How can I restart vista after a motherboard replacement?

Similar Questions

• How can I reinstall Vista after a HD failure?

  I have windows vista OS, well I did until the HARD drive failed and I can't get it back. How can I get the system operational again without buying a new operating system that I own it. ???

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I restore Vista after replacing hard drive?

  Hi I have a PC laptop toshiba stellite with basic windows vista preinstalled, I suffered a hard drive failure and I had to install a new hard drive, I did save the procedure hard disk original and recorded on the disc but the disc will not work on the new hard drive, I have still the product key for the original operating system can I how can restore the operating system to factory condition

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How can I restart Finder after resigning from the Force

  Rotation range ball led to check screen force to leave.  Finder (not answer) appeared at the top.  I clicked on force quit and my whole desktop disappeared.  I was in the middle of my backup to a hard drive Ext MacBook and am afraid to restart in the middle of a back-up.  What should I do?

  Click on its icon in the Dock.

  (142271)

• How can I stop Vista Service Pack 1 download... its stuck at 83% and clicking stop installation does not work

  How can I stop Vista Service Pack 1 download?  I tried to download the service pack one and its deadlock in 83%...after 5 hours I hit stop installation, but it just gray out and don't stop - I'm afraid to restart because don't know what will happen.  Help, please... I think that probably Norton it stopped completely download so I'm cutting of norton, but nothing is happening because I think that the serivce pack is stuck in the loop.  Any advice would be greatly apprecaited.  Can I reboot? Can I go back to a restore point?  Thank you

  Hello

  This problem may be due to Norton or other software. You can restart the computer and check. If all goes well, you should be able to boot to the desktop without any problem.
  The error message in the event viewer can point to the program which caused this problem.

  Reference:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in the event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can download the latest service pack using the article below and verify if you are able to install it.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

• How can I stop Vista to boot into safe mode? Vista does not meet F8 when starting upwards.

  How can I stop Vista to boot into safe mode? Vista will not run on F8 before Windows starts.

  Update: I did system restore and still Vista boot in safe mode. More, start > run > "msconfig" > tab "Startup" and "Safeboot" was not selected. Any other suggestions?

  Vista still restarts in safe mode. 'Safe Mode' will now appear in the four corners of the screen and "Microsoft (R) Windows (R) (Build 6001: Service Pack 1)" appears at the top to the center of the monitor. ???

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: How can I install Vista on my Satellite P300D without recovery CD/DVDs?

  When my laptop first starts, it was puttet off all by installing vista. now, when I started the laptop another time, I can't now. He is always shown text: Please wait... Installation from my point of view some time... but nothing happens.
  How can I install vista again? Toshiba didn t deliver a recovery CD/DVD.

  Thank you

  Hello

  At boot press F8 and choose the first option offered. It must be something like the repair of your computer. After doing this just follow the on-screen menu.
  When Vista starts successfully at first creating restore DVD using preinstalled Toshiba Recovery Disc Creator tool.

  Bye and good luck!

• How can I uninstall Vista and put Xp back on__

  How can I uninstall Vista and put Xp on, Windows Installer could help to put Xp back on?

  General information about replacing Vista with XP:

  A. on a computer OEM (HP, Sony, etc.):

  1. go to the OEM Web site and find the XP drivers for your specific model computer. If there is no XP drivers, you can not install XP. End of the story. If there are drivers, download them and store them on a CD - R or USB thumbdrive. you will need after installing XP.

  2. check with the OEM - either since their technical support site, either as - to see if you will cancel your warranty if you do this. If void you your warranty, you make the decision.

  3. If the OEM supports XP on the machine, call them and see if you can qualify to demotion and ask them to send you a XP restore disc. This is by far the easiest and best way to put XP on the machine.

  4. if XP is supported on the machine but OEM does not have a disk to restore XP for you, understand that you will need to buy a copy of XP to your favorite online or brick/mortar store retail.

  5. also understand that you will need to do a fresh install of XP, so if you have any data you want back first.

  6. If none of the above applies to you because you can't run XP which return (see point 1 above), the computer of the machine and buy a running XP instead.

  B. on a generic/home computer built (of the non - OEM company)-you will need the drivers for all your hardware. See the second link below for more details:

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• How can I restart my laptop?

  How can I restart my laptop, so I can start again from the beginning with my laptop... because I have no space and virus so I just want to start more so please if you can explain how can I reboot it so that I can know it would be a great help... .thanks

  You want to do is put to how you bought it(out-of-the-box)

  You don't say if you have a Vista DVD or not.

  If you do, go to Setup/Bios boot/market by pressing F2 or DEL depending on your computer and set the DVD to be 1st in the boot order, restart with DVD in this disc, load files, delete the existing Vista partition, create the new partition, formatt, install, etc..

  If Recovery DVD a manufacturer supplied with the computer, follow the instructions to restart via the same method of boot above order.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  If the computer manufacturer did not include Vista drive/s, there should be a recovery hard disk Partition.

  It's the way they do now, most of the time. We are supposed to do the recovery disks it ourselves, with the instructions included in the software of the manufacturer installed in the start menu > all programs.

  At the bottom of the splash Screen at startup/power on, there is usually a number key, F10 or F11, hit to start the recovery process, in order to resume the factory (out of the box) standards.

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Each manufacturer has their own way of doing a recovery to factory standards.

  Read the manual that came with your computer, consult their Web site on how - to - recovery or email/phone for instructions.

  And save all of your data before you do, as a resettlement wipe everything from your hard drive...

  See you soon. Mick Murphy - Microsoft partner

• How can I remove vista anti-virus 2011 form my computer?

  How can I remove vista anti-virus 2011 form my computer?

  Hello

  Vista Antivirus 2011 is known by several names.

  Vista Antivirus 2011 is a fake antivirus, a scam to get you to pay for it while he has no advantage at all.

  Uninstall XP Antispyware 2011 and the security of Vista 2011, Win 7 Internet Security 2011 (uninstall Guide)
  <-- read="" this="">
  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google
  to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• How can I reinstall vista on my laptop without a disc.

  How can I reinstall vista on my laptop without a disc. I have an acer aspire 4520 and INF files are missing, umbrella I don't have a disk to reinstall. without these files, I can't update any driver...

  Hello

  You can reinstall vista without a drive on an Acer if you never received a disc when you bought

  try to press Alt + F10 at the Acer splash screen after power on to start the relocation process

  Here are the different ways to reinstall vista;

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).

  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.

  Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.

  Help.

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection.  It shows for the connection?  You
  should leave this setting not selected, in which case Windows Mail will use the IE connection uses.
   
  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.
   
  If everything which withdraws, but you still have the problem, the account may be damaged.  Remove account, restart Windows Mail,.
  then recreate the account.
   
  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------
   
  "W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *
   
  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
   
  They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.
  which none seems to allow me to select a LAN (ISP) simple (without a password).
   
  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging tool
  to see or use.
   
  Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listed
  above and to the exclusion of any direct connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I just
  cannot operate directly.
   
  Help.
   
   

  Gary van, Microsoft MVP (Mail)

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• How can I restart the date and time?

  The date and time on my task bar have become desensitized. How can I restart the date and time?

  I can't access the same system for the date and time preferences.

  

  Have you tried restarting your Mac?

  See you soon,.

  GB

• How can I restart L360 - 14th Satellite Pro on an external keyboard

  Toshiba Satellite PRO L360-14F

  Saves energy Toshiba
  How can I restart laptop on an external keyboard, if it was shifted by the Toshiba power Saver in idle state?

  Sorry, but I don't understand exactly what you want to do?

  Why you want to turn on the laptop using the external keyboard?
  Why you n t, press the power button on the laptop?

  If you want to wake the portable computer from hibernation IE then you must press the power button.

  That s it.