How do I configure Intel Smart Response on my hybrid drive

Similar Questions

• XPS 8700 - Windows 8 w / Intel Smart Response Technology re - install

  Hello community,

  My hard drive in my XPS 8700 failed recently. I got a replacement and have installed the new drive in the chassis. It's the only drive (2 TB), but I also (30 GB) SSDS for Intel Smart Response Technology.

  I have a problem with the OS / Intel Smart Response technology Setup. I'm trying to (re) install Windows 8 of the disc. When I run the installation of the OS, just after choosing language preferences a screen will appear indicating that a media driver is missing.
  "Load driver".
  A media computer driver needs is missing. It could be a driver DVD, USB or HDD. If you have a CD, DVD or a USB flash drive with the driver on this subject, please insert it now.
  Note: If the installation media for Windows is in the DVD or on a USB drive, you can remove it safely for this step. »
  I guess it's regarding the pilot of SORTS. I tried to put the pilot SORTS on a USB but it is not detected when browsing.
  "Load driver".
  No pilot of the plane have been found. Make sure that the installation media contains drivers and then click OK. »
  I need help ensuring the RAID and BIOS are correct before installing Windows 8 with TRIE. Currently, neither the SSD or HARD disk created a RAID Volume (note No changes have been made in the BIOS, but the existing RAID configuration has been removed from the SSD).
  Emergency assistance would be greatly appreciated.
  Dell XPS 8700
  Windows 8, 64-bit, English
  2 TB hard drive 7200 RPM SATA + Intel SRT (30 GB Lite-On SSD MSATA)
  24GB Dual Channel DDR3 1600 MHz - 4 DIMMs

  In collaboration with a Dell technician by CAT, we have identified the problem with the driver files SORTED on the USB. I tried to download from the driver and Utilities disc that came with the computer, however the correct files are not extracted from the USB.

  The tech located the driver appropriate and after extract the USB driver has been detected.

• Windows 7 in a VM can use the Intel Smart Response Technology?

  I want to run Win 7 in a VM under Xen. Is it possible to make use of the Intel Smart Response Technology with Win 7 in a VM?

  Hello Ivan,.

  Welcome to the Microsoft Community Forum.

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Problem starting Windows 8 (associated with quick start + Intel Smart Response Technology SSD cache)

  Hello
  I have a problem with the fast start-up of Windows 8. When I shut down my PC everything works fine, but when I turn on the PC, Windows will load until a certain point and then suddenly start screen appears again. The second departure is always successful.

  I discovered, when I turn off the Quick start, the computer starts without error on the first attempt. It goes the same for when I disable Intel Smart Response Technology (SSD cache). There are no problems when I use Hibernate mode.

  Recently I did a BIOS update, so I don't know if there is a setting in the BIOS that is may cause this error?

  Thanks in advance for any help!
  Martin

  Hi Martin,

  Glad to know you solved the problem. Thanks for sharing of the resolution, because it would help the other members of the community to the same question.

  Please do not hesitate to answer, in case if you need help or information on this issue.

• How can I configure the parameter response on my email. So that when I send someone he lets know me that they have received.

  How I sat the adjustment of the response on my email. So that when I send someone he warns me that the receipt?

  It depends on what email program you use and the recipient has no obligation to send the receipt.

• Y510p and Smart Response Technology - cannot be enabled

  Yesterday, I received my new Y510p from NewEgg. It includes a 1 TB HDD and an SSD of 24 GB. It comes with Windows 8, I don't want to use. Therefore, I decided to clean the system completely and install Windows 7.

  I have overshadowed the two disks after the firmware in legacy mode, changed the "OS" setting by default optimized to "Other OS" and performed a clean installation of Windows 7. Drivers Intel Smart Response show no indication that the acceleration is possible. I then remembered that the controller must set to RAID for this feature to work. However, the firmware doesn't have this option: the only choices are AHCI and "Compatible" (for IDE mode).

  How can I get RAID to appear here, so that I can properly configure SRT? Or y at - it another way to get this working?

  The Y510p don't use SRT Intel. It uses Expresscache for SSD caching. To see if expresscache is working properly, follow the link below:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT074404

• Smart response caching: HARD + SSD on Inspiron 15R drive SE, mSATA value SRT, still no button "Accelerate."

  Hello

  This is probably a common problem that has been explained earlier, but I cannot find an answer here-I found describing almost the same question, but still not the same as the son.

  So I have a cool Inspiron 15R SE with pre-installed Windows 8, 1 to HDD and SSD 32 GB on mSATA included for caching purposes. The problem is that, as far as I can see, without acceleration/cache that really happens with my SSD as just another drive.

  In the BIOS my mSATA operation is set to 'Intel Smart Response technology' which seems to be a good option for caching. Looks like on this screenshot I took from another thread, the yellow highlighted option is selected in my system:

  

  But when I boot in Windows 8 and run the Intel Rapid Storage Technology technology, I don't see "Accélération" button / tab - as if my drive is not eligible or is in the wrong mode. This is the screenshot of my Intel utility for you to see there is no option to activate the cache:

  

  If it's relevant, my SSD drive appears in my disk management console and is also available as a regular drive in Explorer and other files with a drive letter assigned managers (guess which indicates the acceleration is not in use).

  There is also a Hibernate (8 GB) on this disk partition, but there is still enough for caching (mandatory min 16 GB, 20 GB left) free space. Should I try to disable hibernation? My hiberfil.sys file is on the HARD drive so that probably won't help. Here is a screenshot of another utility pre-installed from Intel, Intel Quick Start Technology Manager, if this might be relevant:

  

  Any ideas are much appreciated, I've been strongly trying this additional disc and it was actually the main reason for me to choose this particular laptop model. It's a shame, I can't use it for some reason any.

  Thank you very much!

  I found the answer. To activate the acceleration must be no. PARTITIONS on the SSD drive even if it is still not enough allocated space.

  If the partition of QuickStart technology, with that my laptop came prevented Rapid Storage to accelerate.

  After I deleted all partitions on the disk, it worked.

  If you still need the partition of quick start or for other purposes, you can specify less space for acceleration during the installation and create your partition later.

• How can I configure back upwards to use drive F on windows 7

  How can I configure regular back up to the R drive instead of drive E

  Tuesday, October 9, 2012 12:38:44 + 0000, sidneygough wrote:

  How can I configure regular back up to the R drive instead of drive E

  You say 'F drive' in the subject line "R drive" above. Who is
  It?

  What are drives E, F, and R? Is there other drives? Other
  partitions on your hard drive only? CD/DVD readers? Something else?

  If F (or R) is another hard disk or partition on your only hard
  by car, you want to do is better than no backup at all, but just
  barely. It is a very poor place to put a backup.
  I do not recommend backup on a second partition or second no removable
  Hard drive because it leaves you losses likely to be simultaneous
  the original and backup for many of the most common hazards: severe
  seeds of power, near lightning, virus attacks, same flight of
  the computer.

  In my view, secure backup must be on a unguarded and removable media
  in the computer. For backup really secure (required, for example, if the)
  the life of your company depends on your data), you should have several
  generations of backup and at least one of these generations must be
  stored off-site.

  You can read this article on the backup that I wrote: 'save '.
  "Your computer regularly and reliably" to
  http://www.computorcompanion.com/LPMArticle.asp?ID=314

  Ken Blake, Microsoft MVP

• How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using a single SMTP account?

  How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using only a single SMTP account?

  In other words, I need to download via POP3 messages sent to the * address email is removed from the privacy *, * address email is removed from the privacy *, * address email is removed from the privacy * but I want to send messages using Mar SMTP service associated to * address email is removed from the privacy *

  If I get a message like * address email is removed from the privacy * I want to answer as * address email is removed from the privacy *.

  Is this possible?

  How can I configure Outlook Express?

  Concerning

  Marius

  You can do this if the Server SMTP allows you to send from a location that you are not connected via their internet service.  So if you have this permission, go to tools | Accounts | Add mail.  Then under the account of property | You want to set the server for incoming mail to the POP3 account, and then the SMTP protocol for the other account that you use to send servers.  And then indicate whether or not the server requires authentication, and if yes, then you will need to put in the user name and password for the SMTP server it.  Under properties. Advanced to define appropriate ports that may be different from the default value according to e-mail accounts.  You can also check the "leave a copy of messages on the server" for accounts POP3, if you access messages from multiple computers.

  Once you have an account set up, then you can set others upward in the same way, but change the POP3 properties for each while leaving the SMTP ones the same.

  Once you have all that in place, you might want to backup things in case something goes wrong: www.oehelp.com/OETips.aspx#6

  Steve

• How can I configure network server in blackberry phones smart blackBerry bold 9700

  How can I configure network server in blackberry bold 9700

  I want that my third-party applications to access the organization intranet using your organization's network.

  When I tried to change the permissions of third-party application, it shows RIMconnections, interactions, data from the user... don't allow, deny permission is there.

  How can I set thesehttp://docs.blackberry.com/en/smartphone_users/deliverables/23895/Third_party_application_connection...

  Yes, if you read the link you posted, these settings are for OS6 and higher devices.

  Not for OS5 and you're on OS5.

• How can I configure my xps8500 as my boot drive ssd

  Hello

  I just got a xps8500 with 2 TB HD and SSD of 256 win7. Win7 is installed on the 2 TB drive and I would like to clone or re - install everything on the SSD and make my boot as well as all other programs (photoshop/lightroom) drive. Is there an easy way for this to be done? I've cloned a HD in a laptop before and wanted to see what to do for this on my Dell. Any info would be greatly appreciated. Thank you.

  Cup Check - You could read

  en.wikipedia.org/.../Smart_Response_Technology

  and

  en.wikipedia.org/.../Intel_Matrix_RAID

  I have pretty much the same system you have, even refurbished.  I think that there is an 'image' of the saved or cached on the SSD drive, operating system and (perhaps) when the computer starts, it first "looks to" the C drive but sees while there is an image of Windows 7 on SSD and "bounces" to there and starts on the SSD.

  I think so.

  After I used my new computer several times and checked 'properties' on the drive (SSD) J it was not 256GB available, but about 236 GB.  Windows 7 is apparently about 20 GB.  After that I used several times for Flight Simulator X, drive J had about 201 GB free.  According to ME, since I had loaded Flight Simulator several times a program has decided to keep also on the SSD.

  This technology is quite recent (2011) and there are not yet many computer experts who can explain it in terms we're moderately savvy computer can understand.  This first article says that it only works for as large as 64 GB SSDS, but article is not all references later in 2011, so I guess these technologies Intel Rapid Storage Technology (IRST) and Smart Response Technology (SRT) have been expanded to make use of all of the 256 GB SSD on our computers.

• How can I configure Windows 8 to remember my wireless keys?

  How can I configure Windows 8 to remember my wireless keys?  I have 4 SSID in my house, and whenever I connect to either of these wireless networks I re - enter the wireless key, even if I have already connected to it several times before.  Windows 7 remembers them as do Apple products.  It's really annoying.  (Please do not recommend 3rd party stupid WiFi8 app - it is undesirable)

  Yes, I meant Windows Defender, I apologize.

  I solved my problem by taking the direction of the Intel PROSet/Wireless WiFi connection utility WiFi card. I have the system configured to allow the Intel tools manage the WiFi, but Intel for some reason any would forget that he had the credentials. When I put management back to Windows 8, the problems disappeared.

• How can I configure an image at its actual size?

  How can I configure an image at its actual size? Let's just say my image 800x800px dynamic object. I place it in a project of 400x400px. I put on the scale the image several times, and I don't remember its original size, for the sake of argument. What I can do to get it back to 800 x 800 and where can I check to see if it is 800 x 800 I know I'm not more?

  If it's a select of the smart object layer, go to free transform mode and then check the updated image to scale in the toolbar options at the top of your screen. The scale factor will continue to be updated every time you to scale the layer. It is not reset back to 100% as a regular layer.

• How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  You can not. Two Apple factor authentication is a feature of iOS and OS X, based on your AppleID being associated with iCloud account to send and receive authentication 6-digit codes. An AppleID that is not associated with iCloud account cannot be used for 2-factor authentication.

  For Apple ID - Apple Support two-factor authentication

  You can set up validation in 2 steps (which is different) with any AppleID - see frequently asked questions about check in two steps for Apple ID - Apple Support

• How can I configure the cell data format

  How can I configure data format of cell numbers: for example, I want to capture 123456.78 and need to be 12A3456.78?

  I tried to put #A # #. # format option, but it didn't work a few time and it became A123456.78.

  I also tried on excel and it worked very well, but I like the numbers better. is there a solution to this problem?

  Thank you

  HEY Chi - Lun,

  I don't think that this is possible as many number format. You should be able to insert A in a text string using a formula, but this would happen in a second cell, not that the number has been entered.

  "Assuming all the"numbers require the same inserted letter after the second number, this should do the work."number" entered in column A; the formula in column B. In the table below, your value as an example is A6.

  = Left (A, 2) & "A" & RIGHT (A, LEN (A) - 2)

  

  Kind regards

  Barry