How can I fix "exception processing message C0000013.

Similar Questions

• How to fix exception processing message c0000013 parameter 75b6bf7c 4 75b6b7c 75b6bf7c

  Hey brother until a weakness I have this error I do not know how to remove, I tried os a lot, but it is still present on my desk that one help thanks in advance.

  Hello

   
  Method 1:
  Start the computer Safe Mode and check if the problem persists. Check out the link and follow the steps.
  
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  Method 2:
  If the problem does not occur in Mode safe mode, and then configure the computer to boot into the clean boot state and check. Check out the link and follow the steps.
  
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  
  Method 3:
  Follow the steps below and check out them.
   
  1. Click Start > run.
  2. Type in regedit and click ok.
  3. You will get a pop-up window in the registry.
  4. Click on + sign at HKEY_LOCAL_MACHINE.
  5. Click on + sign at SYSTEM.
  6. Click on + sign at CurrentControlSet.
  7. Click on + sign at control.
  8. Click on windows there.
  9. You see ErrorMode key on the side right panel 0x00000000 (0)
  10. Double click on ErrorMode and change the value to 2 and click ok.

      Now, you must restart the computer.

   

• Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  I get this message pop up randomly. Any ideas on how to get rid of it, or what to check. I can leave the computer, walk and pop message. Makes me crazy.

  Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  I was looking for a solution to this error and found the blog entry from GFF #5 to be the answer.

  http://forums.techarena.in/Windows-Update/1009223.htm

  "The answer lies in the words" Windows: No. disc ', your PC is looking for a USB.
  device - a USB stick or a cell phone, for example - that you recently plugged
  and removed without using the option 'remove hardware safely' in the
  lower right part of your screen. The last USB device you used
  back in the USB port and then use the option 'remove the software safely.

  The pop up message will disappear. »

  In my case, I didn't plug the USB device, I just need to click on the "Remove hardware safely" in the system tray and it say remove the device that is connected is more.

• A message Windows - no disk Exception Processing Message c0000013 parameters 75b6bf9c 4 75b6bf9c

  Hello

  How to solve the problem of my computer with this message Windows - no disk Exception Processing Message c0000013 parameters 75b6bf9c 4 75b6bf9c. It appears everytimes I start running my computer.
  After a few minutes work on my pc that these messages is displayed. clicking on it after about 5 - 6 times makes it disappear for another 2 minutes, until it again...
  Thanks in advance

  Mark

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• Stat of the system upward with the error: Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Original title: Getting a weird error message. Seems to be the floppy driver.

  Hello. This problem everything seems to start when I changed my drive letters. Finally, I think it points to my floppy drive A.

  I get these error messages when I start my computer. Windows tells me this: No. disc: "treatment of Message of Exception c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". It happens about 8 or 9 times then goes away.

  I have several internal hard drives, 2 optical drives, A floppy drive, a card reader and a printer. I decided to shift the drive letters down after hard drives since I have recently installed a dual-boot and needed earlier letters to the editor. The problems started before the dual-boot has been installed. Changed this example of drive letters: g-i, h-> j > I-> k, etc. The main readers have remained the same.

  I uninstalled the floppy drive and the controller, Windows re - installed after re-booting of course.

  I disconnected Ribbon floppy motherboard and the power supply. The messages stopped. I then uninstalled the floppy drive and the controller in Device Manager. I reconnected it A floppy Ribbon and power, loaded windows reinstalled the drivers and then gave me the error emssages once again.

  I have a DVD of Windows XP Home Edition 32 bit SP3. Telling me to do a repair isn't the best idea, because nobody has explained how it works. When the DVD goes in the car or at the start: there is no repair function.

  Thank you.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• No disc: Exception Processing Message c0000013 parameters 75b6bf7c 75b6bf7c 4 75b6bf7c error.

  No disc: Exception Processing Message c0000013 parameters 75b6bf7c 75b6bf7c 4 75b6bf7c error.

  Hi I am running Windows XP Media Center version 5.1 SP3.

  Automatic update of MSFT is on. When he went to install the last update, this error started to appear. I remember offline a disk or flash drive. To remove I have to click Cancel like 10 or 20 times. How to solve this? Thank you!!!

  Hello

  Step 1: In some cases, the problem occurs because of a virus or malware. Before you try the following options, perform a scan of the computer. To do this using Microsoft Security Essentials, visit the following Microsoft Web site:

  http://www.Microsoft.com/security_essentials/default.aspx

  Step 2: If the problem persists, you might find that a device that has been previously deleted is still saved. In this case, you can solve this problem by removing these devices.

  To do this, click the remove the device safely in the notification area and remove any attached devices is no longer.

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• Exception Processing Message c0000013 parameters 75b6bf7c475bf7c

  Whenever I connect my Clip Zip to my computer I get the error message "exception processing Message c0000013 parameters 75b6bf7c475bf7c.

  When I click on SansaUpdaterInstall.exe, I get the same message.  It goes away after I click 'continue' several times.  I see that Sandisk updater is my menu programs.  I can access the Zip Clip and I see no problem.  I wonder if the update does not work or if it has other problems.

  Thank you

  I want to remove the update. Check here periodically updates if you want to, but I'm not aware of any bug fixes or improvements in the works, so I doubt that there will be none.

  In its current state (no update available), the update amounts to little more than nag-ware and slows down your system unnecessarily.

• Exception processing message c0000013 when start XP.

  I have the error message when W XP start: Exception processing message c0000013 parameters 75afbf7c4 75afbf7c 75afbf7c.
  I can't close this error message.
  What can I do?

  XP is maybe damaged.

  First of all, you should check the memory using www.memtest.org
  And test the HDD using Hitachi DFT (google is your friend)

  If these tests pass, you can try to return to a previous configuration. Press F8 at the startup of Windows start and select the last known good configuration.

  If this does not work, you may need to backup your data and reinstall Windows by running the recovery using your Toshiba recovery disc.

• Window - no disc - Exception Processing Message C0000013 interferes with the mode 'sleep'

  I get an error message when the computer attempts to enter the mode 'sleep', after the time runs out of screensaver.  It will not allow the pc go to the "sleep mode" and if I try all options listed... it starts then the mode "standby".  Sometimes, it appears immediately and I can ignore it by continuing the work at hand.

  The message is this: Windows - No disk

  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Options: Cancel try again continue

  Thank you... Joan

  It would be interesting to know what your system brand and model is and what your version XP and the Service Pack, but it's just a fantasy of mine that the Microsoft Answers forum would actually make for such things when a new issue is created.  This shortfall in crude in the development of MS Answers forums unnecessarily prolongs solving simple problems.

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Any error will always be displayed in case view the log, but you won't see any popups

  Reboot your system and check the things now.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

• Start the problem - Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Boot PC I started getting the error message next - Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c - anyone know how to get rid of this?

  Murray

  http://www.Symantec.com/business/support/index?page=content&ID=TECH144464

• Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS.

  Constantly receipt dialog box message "Windows - No disk" Exception Processing Message c0000013 parameters 75b6f7c 75b6bf7c 75b6bf7c; with the options to CANCEL, TRY AGAIN, or CONTINUOUS. By selecting CANCEL or CONTINIUE four times to close the box, but in a short time box reappears.

  I refer you here:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410

  You can expect ad try some things.

  You can actually ask why forums MS Answers just can not help with XP problems?

• While booting XP, do "Windows - no disk Exception Processing message c0000013" error

  During the first part of loading Windows, I get "Windows - no disk Exception processing message c0000013; Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c ".  Then I have the options "Retry, Cancel, continues.  Will work only "continue."  Windows will not load until I have deal with this message.  The message reappears while other applications are loading.  Simply, this started happening about 2 weeks ago and have tried everything, except food.  I don't know what caused this error, but I want to fix it.

  Thank you. Until I'm your response that I tried my PC Doc Pro ver 5 and it seems to solve the problem.  However, I went into the registry and made the proposal to change anyway.  Then, I created a restore point and restarted. Thanks again.

  todrico

• After logging in to Windows Gets an error message: Exception Processing Message c0000013 75.

  Original title: no disc dialogue Exception Processing Message c0000013 75...

  When I start Windows XP SP2 the dialog box next No. disc appears from time to time.  This started after I uninstalled the software incompatible with Windows XP.  The 75 begins a series of numbers.  The PC is several years old and did not know this before exception.

  Setting prevents just the pop-up message annoying - if there are some problems with the device, the event will always be recorded in Event Viewer.

  I've never had anyone report problems after you make adjustments - just that they are happy, that they no longer see the message.

• How can I fix an error message indicating "on line 115 stack overflow?

  How can I fix an error message indicating "online stack overflow: 115?"  on XP. thX)

  Honestly - you can get best results download and installation and then using Firefox for Facebook.

  Also, make sure that you update your Flash Player and Shockwave Player.