not exactly provide an answer to your question, but allows a possible solution. '

• How can I create a separate address book? I'm not on a mailing list but an address book where addresses are not mixed with my usual address b

  How can I create a separate address book? I'm not on a mailing list but an address book where addresses are not mixed with my address book regularly. I already have three created for me by Thunderbird address books. Add all new addresses to one of those, I'm not afraid to remove the other address books, because some of their addresses are not repeated in my address book "main". So if I delete all the names in one of the existing books, I need to create a blank book that will not mix the addresses with those of an another address book. HOW CAN I CREATE AN ADDRESS BOOK EMPTY? I want to be able to create multiple mailing LISTS using the addresses in this new book, I will eventually have an address book special with a variety of mailing lists, that I can use as I want to.

  In the address book, file | New | Address book.

  No menu showing "file"? F10 or ALT.

• NB100 - How can I create a recovery on a USB CD?

  Hi friends,

  I recently got a NB100 with XP home. The operating system has been reinstalled and did not have any CD of the operating system.

  Given that I have not an external CD drive how can I create a recovery on a USB CD. I would like to see the function of USB USB just like the CD in case something really goes wrong.

  Can some help me to find a tutorial to do this?

  Thanks for your help.

  SAJ.

  Great! Thanks for sharing this with us!

• I have problems of space on my iPhone 6. I have only 21 photos and 2 videos on my phone. However, I am on a discussion group on whatsapp. How can I create more space for my phone? I also have very few applications on my phone.

  I have problems of space on my iPhone 6, I have only 21 photos and 2 videos on my phone. However, I am part of a chart group on whatsapp. The problem now is that my storage space is almost full. How can I create more space for photos and everything?

  You cannot create more space for everything.  All you can do is remove apps, photos and especially videos to make room for other pictures and videos.

• On a flyer, I need to produce black and PMS color. How can I create a PMS color (instead of something on the color wheel).

  On a flyer, I need to produce black and PMS color. How can I create a PMS color (instead of something on the color wheel or RGB)?

  It depends on the application. You use an inDesign application of PAO as Quark XPress, or something else?

  Many consumer apps is not able to output CMYK or specific pantone color combinations.

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.

• How can I create my own template pages, to print a 4-page newsletter on both sides of the tabloid-size paper?

  How can I create my own template pages, to print a 4-page newsletter, using both sides of the tabloid-size paper?

  The finished newsletter should be a folded booklet: a piece of 11 x 17 paper folded to form a 8.5x11 "booklet". This clearly means pages 1 and 4 should be printed on one side of the tabloid sheet and pages 2 & 3 on the other.

  I can't find such a model in the Pages.

  There is no such a model, so you'll have to make your own, using a spread on presentation of your newsletter.

  Use shapes, images and text boxes to position available for your model.

  You didn't say what version of Pages that you are using but if it's Pages 5.x, it has no text boxes related so this will make it difficult and it's going to be a lot of manual work.

  Peter

• How can I create a progress bar in main vi

  How can I create a progress in primary vi bar can any1 help me... I have repeatadly m asking for help and no response 1... its very dissopinting...

  Hi Bellefroid,

  Take the horizontal progress bar indicator and give the value which is based on completed processes.

  

  Kind regards

  Adel T

• How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume with the rest of the inspection?

  New to Labview and NI Vision in general here.

  How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume testing?

  I want my inspection to execute algorithms on the acquisitions of two different images, where the break to change the settings of my DUT.  I thought that the breakpoint was working well when I'm in the configuration interface and I run the State, but it seems that when I run the inspection he jumps on the breakpoint and continues on the next stage of the inspection immediately.

  Are you running Vision Builder AI on Windows or on a remote target? If you have a remote target, which?

  On Windows, you can use a step of user input in the last tab of the Vision Builder AI tool palette.

  It will display a dialog box that is paused the inspection until you click on a button.

• How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

  Hello

  How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

  I'm transferring a 32-bit application on 64-bit.  In visual Studio, I added the 64-bit project configuration.  He compiled the source very well but the reports link errors:

  error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

  These, of course, are the functions OR that I use.  The NIDAQmx.lib has been added to the Input of the link property.

  Any help would be appreciated.

  Thank you

  -Neil shore

  Hi LaserShore,

  Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

  Already running 32-bit application? Have you changed references to the 64-bit version?

  You use Measurement Studio? If so some features are not supported with 64 bit.

  Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C

• How can I create several rectangles with a draw rect.vi

  How can I create several rectangles with a fire rect.vi? Thank you

  Like this...

  -DP

  

• How can I create a language pack for Windows 7?

  How can I create a language pack for Windows 7

  No! You can use the language packs provided by Microsoft. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/