11.1.1.3 install, resolve the host name different machine name

Similar Questions

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• Q10 Q10 blackBerry WIFI - browser error - could not resolve the host name

  Hello

  I use my Q10 while overseas for the Wifi only. My SIM card is in my 9900 (thank you BB not to tell anyone that BIS no longer works and WW BB roaming is not until after people buy OS 10 devices, anyway...) but I want to use the Q10 for Skype, browsing and Email while on WIFI.

  Skype works.

  Browser gives "Could not resolve the host name" and charge no emails.

  WiFi network is good (the 9900 is connected and works, as do other devices). I reset the phone, router, etc. etc.

  All to nothing does not.

  A telephone conversation of two hours with T-Mobile (from abroad) was unnecessary and disconnected.

  All DNS data seems to be there.

  Please help.

  Thank you

  Aviv

  Hello

  Problem solved.

  I have reset the router before, nothing helps. The only way I got it work is as follows:

  (1) turn off the router and wait for the phone to 'do not see' to the network in question.

  (2) turn off Wifi on the phone (menu setting and tap on wifi)

  (3) restart router

  (4) restart the phone

  After about 10 minutes, it is finally connected.

  Thank you all,

  I would BB would have simply kept the features of the 9900 and just made more attractive to the masses, instead of making an iphone with a keyboard...

• Workstation 8: Upload failed: Curl error: could not resolve the host name

  I have workstation 8 connected to our ESX host, it shows all the machines and allows me to connect to their end. But when I try to copy/paste/drag and drop a local virtual machine over there he said "Vmware workstation 8: Upload failed: Curl error: could not resolve the host name.

  Someone at - he fell on this or have any ideas why this would be. I think that if it does not find the host name, I could not navigate or connect to my Virtual Center.

  Hello

  Whats is your ESX host name? I would recommend using with full ESX host name during the connection. You can connect to the ESX host using the host name, but to download the VM in this topic, you will need to use FULL of ESX host of domain name when connecting.

  Please try to do it and let us know if it solves your problem.

  Thank you

  Deep

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• Remote touch the codec using the host name - matching cache of IPv4

  Pairing for some of the features of my remote client contact is often lost/broken. It uses the DHCP protocol for codecs and uses dynamic DNS entries as 'host name' at the time of the twinning contact to the codec devices.

  While this works for pairing at first, it seems the cache keys resolved IPv4 address of the codec instead of the host name. Whenever the IP address of the codec changes, the pairing is lost.

  Am I wrong? I came to the conclusion that codecs must be treated using static IPs or DHCP reservations for Peel remote to work reliably
  Click Select codec manually..., enter the IP address or host name of the codec and tap Start matching.

  THX
  / David

  Appears this is a limitation of the Touch and/or codec, see bug CSCua05282.  The contact must use the IP address, which is why when you entered the hostname of the endpoint it solved its IP address and used it.

• Problem of Listener after changing the host name & ip address of a node

  Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
  
  Thanks in advance.
  
  Kind regards
  Sandy
  
  Published by: 918868 on October 26, 2012 20:21

  issue following commands OS below

  lsnrctl stop
  CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
  MV listener.ora listener.ora.sav
  lsnrctl start
  lsnrctl status
  # now wait 65 seconds before continuing as below
  lsnrctl service

  COPY orders & results from above, then PASTE it back here

• Cannot ping the host name of the operating system in vmware after intall kaspersky antivirus 2009

  Dear all

  I use windows xp professional, and XP, I use vmware workstation 6.0.2 I installed RHEL4 in vmware.

  I was able to ping the host name of the guest operating system after you have entered the information (192.168.1.2 appserver.ibcs appserver)

  in the C:\WINDOWS\system32\drivers\etc\hosts file. But after installing Kaspersky Antivirus 2009, I couldn't ping to the

  Comments more bones by host name. But if I remove kaspersky anti-virus it pings again.

  ............ Can someone give me any solution please

  Check your firewall Karspersky rules. Set the IP of comments as a secure IP.

  Concerning

• By specifying the host name for the database during installation

  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.
  
  Published by: user4928701 on July 8, 2011 23:15

  user4928701 wrote:
  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.

  Published by: user4928701 on July 8, 2011 23:15

  lsnrctl stop

  move/rename listener.ora to new/other file name

  lsnrctl start

• How to dynamically retrieve the host name of the server APEX?

  Hello
  
  I have request Express installed 3.1.0.00.32 on 2 servers in a configuration of dataguard, which means I can failover from one server to the other.
  
  The problem I encounter is the URL. I wrote a beautiful PL/SQ/procedure to send mail, in the body of the mail it is a URL that points to a hard-coded host name (teleg1:7777)
  

  BEGIN
  ....
   l_url := 'http://teleg1:7777/pls/apex/f?p=109:29:::NO::P29_ID:'||C1.ID ;
  ....

  It can occur I the digital switchover to the other server which name would be teleg2, but then the url change because the host name is "teleg2:7777".
  
  It should be like this:
  

   l_url := 'http://teleg2:7777/pls/apex/f?p=109:29:::NO::P29_ID:'||C1.ID ;

  Is there a way to retrieve the host name of a global variable of APEX, something like G_HOSTNAME? Or from another source? As a result, the procedure is as follows:
  

   l_url := 'http://||G_HOSTNAME||:7777/pls/apex/f?p=109:29:::NO::P29_ID:'||C1.ID ;

  The varialbe G_HOSTNAME would contain etiher "teleg1" or "teleg2" according to the APEX server that executes the PL/SQL procedure at this time.
  
  I hope I am clear.
  
  Good day!
  
  Christian

  Use the functionowa_util.get_cgi_env . You'd be interested in CGI environment variables SERVER_NAME and SERVER_PORT.

• HP Pavilion 360: How can I change the host name of files?

  I need to chance the host name of file on my PC I do not know how?

  Ok. Thank you. I'll give it a try!

• How to have a different DNS host name to the host name of VICTORIES?

  How to have a different DNS host name to the host name of VICTORIES?

  You are welcome-

  Chapter 18, "Dynamic Host Configuration Protocol (DHCP).

  http://redhat.activeventure.com/9/customizationguide/ch-DHCP.html

  Chapter 7 - resolution of host name

  http://TechNet.Microsoft.com/en-us/library/bb727005.aspx

  And, again

  TechNet Windows Server Forum

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

• To change the host name of the device WAE

  If I want to change the host name of one of the WAE machine in my network, can I just rename it through Central Manager GUI? It is possible through CLI as well? Would the database of this device kept in CM by the change of host name?

  Thank you!

  Joe

  Hey Joe,

  You should be able to change it without any impact. In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit. I would like to know if this is the information you were looking for? In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit.

  Kind regards

  Kanwal

• VPN site to site by using the host name on cisco asa 5540 - dyndns

  Can someone help me configure VPN site to site on cisco asa 5540. The other end is seen configured dyndns and so should set up her counterpart with the host name.

  If the other end is a dynamic IP address, you must configure a dynamic map and then use in the encryption card

  See the following example.

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00805733df.shtml

• IKEv2 - xml file and the host name

  Hello world

  Ikev2 anyconnect works very well in the PC.

  Xml file in c\programs data\profile PC hostname say anyconnect_ikev2.

  Under the ASDM - anyconnect profile I changed the host name to say xyz.com.

  Then PC I tried to connect again and found that the connection has been established and the hostname under xml view profile: PC go to xyz.com.

  Need to know how the PC has managed to connect even if the host name has changed?

  Concerning

  MAhesh

  Mahesh,

  The client connects to the base on the HostAddress profile field.

  Host name, is what is used to populate the drop-down list and identifies the connection in "plain language." Although it is often the COMPLETE domain name, it doesn't have to be.

  When a user makes the connection, one of the things that happens is that any changes in profile on the ASA is pushed to the locally stored user profile.