How Cluster resources works without DRS?

Similar Questions

• Age of Mythology edition work without the game disc

  Original title: i own age of Mythology Gold edition and wonder if someone could tell me how this game works without the game disc (I still have it is simply for practical reasons)
  I have also heard people say in other threads that you're not supposed to do that, but I find that hard to believe when you can go to the website of blizzard entertainment, and they will give you instructions step by step to do this for all of their games

  Hello

  You may need to contact the vendor of the game for help.

• Use the case of the Cluster data without DRS storage store?

  Can someone tell me please the use case of the Cluster data without DRS storage store?

  Virtually no,.

  The only one that is useful is the aggregation of resources of data warehouses in a cluster data store. But it is aggregation of resources in its crudest form. When you create a virtual machine and the use of a cluster as the destination data store, you must always select the data store that will store the virtual machine.

  Storage DRS off =

  No calculation of initial investment

  No space load balancing

  No I/O load balancing

  No rule affinity VMDK

  No maintenance mode

  For this purpose a group of data without active DRS storage store is a kind of a data store folder.

• DRS cluster resource allocation and CPU

  Hi all

  I have a question about the allocation of CPU resources to the guests in an environment of DRS. I was under the impression that all physical CPU resources are completely abstract the guest virtual computer. However, I see the following behaviors...

  -J' have a cluster DRS with two ESX hosts ~ 59GHz of the total available CPU resources. Physical ESX host computers have several multicore 2.9 GHz (I don't have practical details right now but that is irrelevant)

  -J' have a linux comments running RHEL 3.0 which seems high on slightly less than 2.9 GHz.

  Now there are a lot of resources of cpu without reserve available to the cluster, but this particular virtual machine can't enter any allocation of processor more than a little less than 2.9 GHz.

  So my question is this: are VMs limited CPU resources to the maximum of available resources to a single physical processor on the host, or must it be able to recover more of the DRS cluster resources? (Assuming a single vCPU guest), I can't seem to find any material that provides black and white if that's the case?

  If an SSN processing power is limited to the total amount of CPU resources of a single physical processor in the host, which is recommended for a machine that requires more CPU resources? Adding an another vCPU (and running vSMP)? I was under the impression that vSMP should be avoided unless a particular SMV workload could truly take advantage of SMP?

  See you soon,.

  Ben

  Well, Yes, each vCPU is limited to the resources of a single processor - there is no aggregate CPU by VM resources.  In the end, son of vCPU of a VM are given for a single CPU.  The only way to improve the performance of the virtual machine, it is just as you wrote - add vCPUs if the guest operating system and applications can use.  The cost is that all threads of vCPU for a virtual computer must be taken together, so if the virtual machine is unable to make their use, the waiting time for this and other virtual machines could increase, degrade their performance of the processor.

  A little more info...  An ESX host has one or more contexts of material performance (SESC).  Each core is a HEC.  Each instance of a CPU hyperthreading is also a HEC.  Thus, for a host with two processors Quad-heart and without hyperthreading, the total number of sesc on the host is eight.  Another example; for a host with two single core processors and each processor supports hyperthreading, the total number of sesc is four.

  Each vCPU uses a HEC.  A virtual machine with two vCPUs will use two sesc.  According to VMware, ESX will try to prioritize different sockets for use of the VM before two hearts on the same socket and before hyperthreading sesc on the same socket.

• Access blackBerry Smartphones to backup data without using a phone smart blackberry. How does this work?

  I had a Blackberry 9700 and I made a back-up via Blackberry Protect App. My Blackberry is stolen and I want to transfer all data (approx. 600 phone numbers) from the back-up to my PC or to my Samsung Galaxy SII that I can borrow temporarily from a friend. Bottom-line: I need access to my back-up data without using a Blackberry device. How does this work?
  

  Hey Sourbag,

  Welcome to the community of BlackBerry Support Forums.

  You will need a BlackBerry to access these backup information. There is no way around it in BlackBerry Desktop Software.

• Apex can work without the oracle application server? How?

  My question is exactly what the title says.
  
  Apex can work without the Oracle application server?
  
  I heard that there need a webserver to work but not necessarily the oracle application server.
  Is this true?
  
  With ONLY apache installed apex can work on it?
  
  Thank you
  
  
  
  Don't forget to assign points to those who help you! (Mark the thread useful/correct)
  My home page
  
  Best regards
  
  Published by: Igor Carrasco on May 29, 2009 14:59
  
  Published by: Igor Carrasco on May 29, 2009 14:59

  Hello

  Take a look at the Setup Guide that covers all the different options you have (as there are a some variations).

  http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/TOC.htm

  But yes, in short, you can have a configuration where there is no external Web server that uses the embedded PL/SQL gateway.

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• HA with or without DRS (edition of the Enterprise vs. standard edition)

  Hello

  How does HA without DRS in a cluster with esxi 5.5 standard edition?

  If one of my esxi host is what will happen with my VM.

  Thank you.

  Alexandre KIEFFER

  Hi and welcome to communities,

  HA and DRS are separate functions and do not need to work.

  So HA without DRS is going to do what HA is supposed to do (or what you set up to do)

  If your host goes down, the virtual machines running on it will remain so and will be restarted on the remaining hosts in the cluster.

  Tim

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• How do Tempro works fine?

  I have Tempro version 3.3 on Windows7 64 bit with Satellite L850.
  The Tempro is only able to display alerts, but clicking on the details of the alert button results in a redirection to a URL has no any information or downloads related to the alert. Indeed, it redirects to a homepage: http://www.toshibamea.com/.

  I do not know how tempro works fine? and how to make the links to resources works fine?

  Hello

  Different versions of Tempro were released for Win Vista, Win 7, but also win 8

  This is a link to the official website of Tempro:
  http://www.Toshiba.EU/innovation/Gen...RO_W8_RELEASE/

  Details and further assistance concerning Tempro tool can be found here:
  https://www.Toshiba.EU/innovation/generic/TEMPRO_HELP/

  But to be honest, I would recommend using the Toshiba service station.
  This Toshiba tool is similar to Tempro, and it provides you with all the information about the new Toshiba Software and update tools and Notepad.

• How to watch 3D without glasses on Qosmio F750-11R?

  Hello, I know that this question has been asked many times before, however, I can't seem to find a useful answer (related to my laptop series) anywhere.

  Most of the time the answer is to re - install the X-tunes already pre-installed.
  It is not preinstalled. I updated all the drivers and downloaded all of the proposed programmes.

  It doesn't always seem to work.
  I can convert something in 3d, but then it shows just the screen twice vertically.
  I thought that this should be easy (as suggested by the ads and the very useful note packed with the laptop). I'm not a computer genius, but it shouldn't be this hard?

  Can someone please explain to me how to do this?
  In addition to the 3d dvd I would like to play MP4 and. AVI files as well.

  Thank you!

  Hello

  > How to watch 3D without glasses on Qosmio F750-11R?

  First of all its imporntat to know if your Qosmio F750 is equipped with a 15.6 LCD FHD GLASSES FREE 3D.

  Only F750 units with a glasses free 3D LCD supports 3D without extra 3D glasses.

  Find the plug on the page of Toshiba for the Qosmio F750-11R and unfortunately, it seems that the laptop does NOT support free glasses 3D display.
  http://nl.computers.Toshiba-Europe.com/innovation/product/Qosmio-F750-11R/1115695/toshibaShop/false/

  This is also the reason why the X-tune software was not preinstalled on your laptop

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• Help how to unlock 1838 without internet connection

  Dear Sir.

  I would like to know how to unlock/reset my Thinkpad 1838

  Too many attempts to model

  I enter my username and password not work also

  the table keep ask me sing in (it can work without an internet connection?)

  Please suggest another way to reset it thank you very much.

  allows so try through the bootstrapper.

  -stop the Tablet
  -Turn the power off and then reboot into bootloader mode. (To enter the Bootloader mode, press and hold Volume upwards the button and the whole power button.)
  -Default factory reset

• Can V5 591 G work without the built-in battery?

  Hi, guys!

  My laptop is connected when I use it and my personal experience, the guidelines of the Acer in the user manual and this link here http://acer.custhelp.com/app/answers/detail/a_id/2384/~/how-to-charge-and-care-for-your-acer-battery on how to extend the life of the battery, this can severely affect it, so it should better be deleted.

  Unfortunately, the battery of my model is not easily removable like on my previous laptop, so I would like to know, if I open the bottom cover and remove the baterry, will this void my warranty and will laptop funtion without the battery?

  It will work without the battery probably fine, but leave the battery in a drawer does not really the battery in good shape. If you leave it outside, you must challenge once in a while and let drain a little and recharge. I put a new in the drawer for about a year and a half and it degraded just sitting there.

  There is also the part of power failure. Without battery, the power goes off and the laptop just dies instantly. Not only you lose any possibly work, but it can cause system problems and sometimes damage the laptop.

  Modern power management circuit will prevent "overcharge" the battery, even if we let him load 24/7. He that is detrimental to the battery recharges 100%, let it drain completely or nearly completely then recharge to 100% several times. This puts a lot of wear and tear on cells.

  Try to keep your load between 20% and 80%, while making only a FULL load + discharge cycle once in a great while. This preserves the overall longevity of the ability of the battery to hold a charge. In addition, the cooler you keep the laptop, the better for the battery as well.

• How can I reformat without starting?

  I can't start my computer, just get a black screen with a small line of flashing at the top left of the screen. I'm sure I need to reformat, but I don't know how to do this without having to start! What should I do?

  It's a Toshiba laptop with Windows XP Home Edition. I don't think that there are service packs or w/e.

  Hello

  • What were the changes made before the issue occur?
  • How long have you been faced with this problem?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• Boxes wireless printer work without connection to the modem HP 6700 printer

  My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

  My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

  Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

  Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

  Thanks for your help

  Bill6700

  Bill,

  Welcome to the HP Forum.

  You don't mention what kind of computer of mystery that you have and try to use the printer.

  Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open printer HP Officejet 6700 Premium e-All-in-One - H711n drivers
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.