How can I get Windows 7 to play the old Readme.wri files?

Similar Questions

• I just installed a new drive faster. How can I get windows live mail from the old drive to the new drive

  Where are the files stored WindowsLiveMail?  Under what article directory.  I have "tons" of e-mail messages stored on the old disk and need to move them to the new drive faster.  How can I do?

  The location of the store folder, which contains all the messages, calendars and the account settings, is configurable by the user. The default location is
  C:\Users\{user}\AppData\Local\Microsoft\Windows Live Mail

  If the installer of WLMail is a record storage in the default location, it normally acknowledge and take into use if. The only user that would be required should reinstate saved passwords. If this is to succeed, the old and new installations of WLMail normally must be exactly the same construction. The storage location must be in place in the default location on the new drive before installing WLMail. Also, the current user must be the owner of the record store to its new location.

  If the old drive is installed on the same computer as the new facility in WLMail, you can point the Import Wizard to import messages to the old folder of the store. They will find under storage folders into imported folders.

• How can I get Windows Vista to stop the shortening of long file names?

  I copy the files with long names in .zip files. Whenever I drag a drag the file to .zip (also with a long name) file, it renames the .zip file in a much shorter name. This only happens on my computer, my wife can perform the same task that I'm with her computer, and it won't rename the file name. We're both under Windows Vista. Is there a way I can get to rename the files? Thank you!

  Hello

  Did you change your computer?

  I suggest you to check the status in safe mode and perform the clean boot and check.

  Method 1:

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  The names of files and file name extensions: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-names-and-file-name-extensions-frequently-asked-questions#badChars

• How can I get Windows 7 to recognize a (old) HP Scanjet 7400c as a fax

  Original title: HP Scanjet 7400 C

  Is there anyway to get Windows 7 to recognize a (old) HP Scanjet 7400c as a fax?  I can't find a driver.

  Thanks in advance.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver. If
  There is no trial versions of Windows 7, the most recent available.

  Drivers for Scanner HP Scanjet 7400c & downloads<- set="" to="" your="">
  Windows
  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?Product=59553&LC=en&CC=US&DLC=

  Scanner HP Scanjet 7400c support & troubleshooting
  http://h10025.www1.HP.com/ewfrf/WC/product?product=59553&LC=en&CC=US&DLC=en#.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do you get Windows 7 to recognize the old file extensions of Microsoft such as XLR, PFL, WPS, WDB?

  My Windows 7 operating system has been reinstalled just because of some problems.  Now it does not recognize some such as old Microsoft Works file extensions. XLR, WPS, WDB and PFL.  HOW CAN I THIS DIFFICULTY?

  You must install the program that created the file that is to say a version of MS Office or MS Works

  pfl file can be of various shapes, a pdf file requires Adobe Reader

• How can I get Windows XP without knowing the password?

  I received a laptop from a deceased parent and it has two user accounts and I do not know the password either.  No one in the family knows them either.  I tried CTRL DEL twice to try to get to the construction in the account administrator, but they may have set up a password for it too.  Is there anyway to get into windows on this laptop.

  I have a bit of computer knowledge, but very little.  I've read about programs to unlock a password but it seems that I should be able to get into Windows to use.  Please help if you can!
  Thank you
  AKJakey

  Hello

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• How can I get lively edge to play the Animation on the mouse once and then not play again if the mouse is located in?

  Hello

  I ache to get an animation playing once on a mouse pointer (mouse over / mouse enter) and not play again if the mouse is flown again. If I move the mouse over the animation plays perfectly, however when I move the mouse again it will restart the animation.

  You can try putting a trigger at the end of the animation timeline that mask the animation and shows an image of the poster. Or use an invisible box on top of the animation that controls your mouse over the event. Then have a trigger at the end of your animation that hides this dialog.

• How can I get video mp4 for playing the edge animate .oam on page Muse?

  Ok.  I'm pulling my hair out here...

  I am just placing a file of .oam edge animate with video on a page of Muse. The .oam contains a simple icon (that grows and shrinks slightly in a loop to draw attention) that, when clicked (event "on click") made a video .mp4 appear and start playing. Then the video disappears at the end, leaving the new icon (no controls - it just plays and goes when it's done).

  The animation/video playback works fine in edge animate and animate preview of edge browser but when I place the .oam file in my page of muse, the video does not play. I tried the same file without the event 'on click' where the video plays essentially on its own after a second aboard animate and edge Preview in the browser and even once, it does not read in Muse.

  It's embarrassing and I don't know how to solve the problem.

  Does anyone have any suggestions? My .oam file contains a .mp4 file a.webm file, although this will be part of a stand-alone Museum Kiosk and therefore does not need compatibility .webm.

  I'd appreciate any suggestions really.

  I thank very you much in advance!

  Mason

  HA!

  Doggone it! Somehow, I knew that it would work very well for someone else. This seems to be how these things go, isn't it? Exciting video, huh?

  In any case, I use Safari. I tried the image displayed in preview in the preview of the Muse and then tried in "Preview in browser" and it did not work for me. I just downloaded Chrome and will try to image previewed in there. Perhaps that will work.

  Holy crap!  I literally just released the entire HTML for the site of the Muse and opened it in Safari from there and it worked like a champ!  A problem with the perhaps "Preview in browser"?

  Well, color me happy! Perplexed but happy!

• I'll spend 6-6 s how can I get my health data from the old to the new iPhone configure everything as a new? I don't want to restore from a previous backup. Thank you

  I just got my new iPhone 6s, until now, I had the iPhone 6.

  as I use the Apple Watch I like to keep my health data but do not want to restore the entire backup to have a "fresh" iPhone

  Any idea?

  Thank you

  The only way to restore the health data is to backup the old phone and restore it on the new phone. You must use iTunes backup with active encryption, or backup to iCloud.

• How can I get Windows 7 to recognize my NAS drive as a file server?

  I just bought a new desktop computer with Windows 7 (the first time I used it at home).  I have three drives NAS; one of them is an of Maxtor Central axis.  I use the Central axis as a file server, it has Word, Excel and other Office files in addition to my music library and a handful of videos.  Whenever I try to open a document, say Word, Windows 7 does not show the Maxtor under my network.  It shows one of the other drives NAS (Iomega).  When I right click on the network, click "Open in a new window", I see the Maxtor drive. However when I click on it, Windows will open Windows Media Player.  I see only three songs, which aren't even mine; I think they were samples placed on the disk by an application.

  Other machines on my network (a computer laptop PC and Mac) continue to be able to see the of Maxtor Central axis.

  I can open my documents giving the fully qualified network path "\\Mca-054e16\Public", but it's a pain.  I can't map a drive letter for the drive; I just get the small circle who constantly.

  How can I get Windows 7 see Maxtor Central Axis like a file server and not only a media server?

  Thanks in advance for any help that anyone may be able to provide,

  Nolan

  Hello

  ·        How do you set up the network?

  ·        Have you used a Maxtor software?

  The Seagate knowledge base indicates that his NASwas released before the release of Windows 7. Therefore, it has not been tested in this environment and is not supported by Technical Support. http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=211931&NewLang=en&HiLite=Maxtor+central+axis+Windows7#note

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I get my dvd to play on my computer that it stop working all of a sudden

  I was watching a dvd on my computer one day and the next day it wouldn't load any dvd, how can I get my computer to play new DVDs

  Hi kevingayer,

  ·         What happens when you try to play the DVD?

  ·         You get the error message?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Run the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Follow the steps and run the fixit of the article.

  http://support.Microsoft.com/kb/982116

• How can I get windows vista sp3 on windows vista sp2?

  How can I get windows vista sp3 on windows vista sp2? I need this to start school as soon as possible. I have no idea what I'm doing

  SP2 is the latest service pack for Windows Vista.

• How can I get windows xp to recognize a new disk of 1 TB sata hard?

  How can I get windows xp to recognize a new disk of 1 TB sata hard?

  Hello NavarroIT,

  In addition to the previous comments, I have link for HD is not recognized.  It is an external drive.  However, without knowing the manufacturer of your hard drive, you will need to check on this end.  You may need to format the disk first.  I hope this helps.

  Microsoft Answers: External hard drive

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/external-hard-drive-is-not-recognized-in-my/8464edf9-d8b4-4afb-bd91-13d639c23c9c

• How can I get windows xp to open a new window each time?

  How can I get windows xp to open in a new window every time

  Hello

  Please continue with the following steps to support...

  Click on 'Tools' > Options preferences > Options > Tabs panel > tabbed browsing

  You should be able to specify a new window when you click on a link.  I hope that this information is beneficial.

  http://support.Mozilla.com/en-us/KB/menu%20Reference#w_48optionssf-49preferencessf

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I replaced my hard drive. How can I get Windows XP loaded on my computer? I've already paid the fee.

  I replaced my hard drive.  How can I get Windows XP loaded on my computer?  I've already paid the fee

  Hello rsmith3042000

  What kind of system do you have?

  Do you have an XP installation CD?

  Here are installation tutorials

  http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

  http://www.michaelstevenstech.com/cleanxpinstall.html

  If you had only a recovery partition, it's lost now so you might contact the manufacturer and ask for the CD recovery.

  .