Boot fail error bios checksum after bios update

Similar Questions

• APXINWKB: ERROR FRM-40105 AFTER SEVERAL UPDATES TO FDF INVOICE

  Hello

  I enabled AP invoice header FDF and I am facing after publication.

  Scenario of
  1. display an AP invoice in the invoice workbench
  
  2 - Click on the header flexfield and update. Save the changes.
  
  3. without re-mark Bill, update any header flexfield (i.e. a second flexfield update), and then click Ok to save the changes. Results:
  b in the summary Bill block, the cursor moves to the next line, creating a new invoice
  (b) error message is displayed in the toolbar State APXINWKB:
  FRM-40105: unable to solve the reference in article
  
  4 - Click back on the original Bill, to display the message with this error:
  APP-SQLAP-10186: Please validate or clear your changes before continuing.
  
  Click Ok, then get this message box:
  Do you want to save the changes you made?

  
  

  I followed after discussion on metalink

  
  

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=402258910466899 & ID = 1386884.1 & DisplayIndex = 1 & _afrWindowMode = 0 & _adf. CTRL-State = ok9fn34gb_127

  
  Bug 13512892 : APXINWKB: ERROR FRM-40105 AFTER SEVERAL updates TO BILL FDF

  https://support.Oracle.com/epmos/faces/BugDisplay?_afrLoop=401729639374078 & ID = 13512892 & _afrWindowMode = 0 & _adf. CTRL-State = ok9fn34gb_77

  
  

  Bug 7609800 : Could not CLOSE THE POP-UP ERROR of FDF ON BILL AP.

  https://support.Oracle.com/epmos/faces/BugDisplay?_afrLoop=401753618582257 & ID = 7609800 & Refresh = N & _afrWindowMode = 0 & bugProductSource = _adf & Oracle. CTRL-State = ok9fn34gb_102
  

  
  

  Got the hotfix mentioned in Bug 7609800 applied on my instance but still question exist.

  Please help if anyone knows the solution to this problem.

  
  

  Thank you
  

  
  

  
  

  Hi Cheryl,

  My problem has been resolved, just wanted to share it here.

  I created a folder with no query and set it to the default value.

  Then I moved the FDF which was originally at the end of the header to a few fields left line. It is not at the end.

  This way my problem has been resolved.

  Hope this will help if someone else must face the same question.

  Concerning

  Siraba

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• Sudden appearance of error STOP C000021A after automatic update of Windows

  Everyone knows a sudden STOP errors after that update Microsoft has done for his actions in the background? I'm setting up a SL500 for a client who has crashed all of a sudden with a STOP C000021A error. This error number (and the minidump file) point about csrss.exe crashing. The machine is no longer usable in 'normal' mode but it does not start in "safe" mode A review of the microsoft update log file reports the accident happening right after that the update ran. Before I nuke XP and opt for a restore to factory (as well as reinstall/configuration) I would like to know if others have seen this happen recently.

  In response to my own question here: I managed to do that work again. It turns out that the automatic update is more or less malware Microsoft's "Office Genuine Advantage". Remember, once again, why people accept this type of behavior of a business entity... No, not only to accept but reward in continuing to do business with them. Something in the water maybe?

• Satellite L755 after error - BIOS update service is not a warranty case

  The problem began when Toshiba Tempro program notified me that I need to update bios for my laptop Satellite 755. I have downloaded the file to the Toshiba site, followed all the instructions. The process - there was error check. Tried twice. The same result. Decided to not update at all.

  But after that the next reboot of the laptop has not started. Black screen, cooler works like breathing.
  After searching the Internet I found there are hundreds of people with the same question. Which of course was not my fault.

  As there is no solution for this - the only way was to send the Toshiba laptop service.
  I wrote them a letter before, provided all the details, what happened. Also asked if it would be covered by the warranty. My laptop is still on warranty, purchased just half a year ago.
  Received an email from to SAV (Damax AG), I have to send my laptop and that * it's still on warranty *.

  Without any hesitation I sent them my laptop.

  After several days, I received a note that:
  1. it is not a case of warranty I was updating the BIOS. Come on guys, I wrote it you before I sent the laptop!
  2. for the repair of motherboard, I need to pay 1350 (!) swiss francs (the price for the new laptop is about 600 Swiss francs!).
  3. I can refuse the repair, but in this case, I still have to pay 100 Swiss francs for diagnostics.
  Why the hell should I pay for the diagnosis, even if the laptop is still on warranty + it was pretty clear what the problem was, like many people in the face of that, and Toshiba service for sure shoud be aware of this problem.

  What could advise you in this situation?
  These are the sons of the same question. I'm sure this is the problem on the side of development of Toshiba.

  http://forums.Toshiba.com/T5/drivers-and-utilities/satellite-L755-S5216-BIOS-2-0-update-leads-to-quot-verify-error/TD-p/203226
  http://forums.Toshiba.com/T5/computer-troubleshooting/laptop-L755-dead-after-BIOS-install-attempt/TD-p/205326
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/BIOS-L755-beware-of-Toshiba-fix/TD-p/270171

  Also, there are many cases that people have written that it is covered by the guarantee - which was one of the reasons that I sent him. For example here:
  http://www.theeldergeek.com/forum/index.php?showtopic=45500
  The guy writes: + "guarantee-box...". 0, no data not deleted, everything goes well =) ' + '.
  How even a service covers it - the other is not?

  Also, I read the guarantee agreement - I have found no info that this case is not coverable.
  Really frustrated by all this, I am a student, and of course I don't have extra 1350 francs to pay for it.
  Also, I'm really screwed as it has research papers which I can not finish normally like all my data on the HARD drive.

  Hello

  Please don t get me wrong, but I don't really know what you want to read here. It is user in the forum and here you will not find an official statement here. All you can do here is to share your experience with others who have the same problem.

  I put t know how many services are listed for your country, but please try to communicate with other services and see if they will tell you the same thing or maybe there's something now about this BIOS problem.

  If you have more information, please report it here. It may be useful for other owners of L755.

• Satellite C660 - 1st PSC1SE - project ID verification fail while BIOS update 1.40

  I have a laptop Toshiba Satellite C660-1ME (part number: PSC1SE-00G009AR).

  I tried updating the BIOS with the latest version 1.40. When you run the update of the BIOS gives this error "* project ID check fail *" what to do? How can I solve this problem?

  And read all the thread on this problem but no change.

  Hello

  I recommend this thread about the same error message:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64817
  It seems that the new file has been downloaded and seems that the problem has been resolved in this case

• Re boot in the BIOS updated

  I have a thinkpad edge type: 03017gv SN: LRFCW2. Yesterday I was updating the BIOS and the machine hung up for 4 hours during the update of the bios. Finally I turned it off.

  Now, I can't start the machine.

  Nothing happens when I turn on the machine! No flicker of movement or record screen. Is there a way to turn it?

  Neil has soon

  You brick machine, you will need to send it for warranty repair and get a new motherboard fitted.

• Screen error black patch after reinstalling/updating VISTA on my desktop HP Paviill a6137c,.

  I have a HP Pavilion a6137c desktop purchased in 2007 with Vista 32 bit OS.

  My original factory hard drive failed [multiple power cuts in the short period of time] the error screen says "bad sectrors" well I could substitute these areas [somehow] and I continued to use the player for a few weeks/months before the "bad sector" error came again.

  I bought and installed a WD Caviar Blue SATA 320 GB Hard drive model #WDBAAX3200ENC-NSPS.

  I still have the old hard disk installed but not hung in the second Bay from the HD.

  After you have installed the origianl software [I bought HP factory records a couple of weeks], Vista Home Premium 32 - bit, I ran Windows Update with its updates 106 or 107, he recommended.  After completing the update and restart, Windows does not load, I get a black screen and invites me to restore to a previous restore point.  Paragraph of error message basically says that he was a "'patch', causing the problelm, but I don't know which.»  I apologize for not sending you the error message I get, I had restored the computer before thinking to copy.  I'm under update again and if I get the error again, which I'm sure I'll [because it is the fifth or sixth time I've restored and re run upd8 er] I'll send over the error message if necessary.

  Thank you very much for your help!

  Ann Bailey

  As of this minute, I'm re-running the updates and plan to run Microsoft FIX IT

  Thank you for your offer to help, I don't have the error this time, assumes that the FIX WORKED program! Yay!

• KKKKK application fails to work even after the update of the latest graphic drivers

  I'm portable Inspiron 15R 7520 (SE) and I installed the kkkkk application that does not work even after updating to the latest drivers from the manufacturer, dell.  I also tried to run this application high performance, but it still does not work. I get an error message saying "your graphics driver seems to be updated. KKKKK requires updated drivers to update run. Updated now? "And then by selecting YES, Intel website is displayed when the last driver update is available for download. After you download that, driver is not installed as new error shown saying "the pilot is not validated for this computer". Kindly help me to solve this error.   Thanks V.Raikar.

  In order to run kkkkk with no errors, you must reinstall or download the installer kkkkk offline

  and if you encounter an error than to follow this guide

  www.thesoftwarehax.com/.../Solve-bluestacks-Graphic-Card-Error-25000-Windows.html

• Windows live Error 0x800ccc0d mail after security update

  Can't send or receive messages on behalf of the Vertical. The host 'mail.xxx.com' is not found. Please check that you have entered the server name correctly.

  Server: 'mail.xxx.com '.
  Windows Live Mail error ID: 0x800CCC0D
  Protocol: POP3
  Port: 110
  Secure (SSL): No.
  Socket error: 11004

  Please note that the host name has been adjusted for intimacy, host "mail.xxx.com".

  I am on Windows 7 and have seen this problem with Windows live mail and Mozilla thunderbird for the latest updates of windows through 8/18

  I assured my server name and the password are correct and can't seem to access my mail through their individual sites (the accessible GMail account atwww.gmail.comsuccessfully)

  I tried the clean boot my machine but also ensure that my firewall to allow both programs to run.

  Help, please

  If you think that the problem was caused by a Windows Update, you can remove the update or restore the system back to before installing updates:

  Remove an update:
  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  What is the system restore:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Try the steps are on the links above and let me know if they help!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All-in-one HP Photosmart C309a "Alignment failed" error message even after cleaning the print heads, etc.

  About 3 weeks ago before making the error msg above, a large black ink blob appeared on my printed piece of paper.  This product for several sheets later, but kept decreasing in amount.  I continued to print & finally all traces of ink have disappeared.  2 days ago I got a msg of error on "load plain white paper. ", but the paper tray was plain white paper in it.  I have removed the paper, straightened and her successor. As a result, the msg "Alignment failed" appeared.  I went through all the steps HP online information on the treatment of the "alignment failed", including the cleaning of the printheads (the right amount of ink was on it), check the vents of cartridge, etc.  My question is: if I have 4 out of colored inks and a new black ink installed, the alignment is being affected by the old cartridges?  A msg on this appeared on the Control Panel, giving the opportunity to proceed with the old cartridges or install new ones, but be careful that it "cannot allow completion of...» "If 'old' were replaced not.  I need to replace these color cartridges or is it probably another problem, which is print head damaged?

  Checked the evacuation & there is no problem, so I tried the informal solution to put the printhead in hot water.  A ran 1 cleaning via / configuration on the printer and finally aligned with success tools.  I waited a while to respond because I wanted to see if the printer should continue to work, and there!

  Thank you very much.  I'm happy that I can keep this printer!

• Qosmio G50 - 12K - BIOS update for support of 8 GB of RAM?

  Hello

  Just, I improved my Qosmio G50 - 12 k to 8 GB of RAM and installed Windows 7 ultimate 64-bit. Windows see 8 GB of RAM but can only use 4 GB. I have the BIOS version 2.0.0 I wanted to upgrade to version 2.10 'P0060v210.exe '.
  When I run the BIOS update, I get this massage [error] BIOS update is not supported for operating system. Unsepported OS or service pack installed.

  I'm really naïve about what to do. Qosmio G50 - 12 k BIOS can be updated to support 8 GB of RAM?

  Help, please!

  Thank you d ' assign eliot

  Hi eliotah,

  In my opinion BIOS update worth the try!

  But I put t understand why you can t do this update. Have you installed Toshiba Value added Package? In my opinion it of needed to start the BIOS updated.

• SmartView keeps poping "Decompression failed" error after upgrade

  Hello
  
  2 weeks ago, we have improved our Windows Server running essbase from 2003 to 2008 R2. After that users upgrade continue to receive the "Decompression failed" error when working with Essbase. That they are currently using client versions 11.1.2.0 and 11.1.2.1.
  
  We tried to capture registry settings for the connection timeout side customer 180000 and later 900000 ms without success (http://essbaselabs.blogspot.com/2010/02/smart-view-timeout-settings.html). The "Decompression failed" error always comes after the session timeout.
  
  It seems that the "Decompression failed" error has replaced the previously thrown error "connection timed out".
  
  Someone at - it ideas?
  
  Thanks for all the ideas...

  Have you tried the following:

  update after the entry as true in the essbase.properties file:
  SmartView.WebService.gzip.compression.Disable = true

  It was the setting in earlier versions 11.1.2 should not interfere with any of your existing worksheets
  try it

• Cannot boot after BIOS update

  Hi, I recently bought a laptop Inspiron 5000 series, and because the touchpad control was just horrible I did a check for updates and upgrades. The update includes an update of the BIOS I plugged the laptop and ran the update. When it restarts, it failed. All I see is a boot failure:

  The family Realtek PCIe controller error. Media Test failure UNDI. No found boot device.

  I couldn't do a safe boot, but when I tried to get around the boot legacy and UEFI boot it will start.

  I am quite unhappy that a BIOS update (version 1.1.9 was the old version and 1.2.2 was new) caused this. The laptop is only 4 weeks old if I want to get this resolved.

  What should I do?

  You need not Mech system program.  This is what DellCares told me to do it on Twitter:

  Turn on the machine, key to tap F2 on startup Dell logo, it takes you to the BIOS screen. Go to the "Startup" tab, select "start list Options", change the option to "Legacy" to "UEFI".  Restart the machine, it should load correctly in Windows.

  -----

  I must point out that many others on twitter had already told me to try the same thing.  A person has explained why this has happened.  He said upgrading the BIOS changed the start to the legacy option when we UEFI.  Enter the BIOS and change this back solved the problem, so he's probably right.

• Portege M800 no boot after BIOS update

  Hello

  I encountered some problems with my netbook (Portege M800-10W) after the BIOS update.
  The update of the BIOS program appears failed. Then my Netbook automatically rebooted and now I can't start my PC more.
  All the LEDs will light up but the screen remains black and after a few minutes, the beep 3 times (1 long, 2 cm) netbook.

  How do I restore the BIOS to the previous version (or plant)?

  Thank you.

  Adrien

  null

  Hi Adrien

  I think that Akuma is right. Your laptop must be verified by the service of Toshiba s. Let check your laptop and I hope they will help you with this.