How can I fix low ram memory?

Similar Questions

• How can I increase the RAM (memory) for my computer to hp dc5750?

  I bought one of these pc hp dc5750 form small factor that invade now right-handed ebay.  It came with only 1gig memory 80gig hardrive and processor bicoeur AMD Athlon 64 x 2 2.0GH but I can not know the socket type I think it's an am2?  I'll update my AMD Athlon II X 2 215 2700 MHz proc @ in my hp p6203w, but it is an am3 I think and I was wondering if the motherboard will accept an am3 as my another hp witch will take either.   I had also (lots of memory Samsung - 2GB (2x1GB) PC2 - 5300U - 555 RAM NON - ECC Unbuffered 240-pin) off ebay thinking they were a matched set, but when I got them one had a 1R - 8 x and the other had a part number x 8 - 2R

  I was woundering if I ran these two stick and the two 512 original supplied with the pc that are 1R - x 8 a face cards will be it atcually be able to use all 3 concerts cuase I saw a diagram that shows the configuration of two 1gigs and 2 512 in slot 2 and 3.   but he said someithing on all correspondence.  Once I put them all in the computer it says there 3gigs but I don't know if it of using everything or if Im better off just runing the two 1gig sticks or both will have to be 1R - x 8 or 2R - x 8 (it is the motherboard that has all the right to side by side 4 memory slots and not in separated couples and the other model nuber 8305-65U)

  Oh yeh Im runing win7 64 bit

  Type of socket original title: hp dc5750 and memory?

  + 1 on the suggestion of Nirmal - contact HP support, but--

  All very hit and Miss. Miss Aries matching is not a good idea and miss-corresponding to the quantity (2x512MB - 2 x 1 GB) often fails. You can get lucky and the machine will start, but the RAM performance will suffer without worrying.
  There only seems to be a lot of people who are able to run the 3 GB of RAM (laptops for most), but it's a strange configuration.
  Better to have two sticks of 2 GB and (assuming that Win7 32-bit) only have access to about 3.25 GB of that you still get the benefit of the dual channel performance.
  I have an old (built in ' 05) PC with an AMD 939 socket cpu and experimented with two 512 MB and two sticks of 1 GB (I have 2x512MB sticks all the time), the computer does not start in windows with this configuration.

  AMD made a number of processors with the Athlon 64 x 2 designation. Several are socket 939, others may be AM2. He must know exactly what processor and the motherboard to know what are the components.
  If the RAM is DDR2, there is a chance of the cpu/motherboard are AM2.

  The upgrade to a HP or other OEM PC can be a minefield that they often use a design of the 'special' motherboard (if you use the HP chipset drivers this is probably one of their 'special'), and with 1 GB of RAM and only a 80 GB HDD in a matter of form factor small with a cheap food you get what you pay for.
  Personally - you better made to buy the parts from someone like new egg (if you are in the USA) and assembled the unit yourself. Basically, you try to make a silk on a scholarship...)

  EDIT: Just found this -.
  http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+business+desktops/dc5750+series+%28All+form+factors%29-upgrades.html

• error - operation of menu not valid and a lower-level exception occurred in ImportMPEG (importer) how can I fix this?

  When I export a file in Adobe Premiere Pro, I get the error: operation of menu invalid and a lower-level exception occurred in ImportMPEG (importer) how can I fix this?

  I am running Windows 8.1 Pro, Intel Core i7 - 5930K @ 3.50 GHz CPU

  RAM - 16 GB

  Adobe Premiere Pro CC 2015

• The lower part of the 1/4 of the entire screen has recently changed a black and beige bar. How can I fix it?

  I tried to change to full screen, I tried to restart, but it did not work. I lose 1 to one-quarter of the lower part of my display area. This is not the case in other browsers I have. How can I fix it? I did not use addons or changed anything
  Linda

  You are welcome

  Can you tell us what extension or theme caused this problem?

• The ITV player / You Tube keeps in memory buffer and sound cut since I have done a Windows Update. How can I fix?

  I did a Windows Update on my XP

  The ITV player / You Tube keeps in memory buffer and sound cut since I have done a Windows Update. How can I fix?

  What is the speed of internet connection?

  http://www.Speedtest.NET/

  Don't make sure that no firewall or internet security thing trying to block streaming.

  Install the latest version of Adobe Flash Player: -.

  http://get.Adobe.com/flashplayer/

• How can I get more RAM without having to buy a memory card

  HOW CAN I INCREASE MY RAM WITHOUT HAVING TO BUY A MEMORY CARD...

  I CAN DELETE TO INCREASE MY RAM?

  I DO DELTE SAVED ITEMS IN MY FAVORITES TO INCREASE?

  PLEASE INFORM ME PLEEEEEEEEZ!

  I HAVE NO MONEY TO BUY A MEMORY CARD

  ANSWER to > * address email is removed from the privacy *.

  Thank you

  "romantkwoman52" wrote in message News: 1e44900f-40a6-4ed8-9bb0-dc8b5c78db40...

  HOW CAN I INCREASE MY RAM WITHOUT HAVING TO BUY A MEMORY CARD...

  I CAN DELETE TO INCREASE MY RAM?

  I DO DELTE SAVED ITEMS IN MY FAVORITES TO INCREASE?

  PLEASE INFORM ME PLEEEEEEEEZ!

  I HAVE NO MONEY TO BUY A MEMORY CARD

  ANSWER to > * address email is removed from the privacy *.

  Thank you

  First stop typing in all capitals, as this is considered as yelling and is rude.
   
  RAM is physical memory and to increase the size of the physical memory in the computer, you need to buy more memory.
   
  There are methods available to physical memory, you have in computer programs, such as reducing the memory allocated amount to a shared video adapter, reducing the number of programs and services that are running when the computer starts, but deleting files from the hard drive of the computer will not increase the amount of available memory.
   
  This explains the difference between physical memory and memory available http://www.sharpened.net/helpcenter/answer.php?76
   
  http://www.jasonn.com/turning_off_unnecessary_services_on_windows_xp talks about disabling services (be careful here, because you may cause the computer to become inadmissible.)
   
  What ever you stay away from the optimizers registry or similar to the registry cleaner programs.

• When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix i

  When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?

  You set the font size to a size that is suitable for the size of the document.   Size of the document may vary everywhere.   To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size.  When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting.  So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action.  To work around the problem of changing the size of the printing I wrote a Script to use in such an action.  The script is used twice, there is a backup and restore script.   The first time that the script is used the script records the resolution DPI images in the metadata documents.  The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved.    If the use of fonts for the document 8 "will be resized to fit the print original size.

  In a script, you can calculate a correct font size to use.  Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed.  When you make using Photoshop UI you use your eyes and brain.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• Hi, I need for my files to end lower case (.pdf). When I download the files, it is automatically in PDF capital. How can I fix?

  Hi everyone, I need help. I need for my files to end lower case (.pdf). When I download the files, it is automatically in PDF capital. How can I fix?

  Hi Sarah,.

  If you could, it will be great since I have no use for him. I was under the impression that what I read before paying that there will be no refund. Thank you if you can get there. Are there other options that could help me with my problem though. I still need to be able to convert as many files in .pdf format, do not. PDF. Please let me know.

  Thank you once again.

  Tri Nguyen

• Windows xp professinal could not be loaded \i386\ntkrnlmp file could not be loaded. How can I fix it so that it loads?

  Cannot load windows xp because the \i386\ntkrnlmp file could not be loaded.  How can I fix it so I can use the computer?

  Hi RIVTOM,

  ·         Remember to make changes?

  ·         Can you start in safe mode?

  The error you mentioned could be either because of incorrect settings basic input/output system (BIOS) or a faulty memory random access (RAM).

  Method 1: Restore the default BIOS settings and see if it helps. Consult the manual or manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: If you understand and are confident the material processing of the computer, and then remove the two RAM modules, noting that slot is used for the module in which, clean the electrical contacts on the modules.

  Replace the first module (if there is more than one) take precautions attempt to restart your machine with just the module of memory installed, see how you go. Do the same with the other module (as applicable).

• How can I configure an IMAGE MEMORY FULL I need dysfunction anti virus software.

  I tried AVG, MS Essentials, AVAST antivirus, they make the permenantly active HD and the PC (XP Pro 2002, 2.5 GB of RAM, 2 GHz, AMD SEMPRON, 70 GB of FREE hard disk) unusable and ends up the accident, shows BEGINNING MEMORY DUMP but does not have one.
  I am contacting AVAST support, who need a COMPLETE MEMORY IMAGE I set option of the SYSTEM FAILURE of MINIDUMP which have not spared either, NOW I can't reset to COMPLETE DISCHARGE of MEMORY because the option is 'NOT' gone!
  CAN ANYONE HELP? How can I reset to DISCHARGE MEMORY FULL? How to make a DUMP of MEMORY to record? I have all the correct configuration as described virtual on C: set to auto config of good size.
  Help!

  What is your system brand and model?

  Do you have any type of RAID configuration with your hard drives?

  Do you experience a system crash and blue screen of death (BSOD)?

  If you are experiencing a BSOD, you think people AVAST is going to help you with this?

  Don't you think that your system has some malicious software on it?

  If you think you have an infection and can always go on the Internet, I scan with other software first, then see if you still have a problem with the configuration of the memory dump and if you do, then fix it.

  Of course things should work, but it makes no sense to try to fix something on a system where malware can hide.  Malware will sometimes afflict the debugging tools and options on your system that you can use to find and remove it.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.
  Just to review, here's what your settings should look like for a partial memory (usually suffixient for troubleshooting the BSOD) image:
  Right click my computer, properties, advanced, startup and recovery settings.

  In the system failure section:

  Put a check mark in the box "write an event to the system log.

  Put a check mark in the box "send an administrative alert.

  Uncheck 'automatically restart '.

  In the Write debugging information section select:

  Partial dump (64 KB)

  Set the directory small dumpster:

  %SystemRoot%\Minidump

  Click OK, OK.

  Restart your computer.
  If you see a BSOD and want to see if you can fix, follow these steps:
  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Download BlueScreenView here:

  http://www.NirSoft.NET/utils/blue_screen_view.html

  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.

  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).

  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt
  .  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How can I know what ram slot ram in there on my G4 imac

  OK so I have an imac G4 1 GHz version and I don't have any tools to open it to see what ram slots are empty for a ram upgrade how can I know what ram slot is free and opening the mac

  There is a user accessible memory slot. You can install a maximum of 2GBs. The memory of the plant is pre-installed.

• From itunes to an mp3 CD burned on a macbook OSX 10.7.5. The cd plays a sound skreechy in the wave cd player. How can I fix it?

  Burned a cd from itunes to an mp3 on a macbook OSX 10.7.5. The cd plays a sound skreechy in the wave cd player. How can I fix it? The cd will play the mp3 in the macbook. He play the cd or access my itunes music? I burn on CD documents successfully. But I've never burned audio successfully. Please notify. Thank you.

  For problems of audio on a CD (as opposed to combustion problems do not at all), you can often clear up by re-burning at a lower speed.  Use 2 x.  This setting is available in the dialog box burn the disc.

• message saying missing (UNCDMS.dll) and missing (windows search.exe.) How can I fix this. is there a download anywhere.

  message saying missing (UNCDMS.dll) and missing (windows search.exe.)  How can I fix this.  is there a download anywhere.

  I found the only thing that has worked will Microsoft .com and low loading a Windows Search 4.0 upgade.

  I installed it and now it works fine.  All blogs online even came close helping.

  I did recive the message when windows has finished initializing and when I tried to go the line.

  Thank you for your willingness to help.

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.