How common the like required field at the level of the user interface

Hi all

How to set the field as mandatory at the level of the user interface.

Thanks in advance
C.Karukkuvel

Set required = "true" on any input component.

Pedja

Tags: Java

Similar Questions

  • How is the user interface of the browser application made...

    Stock in BB10 Navigator seems to have a bar downstairs with an overflow on the side right which, when selected opens a 'Action' Menu and then on the left, there another button that, when selected opens a Menu "tab.  Can someone tell me how it's UI is done.  This flow is possible recreated at cascades...

    Is it possible to place a text field and a button image in an action on the bottom bar?

    Thank you

    The browser INTERFACE is actually built using HTML5, so you can have some difficulty doing so in the Cascades.

  • make the field required in the user interface

    Hello gurus.

    I use jDev 11.1.2.1.0

    I have a form that is based on EmployeesVO. Suppose I should do 'PhoneNumber' required field, but not by checking the required option in the EO.
    I have to do in the jspx only. It is not conditional, it must be! = null whenever the user tries to save the record (insert / update) or decides to insert another record.
    How to handle this?

    Thank you very much.

    Hi user,

    Choose which inputtext in the user interface. and you can see a property required in the property palette.
    link text with the bean this entry, then you can play with this inputtext. as you wish.

  • How to reset the Status field and delete ToDo list outside the user interface?

    All, morning

    HR 802 generating WebHelp.

    I made use of the status field and ToDo List in the past. For my next release aid, I would like to reset these fields for all the subjects, so I can still have accurate reports as subjects of creation/revision of the final course.

    Is it possible to do without opening each topic in the user interface and compensation/change manual fields? (I thought to delete all fields of ToDo and recreate them, but thought that there is an easier way.) This information appears in each section or in a separate file?

    Thank you

    Patrick

    Hi Patrick

    1. Close all topics that can be opened in the editor.
    2. Open the pod of the list of topics.
    3. Select all subjects.
    4. Right-click and choose Properties from the subject.
    5. Click the status tab.
    6. Modify if needed.

    All subjects should change to reflect the new status and the task list settings.

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7 or 8 days - $24.95!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

  • doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

    doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

    The portal_domain field contains;

    AdminServer (admin) and Enterprise Manager, (port 7001)

    IBR_server1, (port 16250)

    UCM_server1, (port 16200)

    WC_Spaces1, (port 8888).

    On the same machine, I have another weblogic, admin and for the ITS.

    The case is that continued to develop for the upgrade to the new skin WebCenter content.

    That's my goal.

    Then I did some research and came to the following notes in support.

    1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

    https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

    and

    2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

    https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

    The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

    And the list of patches;

    ===================================================================================================

    Installed products of higher level (1):

    Oracle WebCenter content management install 11.1.1.8.0

    There are 1 products in this House of Oracle.

    Installed products (40):

    Cloning of the 11g Application Server 11.1.1.8.0 component

    Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

    FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

    FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

    Component install SDK 11.1.0.9.0

    Oracle Application Server Configuration 11.1.1.7.0

    Part of Oracle 11.1.1.7.0 Bali

    Oracle 11.1.1.8.0 capture

    Common files Oracle WebCenter content management 11.1.1.8.0

    Oracle Content Server 11.1.1.8.0

    Content of Oracle 11.1.1.8.0 Server component

    Content access Content Server Oracle 11.1.1.8.0

    Access to the contents of the Oracle Content Server 11.1.1.8.0 files

    Oracle Content Server Core 11.1.1.8.0

    Oracle 11.1.1.8.0 server content distribution

    Oracle extended Windowing Toolkit 11.1.1.7.0

    Oracle Fusion Middleware Admin Config 11.1.1.6.0

    Oracle Help for Java 11.1.1.7.0

    Oracle Help for the Web - UIX 11.1.1.7.0

    Oracle Help for the Web Shared Library 11.1.1.7.0

    Oracle Help share library 11.1.1.7.0

    Ice browser Oracle 11.1.1.7.0

    Oracle IRM                                                           11.1.1.6.0

    Oracle extended JFC Windowing Toolkit 11.1.1.7.0

    One-time correction of Oracle 11.1.0.9.9 installer

    Oracle outside in technology 8.4.0.0.0

    Oracle Remote Client of Intradoc 11.1.1.8.0

    Component of Oracle 11.1.1.7.0 rules

    Oracle SOA 11.1.1.7.0 workflow

    Universal Oracle install 11.1.0.9.0

    Oracle Upgrade Wizard 11.1.1.8.0

    Oracle Upgrade Wizard 11.1.1.8.0

    Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

    Oracle WebCenter Capture 11.1.1.8.0

    Oracle Webcenter content - rights 11.1.1.7.0 documentalist

    Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

    Oracle WebCenter content management install 11.1.1.8.0

    Oracle WebCenter content 11.1.1.8.0 management product suite

    Oracle WebCenter content: Imaging 11.1.1.8.0

    OracleAS Documentation 11.1.1.8.0

    There are 40 products installed in this House of Oracle.

    Interim plates (2):

    Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

    Patch ID: 17263162

    Created February 5, 2014, 12:56:41 pm

    Bugs fixed:

    15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

    14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

    16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

    15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

    16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

    17560900, 14246603, 15941347, 16045712

    Location of patch in the inventory:

    / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

    Patch location in the storage area:

    /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

    Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

    Patch ID: 17182855

    Created February 16, 2014 20:35:48 hrs PST8PDT

    Bugs fixed:

    17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

    17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

    17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

    17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

    17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

    17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

    17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

    17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

    17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

    17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

    17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

    17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

    17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

    17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

    17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

    17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

    16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

    16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

    16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

    17424037, 17006115, 17171834

    OPatch succeeded.

    ==============================================================================================

    And contains the following configurations in config.cfg

    ==============================================================================================

    SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

    xPortalSecurityPropagate = true

    Web server = javaAppServer

    AllowUpdateForGenwww = 1

    SearchIndexerEngineName = OracleTextSearch

    IndexerDatabaseProviderName = SystemDatabase

    AdditionalEscapeChars = -: #.

    FileEncoding = UTF8

    MaxQueryRows = 2000

    DisableAuthorizationTokenCheck = true

    IntradocServerPort = 4444

    SchemaPublishInterval = 604800

    SSAllowDelayedProjectWrites = true

    IdcServerThreadQueryTimeout = 120

    DisableQueryTimeoutSupport = false

    MaxSearchConnections = 20

    #Cache

    UseSearchCache = false

    #

    #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

    # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

    MaxAccountsInSecurityClause = 300

    # end (Doc ID 1639028.1()

    #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

    DoCaseInsensitiveAcctSearch = false

    # end (Doc ID 1676468.1()

    #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

    ==============================================================================================

    To my UCM_Server1 content WebCenter.

    As I already have a WebCenter content I have to follow the second part of the note

    How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

    Install and configure content WebCenter ADF WebUI against WebCenter Content Server

    Step 1) install the MDS schema

    (Step 2), install the Weblogic Server

    11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

    Step 4) Download and apply Patch 16, 546 129.

    Step 5) Download and apply Patch 16, 546 157.

    Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

    Step 7) copy the wccadf files in the field of user interface

    Step 8) Oracle on demand services (MDS) metadata registry

    Step 9) Place the WebCenter content domain user interface model

    Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

    Step 11) updated the Oracle ADF of shared libraries

    Step 12) start the domain WebUI administration server

    Step 13) Save target Managed Server with the MDS repository and create the metadata partition

    Step 14) start the server managed WebUI.

    Step 15) associate UI WebCenter content to Content Server.

    Step 16) reboot the WebUI ADF server managed.

    Step 17 access the WebUI

    Step 18) complete the Configuration of the workflow

    Step 19) apply the latest Patch Bundle content UI of WebCenter

    MY DOUBT IS:

    To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

    I have two servers weblogic?

    portal_domain (explained above) and a new wccui_domain wls and domain.

    This fix it?

    Two WLS to keep WebCenter portal and content, and other elements.

    Because I'm not able to do with the WLS even where I UCM_server1 today?

    Thanks for all suggestions and criticism.

    To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

    I have two servers weblogic?

    portal_domain (explained above) and a new wccui_domain wls and domain.

    This fix it?

    Two WLS to keep WebCenter portal and content, and other elements.

    Because I could not do with the WLS even where I UCM_server1 today?

    Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

    This is due to a problem with ADF and WCC libraries.

    With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

  • How to make a required field in OAFramework

    How to make a required field in OAFramework when running? Please explain in detail if possible.

    Thank you
    Kumar

    Get the handle to the bean by using the following Code

    Bean = webBean.findIndexedChildRecursive ("");
    If (bean! = null & )
    {
    bean.setRequired (true);
    }

  • How to change the size of the user interface component

    Hello

    How can I change the size (width and height) of the user interface component?  For example, I want to set the width of a ListField and add a scroll bar (horizontal). Thank you.

    Young

    GetPreferredWidth and getPreferredHeight methods can be rewritten to change the requested dimensions of a field.

    However, this does not mean that a field will support horizontal scrolling with only this change and can vary depending on the field.

  • How do the management interface of configuration of an ethernet interface?

    We have an ASA 5540 requiring a LAN port for failover. And the left side of the interface available only the management port. How do the management interface of configuration of an ethernet interface?

    You can disable the mode of management only on this interface to make as regualr routable port and use for other purposes, including the purposes of failover LAN database.

    On the management interface - 5510 but applies generally to the management0/0, itself including 5540

    http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

    Basic LAN failover configuration

    http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

    Rgds

    -Jorge

  • How can I change the language of the user interface

    It seems that some efforts on l10n had been put in the latest TP. My host OS is Win 7 x 64 (Simp-Chinese) and I find that the user interface has been localized.

    As I have no option to change the language, could someone tell me how to do?

    BTW: I also noticed that some channels have not translated yet while some translations need to be improved.

    I wonder how can I report a l10n issues. As this community is English, I don't think I can report it here.

    Thank you.

    A solution from a member of the VMTN community. And it works:

    If you want to change the workstation to English user interface, you can open Control Panel, open "regional language and ' and change the format to"English (United States). Workstation displays in English.

    He also mentions that the l10n process is not yet complete. So I guess it would be better for people like me to inform after the final version.

  • How to get TS::SequenceContextPtr to customize the user interface

    I want the file of the custom, user interface sequence value therefore need to take stock of the TS:equenceContextPtr, anyone know how to get this point.

    Is there a reason that UIMessages are not enough?

    Just off the top of my head, here are a few concerns with the not not using UIMessages:

    1. How the user interface is unknown when the file of the sequence is developed to set the value.  Without an event or some sort of synchronization you can do exactly that.  UIMessages not only to ensure the right information, but they help also with synchronization.

    2. The engine does not know this information, and view of execution manager knows that the information for the current execution it is linked to (which changes throughout the life of a series of tests).  Basically, recall of front end, model, and other factors may spawn short executions briefly related to the Manager view of execution.  So if you take the context of the sequence of the current run is perhaps not the right one.

    3. Writing a user interface will be couple the user interface to your specific sequence file.  At this point, you can use the network variables or global variables or global queues as well.  It might even be better options.

    The situation you describe is exactly why the UIMessages were created.  Maybe you can help me understand why you are set on the use of pointers, you already have?  There might be a better solution for your case if I'm misunderstanding you.

    Thank you

  • How to get an array of integers to user in the User Interface

    Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

    I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

    General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

    What is the best way to get an array of integers through the user interface?

    The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

    More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);

  • How can I update the user interface controls in the UI thread

    Hi all

    I want to do a custom image to display this URL source support.

    I start a thread to ask the image of the network data, and then update the display of the image with the data, but I get the error:

    ApplicationPrivate::resourceManager: ERROR called from the thread of user QThread (0x81eeb8c) interface
    ApplicationPrivate::resourceManager: A user interface thread named method

    It's my code segment:

    class URLImageView: public CustomControl, public QThread
{
public:
    URLImageView();
private:
    void run();

    ImageView* mImageView;
    Container* mRootContainer;
};

URLImageView::URLImageView()
{
    mRootContainer = Container::create().background(Color::Gray).preferredSize(100,100);
    mImageView = ImageView::create().image(QUrl("asset:///button.png"));

    mRootContainer->add(mImageView);
    setRoot(mRootContainer);
    start();
}

void URLImageView::run()
{
    //get data from network
    //...
    //...
            //create image from binary data        Image* image = new Image(pixelBuffer);
    mImageView->setImage(image);
}

    I know that in the old BB OS (Java Platform), I can get the lock of event request like this UI:

    synchronized (Application.getEventLock())
{
        // I can update UI control here
}

    Is it same way to Cascades BB10 or what is the right way, if I want to update the user interface in the UI thread?

    Thank you

    This looks like what signals are useful for, when it is connected with the option QueuedConnection. I don't have a link for you, but I'm sure that you can get with this description.

  • How to intercept the sockettimeout exception message and display in the user interface of the view?

    Hi my jdev - 11.1.1.7 version

    I ask a socket connection in my AM and I want to catch the exception of the sockettimeout of t and display the error message in the user interface of the view layer.

    I use customException class that extends DCErrorHandlerImpl, but if we use try catch, then exceptions doesnot reach customclass.

    How to catch exceptions and return to view the layer if we use the operation binding. ?

    Because you call the operation via the link layer, which is perfectly fine, you do not get an exception at all. Exceptions thrown in methods called via the link layer are captured by the framework and transferred to the appellant in the operation binding.

    For that, you get the list of errors after the call returns and add them as messages of faces

    execute the method

    Method.Execute ();

    List errors = method.getErrors ();

    If (! errors.isEmpty ()) {}

    handle errors errors here is a list of exceptions!

    We only get the first

    E receive = errors.get (0);

    FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, e.getMessage (), "");

    FacesContext.getCurrentInstance () .addMessage (null, msg);

    }

    no error return to normal work

    Timo

  • How to use the Shell of the user interface with multiple applications (ear)

    I use 11.1.1.6 JDeveloper.

    I want to modularize the functionality in applications (ears) and use the Shell of the user interface as a navigation mechanism between applications and single entry.

    Is this good?

    What is the use of Shell of the user interface best practices.

    What about security (2 AA)? Security of the ADF?

    Thank you

    Hi user,

    You can use the shared library ADF function if you would like more information

    http://andrejusb.blogspot.AE/2010/07/deploying-ADF-applications-as-shared.html

    use the adf security

  • How can I change the size/scale of menus of the user interface in CS6?

    Recently got a new laptop to work running windows 7, CS6 and menus of the user interface are almost unreadable. Help, please!

    I can't tell you how many times I hear it, and it's something that has to work on Adobe. The problem that you are running is that, as our instructors to expand and the resolution increases, all the elements in our software applications (buttons, menus, etc.), are getting smaller. Your only current option is to reduce the screen resolution of your computer. To do this, right-click on your desktop, and then choose the resolution of the screen. Slide the resolution down until everything is readable for you. Usually, something in the neighborhood of 1280 X 800 works but it is very subjective for each user.

Maybe you are looking for